Motorola HX550 User manual

Motorola Mobility, Inc. and the Stylized M Logo are trademarks or registered
trademarks of Motorola Mobility, Inc. Trademark Holdings, LLC. All other
product or service names are the property of their respective owners.
The Bluetooth trademark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Motorola Mobility, Inc. is under license.
© 2012 Motorola Mobility, Inc. All rights reserved.
68014301110
motorola.com
MOTOROLA HX550

Motorola Mobility, Inc. and the Stylized M Logo are trademarks or registered
trademarks of Motorola Mobility, Inc. Trademark Holdings, LLC. All other
product or service names are the property of their respective owners.
The Bluetooth trademark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Motorola Mobility, Inc. is under license.
© 2012 Motorola Mobility, Inc. All rights reserved.
68014301110
MOTOROLA HX550

1
Figure 1
Figure 2
1
2
3
4
5
6
7
8
9

2
Figure 3

2
1

English
3
Congratulations
Your Motorola HX550 Bluetooth headset delivers everything you need to stay
connected including clear calls, hands-free texting, and custom comfort.
We’ve crammed all of the main features of your headset into this handy
guide, and in a matter of minutes you’ll see how easy your headset is to use.
Your headset
Take a moment to familiarise yourself with your new Bluetooth headset.
See figure 1 on page 1.
1Ear hook
2Micro-USB charging connector
3Microphone
4Call button
5Volume button (on side)
6Status light (on side)
7Boom
8Microphone
9Ear speaker

English
4
Charge it
See figure 2 on page 1.
Charge your headset before using it. Headset is not functional while charging.
Status light
Red/Yellow = charging
Green = fully charged
Note: Your battery is designed to last the life of your product. It should only
be removed by a recycling facility. Any attempt to remove or replace your
battery will damage your headset.
A few essentials to get you started
Turn on & off
To turn headset on: flip the boom to the open/extended position
To turn headset off: flip the boom to the closed/folded position
Change voice interface setting
Your headset supports English voice prompts by default.
You can select a different language or turn the voice interface off through
the settings menu: press and hold the Call button while turning on the
headset and follow the voice prompts to make changes.
Note: other features can be changed or turned on/off in the settings menu:
• Caller ID
• Multipoint (two phone) connections
• WBS (Wide-band Audio) on/off
• Reset to factory default
Caution: This action erases all pairing information stored in your headset.

English
5
Wear it
You can optimise the fit of your headset with the on-ear hook, in-ear hook or
ear gels with no hook.
See figures 3 on page 2.
1 On-ear hook
• Rotate and turn the on-ear hook for left or right use.
• Look the hook over your ear, and point the headset microphone towards
your mouth.
2 In-ear hook
• Rotate and turn the on-ear hook for left or right use.
• Fit in-ear hook onto earpiece.
• Loop the hook over your ear, and point the headset microphone towards
your mouth.
 Ear gel
• Remove on-ear hook from headset.
• Fit the ear gel on the ear piece and place it on your ear by placing the loop
in the bend of your ear.

English
6
Pair & connect
Pair & connect with your phone
1Turn off any Bluetooth devices previously paired with your headset.
2Turn on the Bluetooth feature on your phone.
3Turn on your headset and put it on your ear.
The indicator light becomes steadily lit in blue and you hear “Welcome to
the Motorola HX550. Ready to pair”.
4 Follow the voice prompts to connect your phone to your headset.
Note: If prompted for the passkey, enter 0000.
When your headset successfully pairs with your phone, you hear “pairing
complete”. When connected, you hear “phone 1 connected” and the
indicator light rapidly flashes blue and purple.
Pairing with voice prompts turned off
Follow pairing instructions until step 3, then:
• go to the Bluetooth menu on your phone and look for devices.
• select MOTOROLA HX550.
When your headset successfully pairs with your phone, the indicator light
flashes purple and blue and you hear 2 ascending tones.
Pair & connect a second phone (Optional)
1Turn off first phone and any other Bluetooth devices previously paired
with your headset.
2Turn your headset off.
3Turn on the Bluetooth feature on your phone.

English
7
4Turn on your headset and put it on your ear.
The indicator light becomes steadily lit in blue and you hear “ready to
pair”.
5 Follow the voice prompts to connect your phone to your headset.
When your headset successfully pairs with your phone, you hear“pairing
complete”. When connected, you hear“phone 1 connected” and the
indicator light rapidly flashes in blue and purple.
To connect to both phones, simply turn on the first phone while the second
phone is connected. When you hear “phone 2 connected”, your headset is
connected to both phones. The last paired phone (your second phone) is
now your primary phone (or “phone 1”) for voice dial functionality.
Tip: You have 20 seconds to turn on your first phone. If reconnection fails,
turn your headset off and on.
Pairing with voice prompts turned off
Follow pairing instructions until step 4, then:
• go to the Bluetooth menu on your phone and look for devices.
• select MOTOROLA HX550.
To connect to both phones, simply turn on the first phone while the second
phone is connected. When you hear 2 ascending tones, your headset is
connected to both phones.
Test your connection
Place the headset on your ear and make a call from the phone(s). If your
phone(s) and headset are successfully connected, you hear ringing in
the headset. For daily use, make sure your headset is turned on, and your
phone’s Bluetooth feature is on. Your headset and phone will connect
automatically!