IRUS Advertising cube 40.121 User manual
System
®
exhibition
Assembly instructions
for the Advertising cube 40.121
constisting of:
- 4x Aluminium proles à 500 mm incl. 8 bores
- 8x Aluminium cross proles with pointed screws for the lower and upper mounting
- 4x PVC foam boards à 952 x 446 mm
- 8x H-proles à 434 mm to stabilize the panels.
- 4x Ring screws M10
4x
8x
4x
8x
4x
System
®
exhibition
Important during assembly
Pointed screws must be used for all proles that have holes.
1. Mount the bottom cross proles
including the pointed screws to
form the corner.
2. Insert the lower panels with the
H-proles and then mount the cross
proles.
3. Mount the required lower cross
proles including pointed screws.
4. Insert the remaining panels with the
H-proles one after the other.
5. Mount the cross prole incl.
pointes screws.
6. Turn the ring screw in the
aluminm prole.
Other IRUS Rack & Stand manuals
