PAPERANG PKT-LP108 User manual

Thermal Label Printer
USER MANUAL

OVERVIEW
Congratulations on your purchase.
Please take a moment to thoroughly review
this user guide as incorrect operation may
result in damage to your printer or injury.
WARNING
Printer head (TPH) may be very hot.
Please do not touch the printer head or
parts around it after printing.
See additional safety notices on Page 14.
2
This label printer is engineered for real-time and batch
label printing to streamline your shipping process.
As a thermal printer, it does not require any ink or toner.
All prints will be made by heating compatible labels.

1. Ensure the printer is OFF 2. Connect the power cable
3. Connect the USB cable 4. Turn the power ON
Continue to Driver Installation
3
QUICK START

LATEST DRIVER
For the latest driver, please visit
paperang.com/en/pc/download
4
DRIVER INSTALLATION
» Windows » Mac
Please plug in the USB drive to your computer and
run the software that matches your computer's
operating system, OR directlly run the downloaded
software from the web address indicated above.
Then follow the prompt to complete installation.

1. Open Your Printer Page
In your control panel, open
the printer page, and right
click on your newly installed
printer “PKT-LP108” and
choose “Printing Preferences.”
2. Go to the Advanced Setting
Click on the “Advanced...”
button.
3. Set the Paper Size
5
WINDOWS SETUP PRINTING
When printing your file, please
ensure “Paper Size” is set correctly
for your label. The most common
size is 4” x 6” (100mm x 150mm).

6
1. Open Your Printers Page
In System Preferences, open
Printers & Scanners, and click
on the “+” button to add a
new printer.
2. Select Software
Highlight Thermal Printer
and choose “Select Software”
under “Use” drop-down menu.
Search for Paperang Printer and
click on Ok / Add.
3. Set the Paper Size
ensure “Paper Size” is set
When printing your file, please
correctly for your label. The
most common size is 4” x 6”
(100mm x 150mm).
MAC SETUP PRINTING

This label printer is capable of working with many labels.
follow these steps:
1. Turn the printer
OFF
2. Press the side release
button to open the cover
3. Load your label and make sure the guides are
flush against the label with no gap.
7
LABEL SETUP
It needs to learn your label properties prior to its first use.

LABEL SETUP
6. Press and hold the
feeder button until
you hear one beep.
7. The label printer will start
automatic label identification.
8
4. Carefully close
the cover.
5. Turn the power ON and
wait 5 seconds until the
printer is initialized (you
will hear two beeps).

Install the Paperang Biz app (available on Apple App
Store and Google Play Store) on your mobile device.
Open the Paperang app and tap +to go to the list
of devices.
Choose "Paperang_LP108" to connect it with your
device.
Choose a file from the app or directly open a document
using the Paperang Biz app to start printing.
9
How to use the printer with your mobile devices:
1.
2.
3.
4.
5.
PRINTING ON PHONE
Power on the printer.

and open the cover.
Wait until the printer head cools down. The
printer head can be very hot after printing.
Completely clean printer head using an alcohol
swap (not water).
Wait until the alcohol has completely
vaporized, then close the cover.
10
Printer Head Cleaning Steps:
1.
2.
3.
4.
5.
NOTICE
maintenance.
Do not touch or scratch the printer head surface,
roller, or sensors.
Avoid gas, acetone, or other organic solvents.
MAINTENANCE
Check if it is clean: connect the power cord > turn
on the printer > press and hold the circle feeder
button until you hear two short beeps > print the
self-test page
Turn the printer off, remove the power cord,
Ensure power is off when performing

Press the circle feeder button on the printer to
skip a blank label.
To run a self-test, press and hold the feeder
button until you hear two short beeps.
Avoid poor quality labels as they can damage
the printer.
Regularly clean the printer head.
If paper is jammed, turn off the printer, and
allow the printer head to cool down. Open the
cover and ensure that the rubber is clean. If
dirty, use alcohol to clean. Allow the area to
Insert this label printer into the same USB port
on your computer every time. This will avoid
creating duplicate copies of the printer in
your operating system.
11
PRO TIPS
dry off before turning the printer on.
Anytime you change your label, run the
automatic label identification.

Light Description Troubleshoot
Green Normal
operation
Printer head is
overheated
Printer will
automatically
resume once the
printer head has
cooled down.
Flashing
Red (every 2
seconds)
Paper shortage Be sure that the
printer paper is
loaded correctly.
You may need to
Flashing Red
(twice every
second)
Cover is not
closed
Check that the
cover is completely
closed.
12
LED STATUS
Flashing
Red & Green
run automatic label
identification.

SPECIFICATIONS
Method Direct Thermal
Model PKT-LP108
Resolution 203dpi
Max PrintingSpeed 150mm/s
Paper Width 40-108mm
Power Adapter 24V⎓2A
Printing Life TPH 30km
Operating
Environment
Temperature: 5 to 40°C
Humidity: 20-90% (non condensing)
Storage
Environment
Temperature: -25 to 55°C
Humidity: 20-93% (non condensing)
Connection USB, Bluetooth
Weight 1.83lbs / 830g
Dimensions W 183mm * D 100mm * H 95mm
13

SAFETY NOTICES
The printer head can become very hot after printing
labels. Do not touch the printer head.
Do not bend the power cord excessively or place
objects on the cord.
Keep the printer out of reach of children
Use only approved accessories and do not try to
disassemble, repair the unit by yourself
Keep the printer away from water and other
objects that could penetrate the components
Please unplug the printer when it is not in use
for long periods
14
Do not use the printer if you find any irregularities
as these could result in fire or electrocution.

SUPPORT
Your Paperang printer is covered by a one-year
warranty.
In the unlikely event that you experience any
issues with your printer, please contact Paperang
priority customer service to promptly receive
troubleshooting tips or a replacement.
Forany questions and/orsuggestions, please email
Paperang is a registered trademark of
Xiamen Paperang Technology Co., Ltd.
© 2022 Xiamen Paperang Technology Co., Ltd.
All Rights Reserved.
us via [email protected].
15

Version 1.0.0
LEGAL STATEMENT
Caution: This equipment is compliant with Class A of CISPR 32. In a
residential environment this equipment may cause radio interference.
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.