Panasonic NR-BV361B User manual

Operating Instructions
Refrigerator
For Household Use
Model No.: NR-BV361B
Contents
Safety Precautions .................................. 2
Usage Precautions .................................. 4
Installation ............................................... 6
 Parts Identication ....................................8
Operation Panel ............................................ 9
Temperature Control............................... 10
ECONAVI Operation............................... 11
Quick Freezing....................................... 11
Prime Fresh+.......................................... 12
Fridge compartment .............................. 13
Prime Fresh case .................................. 14
Freezer compartment............................. 15
How to clean the Refrigerator ................ 17
Troubleshooting ..................................... 20
Specifications......................................... 22
■ NON-CFC
This unit uses totally NON-CFC MATERIALS both for refrigerant (R600a) and for
insulation (Cyclo-Pentane). So, this refrigerator does not damage the Earth’s ozone layer.
Thank you for purchasing the Panasonic product.
• Please read these instructions carefully and follow safety precautions on page 2-5 before using
this product.
• Please make sure the date and name of store of purchase are stamped in warranty card and
keep it with these operating instructions.
ARAH1E203580
P0423-0
Printed in Vietnam
HK

Safety Precautions
Please be sure to follow these instructions.
Risk of re / flammable materials.
WARNING
WARNING
This sign means: It may lead to a serious
injury or death.
These signs mean prohibited
action.
This sign means required action.
This sign means the appliance must
be earthed to prevent electric shock.
CAUTION
This sign means: It may result in injury or
property damage.
Otherwise, it may
causeare,injury,
electrical shock.
When recycling the product:
●Before taking the refrigerator to be recycled, please remove all the
door opening seal to prevent locking a child in it.
●The warning labels mentioned above should be kept throughout the life
of the refrigerator.
●The operating instructions should be handed over to any person who
would use or handle the refrigerator whenever the refrigerator would be
transferred to another location and delivered to a recycling plant.
●Regarding to local laws, Cyclo-Pentane is used for insulation of this
refrigerator. When you throw away this unit, please discard it by proper
method and do not dispose it by burning.
In case of emergency:
●Maintenance work only be carried out at service center by well-trained
maintenance worker.
●Do not store explosive substances, such as aerosol cans with a
flammable propellant, etc. in the refrigerator.
●Do not use electrical appliances such as a deodorizer in the
refrigerator. Leaked refrigerant may catch re from a spark of the
electrical contacts and may cause an explosion.
●Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
●Do not disassemble, repair or modify the refrigerator by yourself.
If you want to repair the refrigerator, please consult your dealer or
authorized service center.
●Do not use mechanical device or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
iso-butane
iso-butane
2

When using:
●Do not damage the cooling circuit (piping on the back).
●Do not touch the compressor and pipes, because of high temperature,
that there is a risk of burn injury.
●Do not let any children hang onto the refrigerator's door, it may
overturn to the kid.
●Do not place any water container on the top of the refrigerator in case
the spilling water causes electrical shock or combustion.
●Do not locate multiple portable socket-outlets or portable supplies at
the rear of the appliance.
●Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
●This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
●Children should be supervised to ensure that they do not play with the
refrigerator.
When installing:
●Fix the refrigerator to avoid
danger due to unbalance.
●When positioning the appliance,
ensure the supply cord is not
trapped or damaged.
●Ensure that the refrigerator
is plugged into an earthed
mains socket.
WARNING
Otherwise, it may
causeare,injury,
electrical shock.
For power plug and cord:
●Do not plug or unplug with wet hands.
●Do not let the cord or plug be damaged.
●Disconnect power plug when cleaning.
●Plug into a wall outlet of the rated voltage on its own with the rated
current and insert plug fully.
●Reserve one socket for the refrigerator only. Avoid connecting many
appliances to the same socket and unroll through the length of cord.
●Remove dust periodically from the power plug.
●If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualied persons in order to avoid a hazard.
●If you detect burning smell, disconnect the power plug and ventilate the kitchen.
●Stop using the refrigerator and unplug the unit immediately if there is an
abnormality or failure. Abnormality and failure examples:
- Power cord or plug is abnormally hot.
- Power cord is deeply cut or deformed.
- There is burning smell.
- You can feel tingling electricity.
3

Usage Precautions
When opening/closing the doors:
When moving the refrigerator:
When storing food:
CAUTION
●While opening the refrigerator, be careful not
to pinch other one's hand holding the door.
●Mind the gap between the doors. They may
nip your hand while closing the door.
●Do not freeze glass bottles, that there is a risk of injury.
(If the liquid in a glass bottle is frozen, then the bottle
may break and you may be injured.)
●Do not add a high impact on glass trays. (Otherwise
those glass trays may break and you may be injured.)
●Hold the refrigerator tightly when transporting.
● Apply protective covering, etc. to floors with a fragile surface.
When opening/closing the doors:
●Do not refrigerate items which are bigger than tray or shelf, as the door will
not close completely causing leakage of cool air.
●Do not open refrigerator frequently or leave it open for long time in order to
prevent water dripping inside and waste energy.
●Frequently check the door opening seal, it must be closed to the refrigerator's
body completely.
When cleaning:
●Do not clean the refrigerator with chemical substance or
liquid. It will cause damage and have corrosion on the
surface.
●Clean the pan water evap located over the compressor at
the back of the refrigerator every three months to prevent
the odour generated from humidity.
Otherwise it may cause
injury,accidents.
4

Usage Precautions
When storing food:
●Do not place warm/hot foodstu󰀨 in the refrigerator.
●Cool hot dishes in room temperature before placing them in your
refrigerator.
●Do not overload the refrigerator. Gap must be provided between
foodstu󰀨s to maintain the cooling e󰀨ect.
●Store fruits and vegetables in vegetable case, where trapped
moisture helps preserve food quality for longer time periods.
●Drinking water, beverage bottles should be sealed to prevent
odor contamination.
● Food stu󰀨 such as vegetables, fruits and fresh food should be
wrapped or packed in box before freezing and refrigerating.
● Put the food such as meat or sh in the freezer if you want to store for an
extended period.
● Cover juicy food with tight lids, plastic lm or foil.
When using:
●When the plug is disconnected, leave it for 5 minutes before
plugging again. If not, the compressor may not work.
●Adjust the temperature according to the actual operating
condition for energy saving.
●The humidity inside the fresh case may condense so wipe it
with a cloth periodically. Clean the fresh case once a month.
●If you will not be at home for several days and there are nothing refrigerated
in the refrigerator, the plug should be disconnected for energy saving. When
the refrigerator is not used for several days, it is necessary to take out all
remaining food inside the refrigerator, clean and open the doors for a few
hours to let the moisture inside the refrigerator dry out, avoiding mold and
oxidation of components.
●The outside wall of refrigerator cabinet may sometimes get warm, especially
just after installation. This is quite normal, and is due to the built-in Mullion
Dryer Pipe which prevents sweating and radiates heat.
●When humidity is high, e.g. during rainy-season, condensation may appear
on the surface of cabinet, especially around the door seal gasket. Wipe o󰀨 the
condensed water with a clean cloth.
●Do not keep the door open any longer than necessary, particularly in hot,
humid weather.
● The top of the refrigerator is made of steel in order to prevent re caused by
external influences. Do not put things on top of the refrigerator to ensure this
factor.
5 mins
5

● When using for the rst time: clean the inside of the refrigerator.
• Use a soft damp cloth to clean the refrigerator.
• Rinse the Ice trays.
• The smell of plastic could be smelled in the rst time using the refrigerator. If you are
worry about it, please ventilate the room.
●Do not locate the refrigerator in a humid place as rust may form and may cause electric
leakage.
●Do not locate the refrigerator exposing to direct sunlight as the heat and sunlight will
increase the temperature a󰀨ecting the cooling capacity.
●Do not locate the refrigerator near heat source such as cooking stove or oven.
●Do not block the openings around the refrigerator.
●The refrigerator must be located in the place where there is good air circulation.
●In case of placing the refrigerator on an uneven surface, adjust the adjustable leg to
make the refrigerator stands stably.
Installation
●The top of the refrigerator is at
least 5 cm from the ceiling.
●The left and
right sides of the
refrigerator are at
least 5 cm from
the walls.
●The back of the refrigerator is at least
5 cm from the wall.
5 cm
5 cm
The distance requested for installation
6

Prevent tipping
In order to prevent the
refrigerator from tipping
due to earthquakes,
permanently x it by using
belts, etc.
Fix the refrigerator.
Turn the adjuster
bolts (right and left)
until they reach the
floor to stabilize the
refrigerator.
Refrigerator doors should not be opened during the interior cooling process.
The doors should not be opened until the interior has been cooled down su󰀩ciently.
(Warm air flowing into the interior will block the cooling function.)
Please wait until the interior has cooled down.
●The refrigerator may take at least 4 hours of continuous running to cool down the
interior, in the condition of no load inside and the doors are not opened.
●Depending on ambient temperature and usage condition, it may take 24 hours to cool
down the interior and achieve equilibrium.
LED lamp and grounding
●The refrigerator LED lamp, specially designed for this refrigerator, do not replace it by
yourself. If you need replacement, please contact Panasonic Service Center.
●If the refrigerator plug has no ground wire, it should be connected with a grounding
connection to prevent electrical hazard from electric leakage.
Moving or shifting
1Remove ice in the Ice trays and Ice box.
2Unplug the refrigerator.
3Adjust the adjuster bolts (left and right) so that they do touch
the floor.
4Place a container underneath the drainage hole, then slowly tilt
the refrigerator backward to drain water from the drainage hole.
This action requires 4 or more people, of which 2 people lift the
front of the refrigerator to prevent the refrigerator from sliding
and avoid the risk of accidents.
※ How to move and transport
●At least 4 people are required to transport the refrigerator.
●Each person lifts a corner of the refrigerator.
●Do not transport by holding the refrigerator doors.
Caution
●When transporting, use straps to secure the refrigerator doors
and avoid letting the doors open by itself.
●Do not place the refrigerator on its side when transporting, as this may cause damage
to the refrigerator.
●After installation, wait at least 4 hours before plugging in the power to ensure that the
gas and oil in the compressor are in a stable state.
Drainage hole
7

A-Fridge compartment
1LED Lamp
2Glass tray of Fridge compartment
(Quantity: 2 pcs)
3Operation Panel (Page 9)
4Glass tray Vegetable case
5Vegetable case
6Egg tray
7Door shelf (Quantity: 2 pcs)
8Bottle shelf
9Door gasket of Fridge compartment
0Prime Fresh case
(Blue Ag LED)
①
⑨
⑩
⑪
⑭
⑮
⑯
⑰
②
③
④
⑤⑧
⑥
⑦
⑫
⑬
Product view from behind
Pan water evap
PartsIdentication
B-Freezer compartment
aIce maker
bIce box
cGlass tray of Freezer compartment
dGlass tray Freezer case
eFreezer case
fDoor gasket of Freezer compartment
gAdjuster bolts
8

1LED of compartments: the icon of the respective compartment will light up when the
compartment is selected.
2Temperature display area: display the temperature of Fridge compartment, Freezer
compartment, Prime Fresh case.
3Temperature control button of Fridge compartment.
4Temperature control button of Freezer compartment.
5Temperature control button of Prime Fresh case, control button and LED of Prime Fresh+.
6Control button of Quick Freezing.
7LED of Quick Freezing.
Remark
●On the Operation Panel: “*Extra function: Press 3 sec”, means that you need to press and
hold the button beginning with “*” mark for 3 seconds when you want to start the extra
functions.
●Under normal conditions, the Operation Panel will display latest setting status. When you
press a button, the refrigerator will generate a sound and begins to allow setting changes.
●In summer, when the temperature is high, if you put uncooled food in the refrigerator or
open/close the refrigerator doors repeatedly, the temperature inside will increase and the
displayed value will be higher than the setting temperature. Therefore, it is necessary to
reduce doors opening times.
● When rst plugged in, the Operation Panel will display the introduction of modes and the
temperature of compartments for about 8 seconds. Buttons will not be active during this
period of time. After 8 seconds, the Operation Panel can be adjusted normally.
Operation Panel
9

●Default setting temperature for Fridge compartment is 4 °C, Prime Fresh case is -3 °C and
Freezer compartment is -20 °C. The temperature setting for each compartment can be adjusted.
●The temperature setting range of the Fridge compartment is 1 °C ~ 7 °C, of the Prime
Fresh case is -5 °C ~ 4 °C (the temperature for soft freezing is -5 °C ~ -1 °C, and the
temperature to use the Prime Fresh case as the Fridge compartment is 0 °C ~ 4 °C), of the
Freezer compartment is -23 °C ~ -15 °C.
●The temperature inside the refrigerator will vary depending on the ambient temperature,
installation status, usage conditions and amount of food.
● Due to di󰀨erent testing methods and tools, the actual temperature may di󰀨er from the
displayed temperature.
●This refrigerator is equipped with a processor to control the temperature inside the
refrigerator. When the ambient temperature changes, the compressor runs or stops, the
doors are opened or closed, the temperature inside the refrigerator and the temperature
setting will have a slight di󰀨erence.
Temperature setting instructions
1. Display the current temperature
Press the following icons to display the current temperature of these compartments: Fridge
compartment, Prime Fresh case, and Freezer compartment. The LED indicates position and
the LED indicates temperature of the compartment will light on when selected.
Icon Compartment
LED indicates
position of the
compartment
LED indicates
temperature of the
compartment
Fridge
compartment
Prime Fresh
case
Freezer
compartment
2. Temperature setting
After pressing the icon of compartment (Fridge, Prime Fresh, Freezer) to display the current
temperature, press again to start the temperature setting process. Then, LED indicates
position of the compartment and LED indicates temperature of the compartment will flash.
Continue to press the icon of that compartment to select the desired temperature level. Each
time the button is pressed, the temperature will increase by 1 °C within temperature setting
range of the compartment. If the selection exceeds the compartment temperature range, the
Operation Panel will display the temperature return to the lowest level in the above range.
3. Complete temperature setting
After completing the temperature setting, press another button to nish and save the setting
that you have just made. Or if no other button is pressed within 10 seconds, the Operation
Panel will save the setting and return to stand by mode.
Temperature Control
10

ECONAVI Operation
The refrigerator detects the opening and closing of the refrigerator door to control operations
automatically to ensure maximum energy saving.*
ECONAVI operation
●The refrigerator learns the lifestyle patterns of your family from door opening and time
periods of infrequent use to maximize energy e󰀩ciency.
●The refrigerator learns your lifestyle patterns from the previous 3 weeks of use and uses
that data from the 4th week onwards.
Settings for enabling ECONAVI operation
●ECONAVI operation is enabled automatically when the temperature control for both the
Fridge compartment and the Freezer compartment is set to 4 °C and -20 °C, respectively.
●ECONAVI operation does not operate if the “Quick Freezing” or “Prime Fresh+” mode is
in operation.
●It is not possible to force to start of the ECONAVI mode.
Remark
* The e󰀨ectiveness of the ECONAVI mode is dependant on the ambient temperature, the
number of times the refrigerator door is opened and closed and the state in which food is
stored.
Quick Freezing
When “Quick Freezing” is set, the refrigerator will reduce the temperature quickly for better
performance of preserving food and speed up the ice making.
How to operate the “Quick Freezing” mode
● Press the “Quick Freezing” icon twice to start “ Quick Freezing ” .
Then, the LED [Quick Freezing] will turns on.
●If you want to stop the “Quick Freezing” operation immediately,
press the “Quick Freezing” icon twice until the LED turns o󰀨.
Remark
●The “Quick Freezing” operation will stop automatically after running for 150 minutes and
return to normal mode. (The LED [Quick Freezing] turns o󰀨.)
●The flashing of LED [Quick Freezing] means that the defrosting system is currently working.
The “Quick Freezing” mode will start right after the defrosting operation is nished.
●The temperature of the Freezer compartment will return to its previous setting when the
“Quick Freezing” mode ends.
●The “Prime Fresh+” mode will be stopped when “Quick Freezing” is turned on.
Light is on: Quick Freezing
is operated.
Light is o󰀨: Quick Freezing
is not operated.
11

Prime Fresh+
When “Prime Fresh+” is set, the Prime Fresh case will reduce the temperature quickly for
better performance of preserving food.
How to operate the “Prime Fresh+” mode
Light is on: Prime Fresh+ is
operated.
Light is o󰀨: Prime Fresh+ is
not operated.
●Press and hold the “Prime Fresh” icon for 3 seconds to
start the “Prime Fresh+” mode. Then, the LED above the
“Prime Fresh+” icon will turn on.
●If you want to stop the “Prime Fresh+” operation
immediately, press and hold the “Prime Fresh” icon for
3 seconds. Then, the LED above the “Prime Fresh+” will
turn o󰀨.
●“Prime Fresh+” will stop automatically after running for 105 minutes (when the ambient
temperature is 18 °C or less) or between 145 ~ 150 minutes (when the ambient temperature
is higher than 18 °C) and return to normal mode. (The LED [Prime Fresh+] turns o󰀨.)
●The flashing of LED [Prime Fresh+] means that the defrosting system is currently working.
“Prime Fresh+” will start right after the defrosting operation is nished.
●The temperature of the Prime Fresh case will return to its previous setting when “Prime
Fresh+” ends.
●The “Quick Freezing” mode will be stopped when “Prime Fresh+” is turned on.
●“Prime Fresh+” will not start when the temperature of the Prime Fresh case is being set
between 0 °C ~ 4 °C. If you press and hold the “Prime Fresh” icon while the temperature of
the Prime Fresh compartment is being set between 0 °C ~ 4 °C, the refrigerator will generate
warning sound.
●While the “Prime Fresh+” mode is turned on, if the temperature of the Prime Fresh case
is being set between 0 °C ~ 4 °C, the “Prime Fresh+” mode will be stopped and the LED
[Prime Fresh+] turns o󰀨.
Remark
12

Fridge compartment
The position of the glass tray of Fridge compartment can be changed
1 Lift up the back of the glass tray and pull it
forward. Once the protrusions of the glass tray are
unhooked from rails, tilt the tray and remove it.
2Insert the glass tray in the desired position by
reversing the steps.
●Glass trays are heavy.
Please handle them with care so that they do
not fall and cause any damage or injury.
Protrusion
Rail
The temperature range of the Fridge compartment is 1 °C ~ 7 °C.
If the temperature of the Fridge compartment is set to 1 °C during a long period of time, your
food may be frozen.
Tips for food preservation
Do not over stock too many food items
When there are too many food items and there is
no space for cool air circulation inside the
refrigerator, the cooling capacity will be a󰀨ected.
Provide su󰀩cient space between foods inside
the Fridge compartment!
Do not block the cool air outlet with food items
If the cool air does not spread into every corner of compartments, then
the interior will not be su󰀩ciently cooled and more electricity will be
consumed. Therefore, do not place food items in front of the cooling air
vents* and block the air circulation in the refrigerator.
*The cooling air vents are located on the duct inside the Fridge
compartment.
No wasting cool air
inside the refrigerator is
the key to keeping food
fresher for longer!
13

Prime Fresh case
The temperature in the Prime Fresh case can be selected as below:
• The temperature for soft freeze is -5 °C ~ -1 °C .
• The temperature to use the Prime Fresh case as the Fridge compartment is 0 °C ~ 4 °C.
When using the refrigerator, the temperature can be adjusted according to your usage.
*The default temperature setting of Prime Fresh case is -3 °C.
Using Prime Fresh case Approx. -5 °C ~ -1 °C
● This case is suitable for storing fresh food, such as meat or sh. Compared to storing in the
Fridge compartment, the storage life of meat or sh becomes longer.
●When food is frozen too much.
Sliced raw sh or meat may be frozen too
much. Set the temperature to higher than
-3 °C to prevent food from over frozen.
●When food is not entire surface-frozen.
Depending on the type of food, such as a
large block of meat or a large sh, the storage
conditions and the ambient temperature, food may not be entire surface-frozen as it
intended. Then, set to the lowest temperature -5 °C.
●Do not over stock with too many food items. When there are too many food items and
there is no space for cool air circulation inside the refrigerator, the cooling capacity will be
a󰀨ected. Provide su󰀩cient space between foods inside Prime Fresh case.
● When storing food in large amount, e.g. a large block of meat, a large sh or a chicken, it
is advisable to place the food at the center of the Prime Fresh case to optimize the cooling
performance.
●When the temperature of the Prime Fresh case is set at 0 °C ~ 4 °C, the Prime Fresh+
mode will not operate in order to prevent food spoilage.
●Do not block the cool air outlet with food items inside the Prime Fresh case.
If the cool air does not spread into every corner of Prime Fresh case, then the interior will
not be su󰀩ciently cooled and the food may be a󰀨ected. Therefore, food should not be
placed in front of the Cooling air guide (on the Prime Fresh case) to prevent blocking the
air circulation inside the case.
Easy to cut.
The partially -
frozen foods is
easy to cut!
It comes in handy
Cooling air guide
Prime Fresh case
14

Freezer compartment
Storing frozen foods for a long period of time
The temperature range of the Freezer compartment is -23 °C to -15 °C.
Frozen food
Frozen food
Frozen food
Three tips for freezing food and locking in the flavour
1. Freeze thin and small items of food quickly
2. Fully sealed
3. Do not refreeze
Freezer case
Maximum storage
If the stored food exceeds edge of container,
the freezer door can not close completely and
the case may become frosted.
Food storage in the Freezer room
How to make ice cubes with ice maker
1. Fill water in the Ice tray till the Water Level Line.
2. Put the Ice tray inside Freezer room, wait until ice is made.
3. Take ice cubes out of the Ice tray to use.
Remark
z Do not cover the Ice tray to speed up the ice making time.
z If you want to use a lot of ice, store ice in the Ice box below
the tray.
WATER LEVEL
WATER LEVEL LINE
15

To use the Ice maker in comfort
Please use only drinking
water for Ice making.
Do not put liquids such as the following into Ice
maker.
(These liquids may damage the Ice maker).
Juice, etc. Sports drinks Carbonated beverages Hot water
The hardness
of water must be
100 mg/L or less.
Drinking water
Tips
●The hardness of water must be 100 mg/L or less. The minerals may appear as white floating
particles. They are not harmful.
Request
●Do not pour water directly into the Ice box to make ice.
(Otherwise, the Ice box may be broken).
●Do not put food or other things into the Ice box.
● When using for the rst time or when not being used after a long time, the Ice tray and Ice
box may smell unpleasantly or collect dust. Remember to clean the Ice tray and Ice box
before proceeding to make ice.
Ice maker cycle time will be longer in the following cases.
● The rst time using the refrigerator.
(It will take at least 24 hours since the
Ice making function only starts after the
inside of the refrigerator is cool enough).
●When the refrigerator doors is frequently
opened.
●When the refrigerator doors is ajar.
●When a large amount of food is stored
at once.
●When the ambient temperature is low
during winter or high during summer.
●When a power failure occurs.
16

How to clean the Refrigerator
Before cleaning or conducting maintenance, be absolutely sure to disconnect the power plug
from the power outlet. Do not connect or disconnect the power plug with wet hands.
When the plug is disconnected, leave it for 5 minutes before plugging again. If not, the
compressor may not work.
Clean the refrigerator immediately after it is stained!
Wipe o󰀨 stains on the interior
surfaces quickly before they
harden. In particular, cooking
oil or lard may cause plastic
to crack and citrus juice may
cause the refrigerator to become
discolored. When stains
cannot be removed easily,
wipe them with a cloth lightly
soaked in neutral kitchen
detergent. Then, wipe with a cloth
lightly dipped in water.
Clean the detachable items
occasionally.
Clean the ice tray once a week.
As a guide, remove the trays,
door shelves, etc. and wash them
by immersing them in lukewarm
water every three months.
Clean the door gasket at least once a month.
Clean by wiping with a soft damp cloth.
Lubricated gel has been applied to the
door gasket on the hinge side of the refrigerator
be careful not to wipe it o󰀨.
Notice
The door gasket is replaceable by an authorised service agent.
If the door gasket comes o󰀨 while cleaning, it can be pushed back into the groove.
Request
Do not use the following items for cleaning.
(Otherwise, the surface will be scratched or corroded.)
Alkaline or weak
Alkaline
Kitchen detergents
(They crack plastic!)
Cleanser or soap powder Benzine, thinner,
alcohol, acid, petroleum
Scrubber Hot Water
Use lukewarm
water!
Rub the door surface
with a soft damp cloth
Remove and
rinse!
Point where
lubricated gel
was applied
17

How to clean the Refrigerator
Once every 3 months
Door shelf / Bottle shelf
Removing
1 Lift it upward, alternating between the right and left side.
Attaching
2 Place it on both supporters, and then press until it
reaches the end of supporters.
Once every 3 months
Tray
Removing
1 Lift up the back of the tray and pull it
forward. Once the protrusions of the
tray are unhooked from the rails, tilt
the tray and remove it.
Attaching
2 Push the tray until it reaches the end
lock.
Remark
●For easier to take the glass trays out from the refrigerator, please remove door shelves and
bottle shelves rst.
●In case of attaching the tray and it does not lock, make sure that you did not attach it into it
the wrong tray.
●Trays are made of glass and heavy.
Please handle them with care so that they do not fall and cause any damage or injury.
For attaching trays, hold them with the protrusion side down and rmly insert.
18

Once every 3 months
Vegetable case / Freezer case
Removing
1Pull the case forward until it reaches the
end.
2Gently lift the front of the case to remove
it completely.
Attaching
1Insert the case into the shelf.
2Gently lift the case and push forward
until it reaches the end.
Once every 3 months
Prime Fresh case
Removing
1Fully open the door of the Fridge
compartment.
2Pull the case forward until it reaches
the end and gently lift the front of the
case to remove it completely.
Attaching
1Insert the case into the shelf.
2Gently lift the case and push forward
until it reaches the end.
19

Troubleshooting
Before you call for service, please check the following steps:
The refrigerator
does not operate.
●Check that the plug and its socket are in good condition.
●Check if there is any problem on main fuse and electrical
system of the house.
●Check by unplug and wait for 5 minutes before plugging it back
in.
The refrigerator
does not cool
enough.
●Check to be sure that light in Operation Panel is displayed at
proper position.
●Check to see if the refrigerator is overloaded with stu󰀨 or there
is any hot foodstu󰀨 refrigerated inside.
●Is the refrigerator exposed directly to sunlight or heat source?
●Is the refrigerator door completely closed?
●Is the refrigerator door opened frequently?
●When the air humidity is high, there is a chance that moisture
will condense on the refrigerator surface, around the door
gasket or on the door surface. This situation will stop if the air
humidity decreases. Please wipe it up with dry cloth.
●Is the door closed rmly?
●Is the door being opened and closed too frequently?
●Condensation inside the refrigerator can also be
caused by leaving high-humidity foods uncovered or
unwrapped.
●When the humidity is high, the door is open for
a long time, when the refrigerator contains too much food, food
items block the cool air outlet or makes too much ice, frost may
form inside the Freezer compartment. This is normal. Please
wipe with dry and soft cloth.
The refrigerator
generates noise.
●Check if the refrigerator is located on a stable floor or is
installed properly.
●Check if there is any object in contact with the refrigerator.
●Cracking sound within caused by the parts adjusting
temperature which is normal.
●After installation, the refrigerator may make loud noise.
The noise will be less when the refrigerator has been cooled.
Outside
Inside
Dew, frost appears.
The inside is
smelling. ●Do you store food with dry odor without wrapping it?
20