Parrot Zik-2 User manual
User guide
Mode d’emploi
Manual del usuario
Bedienungsanleitung
Guida all’uso
Gebruikershandleiding
Manual do utilizador
έλΗΧϣϟϡΩΧΗγϣϟϝϳϟΩ
English ...............................................
Français .............................................
Español .............................................
Deutsch .............................................
Italiano ..............................................
Dutch ................................................
Português .........................................
................................................
p.5
p.17
p.31
p.43
p.55
p.67
p.79
p.91
ENGLISH 5
Content
Getting started..................................................
Music ................................................................
Parrot Audio Suite 2 .........................................
Telephone ........................................................
Troubleshooting ..............................................
General information .........................................
p.6
p.8
p.9
p.10
p.12
p.13
User
Guide
ENGLISH
6
Getting started
Battery
To install the battery, lift up the magnetic cover on the left hand speaker and insert
the battery in its compartment.
Before you use it for the first time, the Parrot Zik 2.0 must be fully charged. To do
this, connect the Parrot Zik 2.0 to your computer via the USB to micro-USB cable.
The button illuminates with a red light to show that the device is charging. Once
charging is complete, the button light blinks in white.
Switching the Parrot Zik 2.0 on/o
Press the button to switch the product on/o.
You can set a period of time after which the Parrot Zik 2.0 automatically switches
itself o. To do so, launch the Parrot Audio Suite 2 application and select ^ĞƫŶŐƐх
ƵƚŽƐǁŝƚĐŚŽī. This option is deactivated by default.
Note: &ŽƌƚŚĞ WĂƌƌŽƚŝŬ ϮϬ ƚŽƐǁŝƚĐŚ ŽīĂƵƚŽŵĂƟĐĂůůLJ LJŽƵ ŵƵƐƚŶŽƚďĞ ĐŚĂƌŐŝŶŐŽƌ
ƵƐŝŶŐŝƚ DĂŬĞƐƵƌĞƚŚĂƚ ƚŚĞƐĞŶƐŽƌ ůŽĐĂƚĞĚŽŶƚŚĞƌŝŐŚƚŚĂŶĚƐƉĞĂŬĞƌĚŽĞƐŶŽƚƚŽƵĐŚ
ĂŶLJƚŚŝŶŐ
Wearing the headset
Adjust the band without forcing it, so that the headphones will fit comfortably
over your ears, then put the headset on, using the letters (L) and (R) to help you
distinguish left and right. These letters can be seen on the headband.
Note : The touch sensitive panel is located on the right side.
E GLISH 7
Downloading the Parrot Audio Suite 2 application
Connect to the App StoreSM or Android MarketTM and download the free Parrot Audio
Suite 2 application. This application will allow you to change the settings of the Parrot
Zik 2.0.
Bluetooth® Connection
Before the Parrot Zik 2.0 can be used with your telephone or Bluetooth® audio player,
the two devices must be paired. Once the two devices have detected each other, it is
no longer necessary to pair each time.
1. From your telephone or Bluetooth® audio player, start a search for Bluetooth®
peripherals.
2. Select “WĂƌƌŽƚŝŬϮϬ”.
3. Enter “0000” on your telephone or audio player, if asked to do so. Depending
on your model of telephone, it is possible that a PIN code will not be required.
Once your telephone is paired with the Parrot Zik 2.0, the two devices will connect
to each other automatically each time that the Parrot Zik 2.0 is switched on. It is not
possible to simultaneously connect several devices to the Parrot Zik 2.0.
Note: zŽƵĐĂŶĂĐƟǀĂƚĞĚĞĂĐƟǀĂƚĞƚŚĞĂƵƚŽŵĂƟĐĐŽŶŶĞĐƟŽŶǀŝĂůƵĞƚŽŽƚŚŽĨLJŽƵƌWĂƌ-
ƌŽƚŝŬϮϬƚŽLJŽƵƌƐŵĂƌƚƉŚŽŶĞdŽĚŽƐŽůĂƵŶĐŚƚŚĞWĂƌƌŽƚƵĚŝŽ^ƵŝƚĞϮĂƉƉůŝĐĂƟŽŶĂŶĚ
ƐĞůĞĐƚ^ĞƫŶŐƐхůƵĞƚŽŽƚŚĂƵƚŽͲĐŽŶŶĞĐƟŽŶ.
E GLISH
8
Music
Note : The touch sensitive panel is located on the right side.
Connecting the Parrot Zik 2.0 to the audio source
Connect the Jack to Jack cable supplied to the Parrot Zik 2.0’s right headphone and
connect the other end to your audio player. If your telephone / Bluetooth® audio
player supports Bluetooth® A2DP, you can also send music to your Parrot Zik 2.0 via
Bluetooth®.
Volume
To increase the volume, swipe your finger upward on the touch sensitive panel. To
decrease the volume, swipe your finger downward on the touch sensitive panel.
Next / previous
If your audio player is connected to the Parrot Zik 2.0 via Bluetooth®:
ͻ To return to the previous track, swipe your finger backward on the touch sen-
sitive panel.
ͻ To move to the next track, swipe your finger forward on the touch sensitive
panel.
Pause / Play
To pause the music, take o the headset or tap the touch sensitive panel.
To start playing again, put the headset back on or tap the touch sensitive panel once
more.
E GLISH 9
Parrot Audio Suite 2
Once the Parrot Audio Suite 2 is installed on your smartphone, create an account on
the Parrot Cloud to benefit from all the Parrot Zik 2.0 features:
ͻ activating / deactivating / managing Active noise cancellation ;
ͻ using the Parrot Concert Hall eect, which allows you to simulate a musical
scene ;
ͻ adjust sound frequencies according to your preferences ;
ͻ download presets from your friends or celebrities and link them to tracks,
albums or genres.
E GLISH
10
Telephone
Note : The touch sensitive panel is located on the right side.
Receiving a call
An incoming call is indicated by a ring tone. The name of the caller is announced if his
number is recorded in the phonebook of the phone connected to the Parrot Zik 2.0
and if the Text To Speech setting is defined.
ͻ If you want to accept the call, tap the touch sensitive panel.
ͻ If you want to refuse the call, press and hold the touch sensitive panel for two
seconds.
Note : If you are not wearing the headset or you are taking it o at the moment the call
arrives, it is transferred to your telephone.
Making a call
To make a call using your telephone voice recognition, press and hold the touch sen-
sitive panel for 2 seconds.
Use during a call
To increase the volume during a call, swipe your finger upward on the touch sensitive
panel. To decrease the volume during a call, swipe your finger downward on the touch
sensitive panel. The volume is saved for future calls.
To transfer a call to your telephone, take the Parrot Zik 2.0 o.
To hang up, tap the touch sensitive panel.
Table of contents
Other Parrot Headset manuals
