Parachute Horizon Bed Frame User manual

Horizon Bed Frame
Assembly Instructions

Before getting started:
Remove instructions from side of box and clear the area of fragile objects. Assembly requires two people.
Read instructions carefully and keep for future reference.
The following tools (not included) are required for assembly:
Phillips Head Screwdriver
7/16” Wrench Small Crescent Wrench
Hex Bolts x 12
Wood Screws x 8
Parts list:
Headboard x 1
Footboard x 1
or
Center Rail x 1
Bed Slats x 2 sets
2 / 7
Assembly Instructions
or
Footboard x 1
Side Rail x 2

1
Attach first side rail to headboard by placing side rail on the outside of the bracket.
NOTE: Ensure side rails are right side up, with the upholstered side up.
2
Line up top and bottom holes of the side rail to the top and bottom holes of the bracket.
Screw in and tighten hex bolts into the top and bottom holes.
NOTE: Loosely hand thread all
bolts and screws first while putting
each piece together. When each is
aligned, securely tighten bolts and
screws in place. If screws/bolts
don’t thread in, try loosening metal
brackets to align.
3Repeat Step 2 on the opposite side with remaining side rail.
3 / 7
Assembly Instructions
OR

4
Repeat Steps 2 through 3 on the footboard.
NOTE: Footboard may vary.
5
Line up top and bottom holes of the center rail with the top and bottom holes of the center bracket.
4 / 7
Assembly Instructions
OR

6
Screw in and tighten hex bolts into the top and bottom holes on the headboard.
7Repeat Step 6 on the footboard.
Assembly Instructions
5 / 7
NOTE: Footboard may vary.
OR

8
6 / 7
Assembly Instructions
Align one set of slats with the center mark inside of each side rail.
NOTE: The set of 6 slats should be placed closest to the foot of the bed, and the set of 5 slats
should be placed closest to the head.
9
Place first set of slats on first center mark inside of each side rail.
Screw in wood screw into slat closest to center mark on each side rail.

10
Stretch out first set of slats until fully extended.
11 Screw in wood screw into the last slat of the fully extended unit.
12 Repeat Steps 8-11, starting with the second center mark on the inside of side rails.
7 / 7
Assembly Instructions
NOTE: Footboard may vary.
OR