P&C COMBI-110 User manual

Notes: Porter & Charles reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Warranties: Please see the Use & Care manual or Porter & Charles website for a statement of limited
warranty. For more information on our entire line of products, go to www.porterandcharles.ca or call 905.829.3980 © Porter & Charles. All rights reserved. 1
GENERAL PROPERTIES
Front Load washer/dryer combination
Condensation drying technology, automatically drained
76L / 2.7 cu.ft. capacity
10kg Washing capacity
8kg Drying capacity
FEATURES
1400 RPM spin speed
15 Wash cycles
4 Drying cycles
Electronic control with LED display, white lights
Brushless DC Inverter Motor
3D Load Sensor
Quiet Operation
Cold water intake - heats to 90oC
20 Min. Quick Wash
Time Saver mode
PROGRAMS
Normal/Cotton, Perm Press, Heavy Duty, Bulk/Large, Sportswear,
Spin Only, Drain Only, Rinse & Spin, Tub Clean, Cold Wash, Sanitize,
Baby Care, Delicates.
TECHNICAL DETAILS
Electrical Requirements: 110/120 V / 60 Hz / 15 Amp
Supplied with a Canadian cord and plug.
Noise Level - Wash: 58 dBa
Noise Level - Spin: 77 dBa
Noise Level - Dry: 64 dBa
Water Pressure (Mpa):0.05 Mpa – 1 Mpa
Low Water Consumption: 112L/Cycle
Low Energy Consumption: 6.12kWh/Cycle
Energy Star®
DIMENSIONS
Product Dimensions In/mm (W/H/D)
231/2“ / 331/2” / 231/2“ (595mm / 850 / 595mm)
Cut-Out Dimensions In/mm (W/H/D)
253/8” / min. 357/16” / 261/2” (645mm / min. 900 / 673mm)
KEY FEATURES
Wash & Dry Your Clothes In One Cycle
Unique washer and dryer combo designed to give you more free
time. Load the machine, set to wash + dry, and come back to clean,
dry clothes.
1400 RPM Spin Speed
High spin speed helps to reduce drying time and save energy.
16 Wash Cycles
Multiple options to provide the proper care to all fabrics.
Heavy Duty Wash Cycle
Ideal for use with heavier loads of clothing.
Sanitary Cycle
Lets you run the machine at an extra high temperature.
Detergent Dispenser
Pull-out compartment for detergent and fabric softener.
Rinse & Spin Function
Best for preventing stains from setting in fabrics.
COMBI-110
24” Front Load 2-In-1 Combination Washer/Dryer

Notes: Porter & Charles reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Warranties: Please see the Use & Care manual or Porter & Charles website for a statement of limited
warranty. For more information on our entire line of products, go to www.porterandcharles.ca or call 905.829.3980 © Porter & Charles. All rights reserved. 2
PRODUCT DIMENSIONS (INCH/MM)
Width: 231/2“ / Height: 331/2” / Depth: 231/2“
Width: 595mm / Height: 850mm / Depth: 595mm
CUT-OUT DIMENSIONS (INCH/MM)
Width: 253/8” / Height: 357/16” / Depth: 261/2”
Width: 645mm / Height: 900mm / Depth: 673mm
COMBI-110
Installation Details

Notes: Porter & Charles reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Warranties: Please see the Use & Care manual or Porter & Charles website for a statement of limited
warranty. For more information on our entire line of products, go to www.porterandcharles.ca or call 905.829.3980 © Porter & Charles. All rights reserved. 3
Hoses and Connections -
Installing the appliance in a narrow space
• Installing the laundry appliance in a narrow space may bend or
crush the connections (hoses, power cord). Take great care in
order to reduce the possibility of damaging the connections when
installing or removing the appliance.
• A through hole with a diameter of at least 10 cm (4”) is required to
pass the hoses and power cord . Make sure there are no rough
edges that could damage the power cord or hoses. If the laundry
appliance is installed in a metal unit protect the edge of the through
hole for the hoses and power cord with a gasket. Do not use
extension cords when making the electrical connection.
Installation Clearance
1. The location must be large enough to allow the washer door to be fully opened.
2. Additional spacing should be considered for ease of installation and servicing. The door opens more than 90° and is not reversible.
3. Additional clearances might be required for wall, door, and floor moldings.
4. Additional spacing of 25mm on all sides of the washer is recommended to reduce noise transfer.
5. Companion appliance spacing should also be considered.
COMBI-110
Installation Details

871 Cranberry Court, Oakville, ON
L6L 6J7 Canada
905.829.3980
1-800.421.6332
[email protected]
101-1014 Homer Street, Vancouver, BC
V6B 2W9, Canada
604.235.3980
1-855.ELA.WEST (352.9378)
[email protected]
Other Product Downloads Available at porterandcharles.ca
WARRANTY INFORMATION
Porter & Charles Appliances are designed and manufactured to the highest standards.
Each appliance is covered by a comprehensive 2-year parts and labour warranty.
Refer to product warranty policy for complete terms and conditions.
FOR PARTS & SERVICE
Euro-Parts & Service
39822 Belgrave Road, Belgrave, ON. N0G 1E0 1 866 722 2262
www.euro-parts.ca • [email protected] • [email protected]
Porter & Charles appliances are imported and distributed in North America by Euro-Line
Appliances Inc. For more information, please visit one of our showrooms or www.ela.ca /
www.elawest.ca
Download User Manual