PARAMOUNT BED PF-1100A Series User manual

PF -
1100A/1200A series
Thank you for purchasing the bedside cabinet.
This instruction manual describes precautions how to safely use and operate the bedside cabinet.
Before using this bedside cabinet, read this instruction manual to fully understand the safe and proper
operating procedures.
The correct operating procedures should be explained not only to the persons using the bed but also to
caregivers.
After reading this instruction manual, keep it where it can be easily accessed for later reference.
The actual product purchased may differ from detailed descriptions given in this instruction manual due to
product improvements.
For any queries, please feel free to directly contact your dealer.
Intended use
This bedside cabinet is designed to be used as a storage furniture at the bedside.
Bedside Cabinet
Part names and part confirmaons
After unpacking, check that there are no damaged parts. If any parts are damaged, contact your dealer.
Cabinet top
Towel rail
Caster
Shelf board
Door
Drawer
Sub-table
Door attachment hole
Shelf
Safety lock
(PF-1101A/1201A only)
<PF-1100A/1101A> <PF-1200A/1201A>
(PF-1100A/1101A only)
7A10744400A1

1
Safety precautions
■Do not directly place a heated pot, water boiler (60℃or
higher) or other such device on the cabinet top, sub-table or
shelf board.
●The cabinet may be deformed and discolored.
■Do not apply more than 30kg on the bedside cabinet.
●Load capacity is 30kg. Do not place objects exceeding the load capacity on the bedside
cabinet because it may damage the bedside cabinet resulting in an injury.
■Do not apply anything heavy on the sub-table or shelf board.
●Do not place anything heavy on the sub-table or shelf board because it may damage the
bedside cabinet resulting in an injury.
Operation procedures
●
The sub-table and drawer can be interchanged.
(PF-1100A only)
●
The shelf board can be placed at three different
levels.
●
The towel rails are placed at both sides
of cabinet top and pull-out when in use.
●
The drawer can be detached for cleaning.

Upper pin
Lower pin
Door attachment hole
2
Detaching and attaching the door
■
The door can be changed the right-hand for the left-hand if necessary.
<Detaching the door>
①
Pull out the upper pin from the door
attachment
hole
about 1cm with flathead screwdriver.
②
Incline the door and detach it.
<Attaching the door>
①
Insert the upper pin into the door attachment hole.
②
Push down the lower pin into the door attachment
hole.
Using the key (PF-1101A/1201A only)
■
The drawer can be locked by using the key. (PF-1101A / 1201A only)
Door attachment
hole
Flathead screwdriver
Door attachment hole
Door
Upper pin
<Unlocking the drawer>
①
Insert the key into the hole.
②
Slide the key to the left.
<Locking the drawer>
①
Slide the key to the right.
②
Pull out the key.
Key
Key
Key
Key
Hole
●
If the key is lost, the master key can be used and the cartlidge can be changed too. Please feel
free to directly contact your dealer.
①
②
①
②
Blue
Orange

Made of steel, powder coating (part is resin mold items)
Made of steel, chrome plating
Made of resinMaterial
Body and door
Cabinet top, drawer,
sub-table, shelf board
Towel rail
Product Name
Bedside Cabinet
Model No.
PF-1100A
PF-1101A
PF-1200A
PF-1201A
454 x 469 x 930
454 x 469 x 772
Caster
Dimensions (mm)
40mm dia. x4pcs
2020.05
Specificaons
Maintainance and cleaning
Long-term storage
To clean the cabinet, use a cloth that has been soaked in diluted detergent and wrung out well, then
wipe off any residual detergent with a cloth soaked in water and wrung out well. Finally, use a dry cloth
to wipe the cabinet to ensure it is dry.
To wash the cabinet by water, pour water the cabinet to wash out stains. Finally, use a dry cloth to
wipe the cabinet to ensure it is dry.
To disinfect the cabinet, always dilute detergents used as specified below and follow the instructions
described in the instruction manual for disinfectant.
76.9% - 81.4% ethanol for disinfection
0.05% - 0.2% benzalkonium chloride (e.g. Osvan)
0.05% - 0.2% benzethonium chloride (e.g. Hiamine)
0.05% chlorhexidine gluconate (e.g. Hibitane)
0.02% - 0.05% sodium hypochlorite (e.g. Milton)
Do not use volatile cleaning fluids (such as paint thinner,
benzene or gasoline) and cresol. Discoloration or deterioration
could result.
Do not use disinfectant other than specified. There is a risk
of damage or transformation.
After wrung out the cabinet with detergent, be sure to wipe any residual detergent with a cloth
soaked in water and wrung out well. Otherwise, there is a risk of damage of plastic parts.
The product should not be cleaned with an ozone sterilizer or autocrave apparatus.
The following precautions should be noted when the cabinet is not use for extended periods of time.
1. Do not place anything on the cabinet.
2. Store the cabinet a low-dust environment away from high temperatures, high humidity or low
temperatures.
3. Make sure to keep this instruction manual.
Put the color code after the product code.
Subject to normal manufacturing tolerance