Panasonic MC-CG522 User manual

Vacuum Cleaner
(Domestic use)
Operating Instructions
IMPORTANT SAFETY INSTRUCTIONS FOR THE USER . . . . . . . . .2
IDENTIFICATION OF MAIN PARTS . . . . . . . . . . . . . . . . . . . . . . . . . .2
USING THE APPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Vacuum Cleaner Consumables / Accessories. . . . . . . . . . . . . . . . . . .4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Model No. MC-CG524
MC-CG522
Thank you for purchasing the vacuum cleaner.
Please read these instructions carefully before using the appliance
and save these instructions for future reference.
Contents

2
IMPORTANT SAFETY INSTRUCTIONS FOR THE USER
Before using the vacuum cleaner, please observe these basic safety instructions.
Correct usage
This appliance is for indoor use with domestic purpose only and is not
specifically designed for allergy sufferers. Use the appliance only in
accordance with the instructions in this manual. Any other usage or
modification is dangerous. The manufacturer is not liable for damage due to
improper use of the appliance.
WARNING
To reduce the risk of fire, electric shock, or injury
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
Do not use the appliance if the mains lead or plug is damaged or faulty.
If the mains lead is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Unplug from the socket outlet when not in use and before cleaning the
appliance or undertaking maintenance operations.
Turn off the appliance before removing the plug. Do not pull on the mains
lead, always pull on the plug body itself.
Hold the plug, when rewinding the mains lead.
Do not handle plug or the appliance with wet hands.
Do not use the appliance on people or animals.
Do not use filters whilst wet after washing them, make sure they are
completely dry to avoid damaging the appliance.
Do not vacuum the following
Hot ash or embers
Large or sharp objects
Water or other liquids
Explosive materials or gases
Flammable or combustible materials or gases
Toner dust, for example, those from printers and photocopiers
Conductive dusts from power tool
Keep the appliance away from heat sources, for example, radiators, fires,
direct sunlight, etc.
Do not use the appliance in areas where flammable or combustible materials
or gas may be present.
This appliance is fitted with a thermal cut-out device which automatically
turns off the appliance to prevent overheating of the motor. When this
happens, disconnect the appliance from the socket outlet and check the dust
compartment and filters as they may be full or clogged with fine dust. Check
for any other obstructions in the hose or tube. After removing the obstruction,
leave the appliance to cool down until the thermal cut-out resets after
approximately 60 minutes.
Do not use or store the appliance or the parts at head level to avoid the risk
of injury.
Do not sit on the appliance.
Be careful when using the appliance on staircases as the appliance may fall.
Use the appliance where the lighting is sufficient to avoid the risk of tripping.
−
−
−
−
−
−
−
IDENTIFICATION OF MAIN PARTS
USING THE APPLIANCE
Operating the appliance
Assemble the curved wand, telescopic wand and floor nozzle together.
Connect the curved wand and the floor nozzle to the telescopic wand by
inserting and twisting one another. To disconnect them, twist and pull them
off from each other.
Pull out the mains lead and insert the plug into the socket outlet.
Press the OFF/ON switch pedal to turn on the appliance.
Press on the mark not the edge of the OFF/ON switch pedal.
1.
2.
3.
DUSTING BRUSH
CREVICE NOZZLE
Carpet
Parquet/Bare Floor Floor Nozzle
(only for MC-CG524) Telescopic Wand
Suction Regulator
Crevice Nozzle and
Dusting Brush
Hose Unit
Connection Pipe
Dust Indicator
OFF/ON Switch
Pedal
Mains Lead
Power Control
Exhaust Filter
a) HEPA Filter (only for MC-CG524)
b) Electrostatic Filter
(only for MC-CG522)
Cord Rewind Pedal
Use this function when
strong suction causes the
nozzle to stick to the floor,
hindering movement.
To check whether the dust bag is full, turn the
power control to the highest setting and lift the
nozzle off the floor. If the dust indicator turns red,
the dust bag is full.
Telescopic Wand
Curved Wand
Floor Nozzle
OFF/ON
Switch Pedal Power Control
Curved Wand
Floor Nozzle
(only for MC-CG522)
TELESCOPIC WAND
Dust Cover
Accessory
Holder
Pre-Motor Filter (in body)
Dust Bag (in body)
Plug
Parking and storing
Perform the following before storing.
Turn off the appliance, and then remove the plug from the socket outlet.
Press the cord rewind pedal to rewind the mains lead. Hold the plug to
ensure the mains lead does not jump.
Press on the mark not the edge of the cord rewind pedal.
1.
2.
Cord Rewind Pedal
Store the supplied nozzles.
Park position Storage position
3.
Adjust power by rotating the power control.
1. 3. 4.
4.

3
Maintaining the pre-motor filter
Remove the dust bag. (see replacing the dust bag)
Remove pre-motor filter from its slot, wash gently with water and then allow
it to dry in shaded area.
Replace all parts to their original positions.
If the dust bag is not properly installed, the dust cover cannot be closed.
1. 2. 3.
1.
2.
3.
Replacing the dust bag
Replace the dust bag to the new one in the following cases:
– When the dust bag is full. For more details on the dust indicator, see identification of main parts.
– When suction power has dropped.
Open the dust cover, and then pull out the dust bag.
Place a new dust bag, and then close the dust cover.
If the dust bag is not properly installed, the dust cover cannot be closed.
If suction power does not return, check for blockages in hose, telescopic wand, nozzles and pre-motor filter.
1. 2.
1.
2.
Cleaning the outside of the appliance
Clean the outside of the appliance with a soft cloth.
Cleaning the floor nozzle
Use an old tooth brush or similar tool to clean any dirt or lint from the brush.
MC-CG524 MC-CG522
MAINTENANCE
WARNING
Remove the plug from the socket outlet before cleaning or maintaining the
appliance.
CAUTION
Do not use detergent or any other cleaning liquids.
−
−
CAUTION
Do not wash the floor nozzle with water.
CAUTION
Attach the pre-motor filter correctly to avoid damaging motor.
Replacing the exhaust filter
Replace the exhaust filter once a year.
Detach two tabs of body cover from the rear side and replace the filter with a new one.
Put the body cover back to the main body.
Flat surface
face down
MC-CG522MC-CG524
or
TROUBLESHOOTING
Please check the following first if you have any problems.
Problem Solution
The appliance does not switch on. Check if the plug is connected firmly and the socket outlet is working normally.
If a thermal cut-out device has activated, wait approximately 60 minutes until it has reset.
−
−
The mains lead does not come out. Rewind and pull out the mains lead repeatedly while pressing the cord rewind pedal without using
excessive power.
−
The mains lead does not fully rewind. Pull the mains lead out 2 m to 3 m and then press the cord rewind pedal to rewind the mains lead
while holding the plug.
−
Suction power has decreased. Check if the dust bag is full.
Check for blockages in hose, telescopic wand, nozzles and pre-motor filter. Then clean those parts as
necessary.
−
−
If the problem cannot be solved, please contact your local customer service centre. The contacts can be found in “GUARANTEE”, the separate paper which has
been attached with the appliance.

4
Description MC-CG524 MC-CG522
Hose unit 1 PC
Curved wand set 1 PC
Connection wand 1 PC
Telescopic wand 1 PC
Floor nozzle
1 PC –
– 1 PC
Accessory Holder 1 PC
Crevice nozzle 1 PC
Dusting brush unit 1 PC
Exhaust filter
(HEPA filter)
YMV72K95000
1 PC –
Exhaust filter
(Electrostatic filter)
YMV30KDN000-P
– 1 PC
Pre-motor filter 1 PC
Dust bag
TYPE C-17H
(PACK 4/u.)
1 PC
Specifications are subject to change without notice.*
Vacuum Cleaner Consumables / Accessories
Specifications MC-CG524 MC-CG522
Power source 230 – 240 V ~ 50 Hz
Max input 1400 W 1300 W
Nominal input 1250 – 1300 W 1200 – 1250 W
Dimensions (W x L x H) 304 mm x 450 mm x 240 mm
Net weight 4.5 kg
Extension wands Telescopic
Floor nozzle √
Crevice nozzle √
Dusting brush √
Class with respect to protection against electric shock:*
Specifications

5
Home Appliance 12 Month Warranty from Date of Purchase
Subject to the conditions of this warranty Panasonic or it’s Authorised Service Centre will perform necessary service on the product without charge for
parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. For Line Communications products (i.e. Cordless
Phones, etc) the genuine battery(s) has a 3 month warranty.
This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised Distributors or Dealers and only
where the products are used and serviced within Australia or its territories. Warranty cover only applies to service carried out by a Panasonic Authorised
Service Centre and only if valid proof of purchase is presented when warranty service is requested.
This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as noted in the operating
instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers normal domestic use only (also Clip & Trim
Professional use) and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation, accident, misuse, neglect,
build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm activity, infestation by insects or vermin, tampering
or repair by unauthorised persons (including unauthorised alterations), exposure to abnormally corrosive conditions or any foreign object or matter having
entered the product.
This warranty does not cover the following items unless the fault or defect existed at the time of purchase:
(a) Cabinet Parts
(c) User replaceable Batteries from wear and tear in normal use
(e) Noise or vibration that is considered normal
To claim warranty service, when required, you should:
• Telephone Panasonic’s Customer Care Centre on 132600 or visit our website referred to below and use the Service Centre Locator for the name/address
of the nearest Authorised Service Centre.
• Send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of purchase date. Please note
that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged by you.
The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or re-installation of a product,
including costs related to the mounting, de-mounting or remounting of any screen, (and any other ancillary activities), delivery, handling, freighting,
transportation or insurance of the product or any part thereof or replacement of and do not extend to, and exclude, any damage or loss occurring by reason
of, during, associated with, or related to such installation, de-installation, re-installation or transit.
Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however, coverage will vary dependant on
product. For advice on exact Authorised Service Centre locations for your product, please telephone our Customer Care Centre on 132600 or visit our website
and use the Service Centre Locator.
In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the Australia Consumer Law.
If there is a major failure with the product, you can reject the product and elect to have a refund or to have the product replaced or if you wish you may elect to
keep the goods and be compensated for the drop in value of the goods. You are also entitled to have the product repaired or replaced if the product fails to be of
acceptable quality and the failure does not amount to a major failure.
If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by contacting the Panasonic
Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair or replace the product and will do so in a
reasonable period of time from receiving notice from you.
THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)
SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
If you require assistance regarding warranty conditions or any other enquiries, please visit the
Panasonic Australia website www.panasonic.com.au or contact by phone on 132 600
If phoning in, please ensure you have your operating instructions available.
Panasonic Australia Pty. Limited
ACN 001 592 187 ABN 83 001 592 187
1 Innovation Road, Macquarie Park NSW 2113
www.panasonic.com.au
PRO-031-F01 Issue: 5.0 01-01-2011
1.
2.
3.
4.
5.
6.
Panasonic Warranty
(b) Microwave Oven cook plates.
(d) Kneader mounting shaft unit and Heads, Cutters, Foils, Blades and other
accessories.

6
Home Appliance 12 Month Warranty from Date of Purchase
Subject to the conditions of this warranty Panasonic or it’s Authorised Service Centre will perform necessary service on the product without charge for
parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. For Line Communications products (i.e. Cordless
Phones, etc) the genuine battery(s) has a 3 month warranty.
This warranty only applies to Panasonic products purchased in New Zealand and sold by Panasonic New Zealand or its Authorised Distributors or Dealers
and only where the products are used and serviced within New Zealand or its territories. Warranty cover only applies to service carried out by a Panasonic
Authorised Service Centre and only if valid proof of purchase is presented when warranty service is requested.
This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as noted in the operating
instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers normal domestic use only (also Clip & Trim
Professional use) and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation, accident, misuse, neglect,
built-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm activity, infestation by insects or vermin, tampering
or repair by unauthorised persons (including unauthorised alterations), exposure to abnormally corrosive conditions or any foreign object or matter having
entered the product.
This warranty does not cover the following items unless the fault or defect existed at the time of purchase:
(a) Cabinet Parts
(c) User replaceable Batteries from wear and tear in normal use
(e) Noise or vibration that is considered normal
To claim warranty service, when required, you should:
• Telephone Panasonic’s Customer Care Centre on 09 2720178 or visit our website referred to below and use the Service Centre Locator for the name/
address of the nearest Authorised Service Centre.
• Send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of purchase date. Please note
that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged by you.
The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or re-installation of a product,
including costs related to the mounting, de-mounting or remounting of any screen, (and any other ancillary activities), delivery, handling, freighting,
transportation or insurance of the product or any part thereof or replacement of and do not extend to, and exclude, any damage or loss occurring by reason
of, during, associated with, or related to such installation, de-installation, re-installation or transit.
Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of New Zealand, however, coverage will vary
dependant on product. For advice on exact Authorised Service Centre locations for your product, please telephone our Customer Care Centre on 09 2720178 or
visit our website and use the Service Centre Locator.
Unless otherwise specified to the consumer the benefits conferred by this express warranty are additional to all other conditions, warranties, guarantees, rights
and remedies expressed or implied by the Consumer Guarantees Act of New Zealand and all other obligations and liabilities on the part of the manufacturer or
supplier and nothing contained herein shall restrict or modify such rights, remedies, obligations and liabilities.
THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)
SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
If you require assistance regarding warranty conditions or any other enquiries, please visit the
Panasonic New Zealand website www.panasonic.co.nz or contact by phone on 09 2720178
If phoning in, please ensure you have your operating instructions available.
Panasonic New Zealand Customer Care Centre
Phone: [phone]
Fax: [phone]
Email: [email protected]
Website: www.panasonic.co.nz/support
1.
2.
3.
4.
5.
6.
Panasonic Warranty
(b) Microwave Oven cook plates.
(d) Kneader mounting shaft unit and Heads, Cutters, Foils, Blades and other
accessories.

7
MEMO

Panasonic Manufacturing Malaysia Berhad (6100-K)
No.3, Jalan Sesiku 15/2, Section 15, Shah Alam Industrial Site,
40200 Shah Alam, Selangor Darul Ehsan, Malaysia.
http://www.panasonic.net/
© Panasonic Corporation 2012
Printed in Malaysia
V01ZDP00Y
A0712-0
Issued in July 2012