Panasonic SC-HT19GS-K User manual

Thank you for purchasing this Panasonic product.
Please read these instructions carefully before operating this product
and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
2.1 Channel Speaker System
SC-HT19GS-K

Satellite Speaker: 120 Hz - 20 KHz
220-240V~50/60Hz
20 W + 12.5 W x 2 (RMS)
Subwoofer ( L B H ) 245 x 212 x 187 (mm)x x :
93 x 103 x 118 (mm) Satellite ( L x B x H ) :
Features:
Quality 2.1 speaker system with built-in amplifier
Full audio spectrum performances, ideal for your favourite entertainment
from Mp3 and digital playbacks
Specially designed woofer cabinet for bass
With remote control and RCA stereo connection
Package contents:
....................................
Satellite speakers 2 pc
............................................
User manual 1 pc
...................................
Subwoofer cabinet 1 pc
.......................................1 pc
Audio input cord
........................................1 pc
Remote control
........................................
Hanging screw 2 pc
......................................
Screw Supporter 2 pc
Sound output:
Specifications
60
1
3" x 2 satellite + 5" subwoofer

USB BT
AUX
/
FM NORMAL POP
ROCK
JAZZ
Part No.: L89-0010U-028
/
How to use the remote control
(1)
(7)
(11)
(14)
(12)
(13)
(15)
(3)
(9)
(2)
(4)
(8)
(6)
(10)
(5)
1. ST-BY (Stand-by): Turns ON the unit; When is ST-BY mode, the LED indicator
will blink as last selected function, i.e. Red for AUX, Purple for FM and Blue for
USB & Bluetooth.
2. MUTE: Turn OFF volume. Press again to activate volume.
3. AUX: AUX mode selection. Red LED will be ON when in AUX mode.
4. POP: A kind of EQ mode, only applicable for USB/BT mode.
5. FM: FM mode selection. When you enter FM mode, the purple LED will be ON.
Long press “ ” to search and store FM stations/channels automatically.
6. NORMAL: A kind of EQ mode, only applicable for USB/BT mode.
2

3
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same of equivalent type.
7. BT: BT mode selection. When you enter BT mode, Blue LED display start flashing
quickly to search the BT device. Turn on your mobile device and search the BT
device name as “SC-HT19”. When you have successfully paired your mobile to
the speaker system, the LED flashes slowly. Once you started playing music, the
LED will stop flashing. The functions as "PREVIOUS/NEXT", " ", can operate
via the front panel. At BT mode, when connecting with Mobile, press “ ” for 3
seconds, BT can be forcefully disconnected.
8. JAZZ: A kind of EQ mode, only applicable for USB/BT mode.
9. USB: For USB mode selection. When enter into USB mode, blue LED will be
on. “ ” means next song; “ ” means previous song; “ ” means play/pause.
10. ROCK: A kind of EQ mode, only applicable for USB/BT mode.
11. VOL+: Increase the volume by continuous or long press of VOL+.
12. VOL-: Decrease the volume by continuous or long press of VOL-.
13. PLAY/PAUSE: Play/Pause the song in USB/BT mode and mute in FM/AUX mode.
14. PREVIOUS: For selection previous song in USB/BT mode and previous stored FM
station in FM mode.
15. NEXT: For selection next song in USB/BT mode and next stored FM station in
FM mode.
Notes:
When USB is plugged in, to turn ON the set, you may need to press “ ” more
than one time. For best performance in BT mode, please place your connected device
within 9 Meters of operating range and in open area.
/
/
/

4
Instructions for replacing lithium battery
STEP1 ：Turn the remote control to the back side
STEP2： Pull out the plastic sheet
STEP3： Pull out the battery box
STEP4： Take out the lithium battery out of the battery box
STEP5： Replace the lithium battery
STEP6： Put the battery box inside the remote control
STEP7： Put the plastic sheet inside the remote control
USB BT
AUX
/
FM NORMAL POP
ROCK
JAZZ

(2)
(1)
(3)
(4)
(5) (6)
(7)
Front Panel Key Operation:
1.
2.
3.
4.
5. VOL-
6. VOL+
7.
USB socket
USB INPUT
BT INPUT AUX INPUT FM TUNNER
short press
short press
long time press
track selection
previous/next
play/pause
BT
function will be
force-
disconnected
/SCAN
mute play/pause
track selection
previous/next
mute
previous/next
channel selection
automatic search
fm radio
station/channel stored
automatically
1. /Source button for input
mode selection. Long pressing /Source button will put the
unit in “Stand-by” mode.
/Source: After power on, press
2. You can change the input modes by pressing /Source
button. Color of LED in AUX mode is Red, Blue in USB/BT
and Purple in FM mode.
5

AC IN
INPU T
L
R
OUTP UT
L
R
1. Input:
Connect to sound sources
such as Computer, CD
Player, Mp3 , etc.Player
3. AC IN:
AC Power cord
2. Output:
Connect the satellite
speakers.
4. Power ON/OFF:
Switch for turning on/off
the power.
(3)
(4)
(2)
(1)
6

R L
1. Connect both satellite speakers to OUTPUT terminals of back panel.
2. Connect the power cord to the mains and power on the system.
3. To play at AUX Mode, connect the 3.5 mm stereo input jack into the output
the audio sources such as , Computer, etc. of Mp3 Player Connect other end
RCA cable to “INPUT” terminal.
4. For playing USB, connect USB device to the socket shown on page No.4.
5. For listening to FM, please select FM mode using source key of front panel
button on remote.or FM
6. For BT, pls select BT mode using source key of front panel or BT button on
remote and connect with the name SC-HT19.
System Connection Diagram
7
* Do not leave objects generating magnetism near the speakers.
* Audio system may deliver low audio output for some mobile and other
devices when connected via BT.
AC IN
INP UT
L
R
OUT PUT
L
R

Subwoofer
How to place Speaker System
8

*If the remote control cannot function, it is because the battery of
remote control has been used up. Thank you.
CAUTION/WARNING
Apparatus shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the
apparatus. Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire or the like.
Maximum working temperature: 45 ℃
The MAINS plug is used as the disconnect device, the disconnect
device shall remain readily operable.
SAFETY INSTRUCTIONS
9
Warning : User replaceable coin / button cell battery