Paralenz DIVE CAMERA User manual

PARALENZ® DIVE CAMERA
QUICK START GUIDE
Select the power mode on the
selector ring and hold the acti-
vation switch for 4 seconds – to
turn off hold for 4 seconds.
INSERT SD-CARD
CHARGE THE CAMERA
TURN ON CAMERA
SELECT MODE
TURN PAPER TO SEE MORE
Hold 4 sec.
Use the selector ring to choose a mode. You
can choose between power mode, video mode,
photo & snap record mode, custom mode and
settings mode.
Make sure that the camera is turned off. Unscrew
the end cap and insert a micro SD-card, which
should be class U3 or V30. A capacity of 32 GB or
more is recommended.
Use an USB charger that can deliver 2.1 A for fast charging.

To take pictures select the photo & snap record
mode on the selector ring. To take a picture click
once on the activation switch.
If you want to record a short video then select the photo & snap record
mode on the selector ring. Hold the activation switch to make a short
video and just release the switch to end recording.
To start recording hold the activation switch for 1
second – to stop recording hold for 1 second. You
can select either video, slow motion, time-lapse
or photo burst for the custom mode.
RECORD VIDEO
TAKE PICTURE
SNAP RECORD
CUSTOM MODE
In the settings you can change resolution, frames
per second, turn Wi-Fi on/off and choose your cus-
tom mode. See the manual for more information.
SETTINGS
Toggle DCC™ on/off by clicking three times on the activation switch
while in power- or video-mode. Choose blue or green in DCC settings.
DCC™
To record a video select the video mode on the
selector ring. To start recording hold the activation
switch for 1 second – to stop recording hold for 1
second.