
Using Your Humidier
Add water
Specications
1. Lift the water tank and turn it upside down.
2. Remove the tank cap and ll the tank with puried water only.
3. Attach the tank cap and put the tank back onto the base securely. Put the nozzle back on. FCC Compliance
This device complies with Part 18 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and
recycle them responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their local
government ofce, for details of where and how they can take these items for environmentally
safe recycling. Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
Operations & Functions
1. Connect to a power source, press the ON/OFF button to turn on the humidier. (Default: medium mist)
2. Press the ON/OFF button to turn off the humidier. (fan will run for another 3 mins)
Note: Do not add water into the base or through the nozzle.
Do not add essential oil or medicinal tablets into the water tank.
Mist Adjustment
·Press the Mist button to cycle through Medium-High-Low mist levels.
Humidity Settings
·Press the Humidistat button to set the humidity level (40%-80%, 5% increments).
·When the preset humidity level is reached, the unit stops misting and DESIRED is displayed.
·To cancel, hold the button for 1.5 seconds or set the level to 00.
Note: The most comfortable environmental humidity is 40%-60%. Please adjust the mist as needed.
Timer for Shutoff
·Press the Timer button to set the timer for shutoff (0-12H, 1H increments).
·To cancel, hold the button for 1.5 seconds or set the timer to 0.
Sleep Mode
·Press the Sleep button to enter/exit the Sleep mode.
·Press any button except Light button to wake up the unit.
Tank Light Control
·Press the Light button to turn on/off the tank light.
·The tank light can be turned on/off separately.
Low Water Protection
When low water in the water reservoir, the humidier stops misting and lights up. It is
designed to prevent the humidier from possibly overheating and damaging the atomizer.
Memory Function
If power is not disconnected, the humidier will always remember your last settings (mist level,
humidity & brightness) once it is turned on again.
Model PE-AH007
Operating Voltage 100-120V~ 50/60Hz
Rated Power 21W
Water Tank Capacity 4.0L/1.06Gal
Mist Output Min: 100ml/h
Medium: 180ml/h
Max: 250ml/h
Manufacturer: Shenzhen NearbyExpress Technology Development Co., Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
www.parisrhone.co
Made In China
Rev_1.0
1 2 2 3
MIST+/— HUMIDISTAT TIMER
LIGHT ON/OFF SLEEP
MIST+/— HUMIDISTAT TIMER
LIGHT ON/OFF SLEEP