Parkside PTSS 1200 C1 User manual

IAN 310942
PLUNGE SAW PTSS 1200 C1
TAUCHSÄGE
Originalbetriebsanleitung
PLUNGE SAW
Translation of the original instructions

GB/IE/NI Translation of the original instructions Page 1
DE/AT/CH Originalbetriebsanleitung Seite 13
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.

A B
C
8a
9a
14a
14b
X

PTSS 1200 C1 GB│IE│NI │ 1 ■
Contents
Introduction......................................................2
Intended use................................................................ 2
Features ................................................................... 2
Package contents ............................................................ 2
Technical data .............................................................. 2
General power tool safety warnings .................................3
1. Work area safety .......................................................... 3
2. Electrical safety ........................................................... 3
3. Personal safety............................................................ 4
4. Power tool use and care .................................................... 4
5. Service .................................................................. 5
Appliance-specific safety instructions for circular saws ..................5
Safety information for circular saw blades......................................... 7
Original accessories/auxiliary equipment ......................................... 7
Operation .......................................................7
Fitting/changing the saw blade ................................................. 7
Connecting the sawdust extraction device ......................................... 7
Check that the blade guard is functioning ......................................... 7
Operation .......................................................8
Switching on and off ......................................................... 8
Setting the cutting depth (dive depth)............................................. 8
Setting the cutting angle (mitre angle) ............................................ 8
Note the cut line............................................................. 8
Connecting the guide rails ..................................................... 8
Eccentric screws ............................................................. 9
Sawing (without guide rail) .................................................... 9
Sawing (with guide rail)....................................................... 9
Plunge cutting with guide rail .................................................. 10
Cleaning and maintenance ........................................10
Disposal........................................................10
Kompernass Handels GmbH warranty ..............................11
Service .........................................................12
Importer .......................................................12
Translation of the original Conformity Declaration .....................12

PTSS 1200 C1
■ 2 │ GB│IE│NI
PLUNGE SAW PTSS 1200 C1
Introduction
Congratulations on the purchase of your new appli-
ance. You have selected a highquality product. The
operating instructions are part of this product. They
contain important information on safety, usage and
disposal. Before using the product, familiarise your-
self with all operating and safety instructions. Use
the product only as described and for the specified
areas of application. Please also pass on these
operating instructions to any future owner.
Intended use
This circular saw (hereinafter “appliance” or “ma-
chine”) is designed for longitudinal, cross and
plunge cuts in firmly supported solid wood, chip
board, plastics and lightweight construction mate-
rials. Working with metals is not permitted. This ap-
pliance can be used with the provided guide rails
– exclusively for the cutting techniques described.
Any other uses of or modification to the appliance
is deemed to be improper and carries the risk of
serious personal injury. Not for commercial use.
Features
Safety lock-out
ON/OFF switch
Handle
Hex key (small)
Hex key (large)
Motor unit
Chip ejector adapter
Fine adjustment screws for 0° cutting angle
8a
Fine adjustment screw for 45° cutting angle
Baseplate
9a
Markings for cutting line
Eccentric screw (2 x)
Adjustment wheel for cutting
angle adjustment (2 x)
Cutting depth adjustment
Cutting depth scale
Saw blade
14a
Clamping screw/plain washer
14b
Panel cut out
Additional handle
Cutting width marking
Chip ejector (rotatable)
Clamping lever for changing saw blades
Spindle lock
Groove for guide rails
Guide rail
Grub screws
Connector
Xflange (factory-fitted)
Package contents
1 circular saw
1 saw blade 165mm / 24 teeth (pre-fitted)
2 guide rails
1 connector
1 chip ejector adapter
2 Hex keys
1 set of operating instructions
Technical data
Rated voltage: 230 V~50 Hz
(Alternating current)
Nominal power input: 1200 W
Idle speed: n0 5200 min-1
Sawblade mount: ø 20 mm
Saw blade: 165mm
max. 65 mm
Ø 165 mm
Main blade width: 1.5 mm
Tooth thickness: 2.6 mm
Max. cutting depth: 56 mm at a 90°
mitre angle
42 mm at a 45°
mitre angle
5 mm less with guide rails
Protection class: II/ (Double insulation)
Accessories: Guide rails 2 x
700mm x 180 mm
165mm
max. 65 mm