Parker IQAN-LSL User manual

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR
SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide
product and/or system options for further investigation by users having technical expertise. It is important that you analyze
all aspects of your application, including consequences of any failure, and review the information concerning the product or
system in the current product catalogue. Due to the variety of operating conditions and applications for these products or
systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products
and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing,
are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Installation IQAN-LSL
Dual sensor output
Wiring diagrams
task oriented control
or expansion module
IQAN-LSL
Publ.no: HY33-8302-IS/UK
Ed. 05/2011
Mating connector kit: 5031097
(2004/108/EC)
For further information see:
HY33-8302-IB/UK Instructions IQAN-LSL
0
20
40
60
80
-20
-40
-60
-80
-40 - +70 °C
start
start
stopstop
max max
min min
AA
BB
EnterEnter
Adjust
Adjust
SETUP- push 1 sec.
®
TOC2
SlopeSlope
Current Current
with switch
90% Vs
50% Vs
10% Vs
VDC out
-100% 100%
Neutral
position
Output B
Output A
Deflection
WARNING
Pin # Signal/Function C1
1 GND
2 VS (+5V)
3 VOUT-A (primary)
4 VOUT-B (secondary)
C1C2
Pin # Signal/Function C2
1 DOUT, MAX 200 mA
2 +BAT
(+12V, +24V)
Mating connector kit: 5031098 with detentMating connector kit: 5031098
Pin # Signal/Function C2
1 GND
2 +BAT
(+24V only)
Pin # Signal/Function C1 Pin # Signal/Function
4 VOUT-B (secondary) 1 GND
3 VOUT-A (primary) 2 VS (+5V)
Mating connector kit: 5031113
or
Pin # Signal/Function C1 Pin # Signal/Function
6 +BAT (+12V, +24V) 1 GND
5 DOUT, MAX 200 mA 2 VS (+5V)
4 VOUT-B (secondary) 3 VOUT-A (primary)
Pin # Signal/Function C1 Pin # Signal/Function
8 +BAT (+24V only) 1 GND
7 GND (detent magnet) 2 VS (+5V)
6 +BAT (+12V, +24V) 3 VOUT-A (primary)
5 DOUT, MAX 200 mA 4 VOUT-B (secondary)
Mating connector kit: 5035015
Pin # Signal/Function C1 Pin # Signal/Function
6 +BAT (+24V only) 1 GND
5 GND (detent magnet) 2 VS (+5V)
4 VOUT-B (secondary) 3 VOUT-A (primary)
Mating connector kit: 5035014
-S (AMP/Tyco)
-D (Deutsch DT)
with switch
with detent
with switch and detent
Eng. no: M5010029A
Rev. E
Mating connector kit: 5035014

IQAN-LSL IQAN-LSL
Mounting hole dimensionsRequired screw engagement
unit = mm
Tt = 0.8 - 1.0 Nm
length = 250
PT40 screw
8,0 ±1
30
28
100
91
Ø5,0
max
R2,5
111
29
57
90
112 42
NOTICE
Screw engagement must be 7-9 mm.
• Less engagement and the screw
may not hold.
• More engagement and the
housing may be damaged.
NOTICE
Connectors must be properly installed
to meet environmental specification.
• Sealing plugs must be inserted in
all unused pin positions.
• All connectors must be installed.