PAPERANG MonoSnap Pro User manual

!
!
MonoSnap Pro (Ages 13+)
USER MANUAL
!
!
Model:
PCZ2
Customer Service
Scan the QR code to join our !
Telegram group for support.!
Please be sure to specify the
model number.
This guide contains all the info you need to get from setup to your shots.
Use with official grayscale thermal paper for best printing quality.
Grayscale printing may not be available in certain countries.

!
LED Power !
Button
Shutter !
Button
Lens
USB-C Port
Print Head
Serrated Edge
Reset Hole
Fig. 2
Fig. 3
Fig. 1
Accessories Included
At a Glance

Chapter 1: Safety Instructions!
1. Adult Supervision: The MonoSnap camera is designed for teenagers and above.
Use the camera under adult supervision to ensure safe handling.!
2. Safe Handling: Hold the camera securely and avoid touching the internal print
head while it is hot. Wait for it to cool down before attempting to open the
camera.!
3. Built-In Rechargeable Battery: Use only the provided USB-A to C cable for
charging the MonoSnap camera. Other cables may not be compatible and could
pose safety risks.!
4. Proper Charging: Connect the USB-A end of the cable to a suitable USB-A
power source. Insert the USB-C end into the camera's charging port. Monitor
the charging process and disconnect the cable once the battery is fully charged.!
5. Battery Maintenance: To maximize battery life and safety, avoid exposing the
camera to extreme temperatures (both hot and cold). Do not attempt to
disassemble, puncture, or tamper with the battery or camera.!
6. Waterproof Caution: Please note that the MonoSnap camera is not waterproof.
Keep the camera away from water and moisture to avoid damage. Do not
submerge the camera or expose it to rainy or wet conditions.!
7. Proper Storage: Store the MonoSnap Pro camera in a safe place when not in
use. Keep it out of the reach of young children and away from moisture, extreme
temperatures, and direct sunlight.!
8. Responsible Sharing: Respect the privacy of others and obtain permission
before taking photos. Share photos responsibly and with respect for others'
rights.!
Chapter 2: Getting Started
a. Use It As an Instant Camera
1. Charging Your MonoSnap!
•Connect the USB-C end of the provided cable to your MonoSnap camera.!
•Plug the other end of the cable into a USB-A power source.!
•Allow the camera to charge until the battery is full (It takes about 1.5 hours to
fully charge).!
2. Powering on!
•Locate the power button on your MonoSnap camera.!
•Press and hold the power button for 3 seconds to power on the camera.!
3. Launching the Viewfinder !
•Press the red button on top to extend the viewfinder for framing your shot. You
can manually push the viewfinder back after use.!
NOTE: The MonoSnap uses a special viewfinder located slightly above the
camera's lens. This means that what you see through the viewfinder is from a
different perspective than what the lens is seeing. As a result, you’ll need to
adjust your aim a little upwards to compose your shot correctly. (Fig. 1)
4. Capturing a Photo !

•Point the camera at your subject using the viewfinder.!
•Press the shutter button to instantly capture the photo.!
5. Printing and Sharing!
•Wait for the camera to process the image and print it instantly.!
•Once printed, carefully tear offthe photo against the serrated edge.!
•Share the instant printout with others or keep it as a physical memento.!
6. Loading the Paper Roll!
•Slide to open the paper compartment cover. (Fig. 2)!
•Remove the remaining paper roll, if present. !
•Insert a new paper roll into the compartment and make sure the smooth side of
the paper is facing up. (Fig. 3)!
•Close the paper compartment cover securely. !
7. Powering off!
•Press and hold the power button for 3 seconds to power offthe camera after
use.!
b. Use It As a Thermal Printer
1. Download and install the PAPERANG app.!
2. Press & hold the power button for 3 seconds to turn on the printer.!
3. Turn on Bluetooth on your mobile device and place it close to the printer.!
4. Launch the PAPERANG app.!
5. Pairing with the printer!
Method 1: Tap the ⊕button in app > Choose “PAPERANG P2 Camera” from
the list of nearby devices > Complete pairing.!
Method 2: Double press the power button to print a QR code > Tap the [—]
button in app to scan the code > Complete pairing.!
6. Select the paper type to be used.!
7. Start printing using the PAPERANG app. (For more info on how to print
documents with your smartphone, select “Documents Print" and tap the “?”
icon from the upper right corner of the app).!
8. Tearing offthe print manually.!
9. Press and hold the power button for 3 seconds to turn offthe printer after use.!
Chapter 3: Problems? No Problem!
How long can it be used on a single charge?!
•One roll of 300dpi grayscale print.!
Why is there a discrepancy between the range printed and what is seen through
the viewfinder? !

•The viewfinder design is similar to that of a rangefinder camera, resulting in a
slight deviation between the viewfinder and camera lens. The actual captured
image may appear slightly lower than what is seen in the viewfinder. Shooting
technique: Align the subject within the viewfinder and slightly lift the bottom of
the camera by about 5 degrees for the best results. (Fig. 1)!
What is the resolution of the camera? !
•The camera has a 1-megapixel wide-angle lens with a DFOV of 70 degrees. It
also comes with an ISP for professional image processing. It delivers good
imaging results when capturing subjects from a distance of half a meter or more.!
How to unbind the device?!
•Log in to the PAPERANG app using the PAPERANG account that is bound to
the device. Click on the device name in the upper-left corner, access the three
dots menu, and select "Delete PAPERANG."!
How long does it take to fully charge?!
•It takes about 1.5 hours to fully charge.!
Unable to connect to the PAPERANG app? !
•Check if Bluetooth is enabled on your phone and if a usable network connection
is established.!
•Verify that the Bluetooth permission is granted on your phone. Some Android
systems require granting location access.!
•Ensure that the camera has sufficient battery power (press and hold the power
button for 3 seconds to confirm if it can be powered on; if not, charge it first).!
•Check if the printer is bound to other devices; if so, it needs to be unbound first.!
Unable to print? !
•Ensure that Bluetooth is enabled on your phone and verify that it is not
connected to other devices.!
•Check if the thermal paper has run out.!
•Check if the thermal print head is overheated (indicated by a flashing white
light). If overheated, wait for the print head to cool down before attempting to
print again.!
•Restart the camera and try reconnecting the Bluetooth.!
Why is no content being printed? !
•Confirm that the consumables are installed correctly, with the correct orientation
(that is, the smooth side faces up). (Fig. 3)!
How to restart the device if it freezes?!
•Slide open the compartment cover, remove the consumables, and press the
Reset pinhole once with a paperclip to restart the device.!
How to check the battery level?!

•If the device is connected to the PAPERANG app, click on the device name in
the upper-left corner of the app, and the remaining battery level will be
displayed.!
Does this printing camera require carbon ribbons?!
•It is a thermal printer that does not require carbon ribbons or ink cartridges. Only
thermal paper is needed for printing.!
What is the difference between regular thermal paper and grayscale thermal
paper?!
•Grayscale paper has a brighter surface and provides more delicate print results.!
Does the printing paper contain bisphenol A?!
•The provided paper roll does not contain harmful substances such as
fluorescent agents, bisphenol A, or bisphenol S.!
How long does the printout last?!
•The printout has a longevity of at least 5 years.!
Chapter 4: Specifications
Model
PCZ2
Technology
Direct Thermal Printing
Print Resolution
300dpi
Min. Print Speed
2.3mm/s
Connectivity
Bluetooth
Compatible Consumable
Grayscale Thermal Paper (57 x ⌀30mm)
Photo Aspect Ratio
4:3
Megapixels
1MP
Lens
Wide-Angle Lens
Focus Range
50cm - Infinity
Diagonal Field of View
70-Degree
Battery Capacity
1,200mAh
Interface
USB-C
Input
5V⎓1A
Weight
approx. 250g (exl. paper roll)
Dims.
105 x 90 x 52mm

!
© 2023 Xiamen PAPERANG Technology Co., Ltd. All Rights Reserved. !
PAPERANG is a registered trademark of Xiamen PAPERANG Technology Co., Ltd.