Panasonic CZ-RD52CU User manual

Accessories
Job Name:
Location:
Engineer:
Submitted to:
Submitted by:
Reference:
Approval:
Date:
Construction:
Unit#:
Drawing#:
CZ-RD52CU
Wired Thermostat for CS-E12,18RB4UW ONLY
Applications
Hotel Rooms
Assisted Living
Offices
Dorm Rooms
2
Remote Control Preparation
• Press and hold for approximately 5
seconds to show 12-hour (am/pm) or 24-hour
time indication.
1. Press
2. Press or to select current day.
3. Press to confirm.
4. Repeat steps 2 and 3 to set the current time.
Wired remote control
Remote Control Display
aOPERATION LED
bOFF INDICATOR
cOPERATION MODE SELECTION
INDICATOR
dTIMER/CLOCK SETTING DISPLAY
Lights up if Timer operation is selected
6 different
programmes can be
set in a day (1 ~ 6)
Time to be selected
(10 minutes step)
ON Timer. To automatically switch “ON”
the unit.
OFF Timer. To automatically
switch “OFF” the unit.
Day to be selected
Indicates the selected
day
Indicates the next
timer operation day
eFAN SPEED DISPLAY
fTEMPERATURE SETTING DISPLAY
gERROR CODE DISPLAY
hFILTER CHECK INDICATOR
iAIRFLOW DIRECTION SETTING DISPLAY
d
g
f
e
3
1
4
2
6 57 910 8
h
a
b
c
i
11
2
Remote Control Preparation
• Press and hold for approximately 5
seconds to show 12-hour (am/pm) or 24-hour
time indication.
1. Press
2. Press or to select current day.
3. Press to confirm.
4. Repeat steps 2 and 3 to set the current time.
Wired remote control
Remote Control Display
aOPERATION LED
bOFF INDICATOR
cOPERATION MODE SELECTION
INDICATOR
dTIMER/CLOCK SETTING DISPLAY
Lights up if Timer operation is selected
6 different
programmes can be
set in a day (1 ~ 6)
Time to be selected
(10 minutes step)
ON Timer. To automatically switch “ON”
the unit.
OFF Timer. To automatically
switch “OFF” the unit.
Day to be selected
Indicates the selected
day
Indicates the next
timer operation day
eFAN SPEED DISPLAY
fTEMPERATURE SETTING DISPLAY
gERROR CODE DISPLAY
hFILTER CHECK INDICATOR
iAIRFLOW DIRECTION SETTING DISPLAY
d
g
f
e
3
1
4
2
6 57 910 8
h
a
b
c
i
11
2
Remote Control Preparation
• Press and hold for approximately 5
seconds to show 12-hour (am/pm) or 24-hour
time indication.
1. Press
2. Press or to select current day.
3. Press to confirm.
4. Repeat steps 2 and 3 to set the current time.
Wired remote control
Remote Control Display
aOPERATION LED
bOFF INDICATOR
cOPERATION MODE SELECTION
INDICATOR
dTIMER/CLOCK SETTING DISPLAY
Lights up if Timer operation is selected
6 different
programmes can be
set in a day (1 ~ 6)
Time to be selected
(10 minutes step)
ON Timer. To automatically switch “ON”
the unit.
OFF Timer. To automatically
switch “OFF” the unit.
Day to be selected
Indicates the selected
day
Indicates the next
timer operation day
eFAN SPEED DISPLAY
fTEMPERATURE SETTING DISPLAY
gERROR CODE DISPLAY
hFILTER CHECK INDICATOR
iAIRFLOW DIRECTION SETTING DISPLAY
d
g
f
e
3
1
4
2
6 57 910 8
h
a
b
c
i
11

Panasonic North America
Air Conditioning Division
1690 Roberts Blvd., NW, Suite 110
Kennesaw, GA 30144
http://www.panasonic.com/aircon
English
3
Press the remote control’s button
1TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the
remote control display to prevent the unit from
starting/stopping improperly.
2TO SET TEMPERATURE
• Selection range: 60°F ~ 86°F.
3TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects operation mode during startup
according to temperature setting and room
temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power
indicator blinks during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor
heat to reduce power consumption during cool
mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
4TO SELECT FAN SPEED
(Remote control display)
FAN SPEED
• For AUTO, the indoor fan speed is
automatically adjusted according to the
operation mode.
5TO ADJUST VERTICAL AIRFLOW
DIRECTION
(Remote control display)
AIR SWING
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver
swing up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal
louver fixed at predetermined position.
• For Hide-Away models, AIR SWING buttons
are not in use. Airflow direction can not be
adjusted.
6
Press and hold for approximately 10
seconds to show temperature setting in °C
or °F.
7Press and hold for 5 seconds to dim or
restore the unit’s indicator brightness.
8Press to restore the remote control’s
default setting.
9RETRIEVE ERROR CODE
• During operation, the unit stops and both a
and bis OFF indicates abnormality occurs.
1.Ensure ais OFF, press for 5 seconds.
2.Press or . If error code and abnormality
can be identified, awill be ON continuously,
then write down the error code.
3.Press for 5 seconds to quit checking.
4.Turn the unit off and reveal the error code to
authorized dealer.
Note: Press for 10 seconds to enter AC reset
switch (Not used in normal operation).
10 AIR FILTER MAINTENANCE
Cleaning is needed when “FILTER CHECK”
indicator is ON.
• lt is recommended to clean the air filter every 6
weeks.
• After the air filter is cleaned, press to
reset.
• Do not operate without an air filter.
• Wash/rinse the filters gently with water to avoid
damage to the filter surface.
• Do not dry the part with a hair dryer or a stove.
• Replace any damaged filters.
11 TO SWITCH BETWEEN POWERFUL &
QUIET
POWERFUL/
QUIET
QUIETPOWERFUL NORMAL
POWERFUL: To reach temperature quickly
• This operation stops automatically after 20
minutes.
QUIET: To enjoy quiet operation
• This operation reduces airflow noise.
Data is Subject to Change.