Patton electronics G.SHDSL NTU User manual

G.SHDSL NTU
User Manual
Version 0.03

G.SHDSL NTU User Manual V0.03 1
Tables of Contents
1 INTRODUCTION ................................................................................................................................................ 4
1.1 M ODELS ............................................................................................................................................................. 4
1.1.1 E1 interface model ................................................................................................................................... 4
1.1.2 Serial (V.35) interface model ................................................................................................................... 4
1.1.3 Ethernet interface model ......................................................................................................................... 4
1.1.4 Multi-interfaces model ............................................................................................................................ 4
1. F EATURES ........................................................................................................................................................... 5
1.3 S PECIFICATION ..................................................................................................................................................... 5
1.4 A PPLICATIONS ...................................................................................................................................................... 8
2 GETTING TO KNOW ABOUT THE SHDSL NTU ..................................................................................................... 9
.1 F RONT P ANEL ...................................................................................................................................................... 9
2.1.1 E1 interface model ................................................................................................................................... 9
2.1.2 Serial interface model .............................................................................................................................. 9
2.1.3 Ethernet interface model ......................................................................................................................... 9
2.1.4 Multi-interfaces model .......................................................................................................................... 10
. R EAR P ANEL ...................................................................................................................................................... 1
2.2.1 E1 nterface Model ................................................................................................................................. 12
2.2.2 Serial (V.35) nterface Model ................................................................................................................. 13
2.2.3 Ethernet nterface Model ....................................................................................................................... 14
2.2.4 Multi-interfaces Model .......................................................................................................................... 15
.3 I NSTALLATION .................................................................................................................................................... 16
2.3.1 For E1 nterface ...................................................................................................................................... 17
2.3.2 For Serial nterface ................................................................................................................................. 18
2.3.3 For Ethernet nterface ............................................................................................................................ 19
3 CONFIGURATION WITH KEYPAD AND LCD ...................................................................................................... 21
3.1 K EY P ADS .......................................................................................................................................................... 1
3. M AIN MENU T REE ..............................................................................................................................................
3.3 M ENU TREE FOR [SHOW STATUS] ...................................................................................................................... 4
3.4 M ENU TREE FOR [SHOW STATISTICS] ................................................................................................................. 8
3.5 M ENU TREE FOR [SYSTEM SETUP] ...................................................................................................................... 31
3.5.1 Sub-Menu tree for SETUP E1 nterface .................................................................................................. 35
3.5.2 Sub-Menu tree for SETUP SER ES nterface ............................................................................................ 39
3.5.3 Sub-Menu tree for SETUP Ethernet nterface ........................................................................................ 42
3.5.4 Application of Multi-interfaces .............................................................................................................. 43
3.6 M ENU TREE FOR [REBOOT SYSTEM] ................................................................................................................... 49
3.7 M ENU TREE FOR [SYSTEM DISGNOSTIC] ............................................................................................................ 50
3.7.1 Loopback Test ........................................................................................................................................ 52

G.SHDSL NTU User Manual V0.03
3.7.2
BER Test ................................................................................................................................................. 55
3.8 P ARAMETERS T ABLE ............................................................................................................................................ 56
3.8.1 E1 nterface Model ................................................................................................................................. 56
3.8.2 Serial nterface Model ............................................................................................................................ 56
3.8.3 Ethernet nterface model ....................................................................................................................... 57
3.8.4 Multi-interface model--E1 nterface ...................................................................................................... 57
3.8.5 Multi-interface model--Serial nterface ................................................................................................. 58
3.8.6 Multi-interface model--Ethernet nterface ............................................................................................ 58
3.8.7 Multi-interface model--E1+Serial nterface ........................................................................................... 59
3.8.8 Multi-interface model--E1+Ethernet nterface ...................................................................................... 60
4 CONFIGURATION WITH CONSOLE PORT ......................................................................................................... 61
4.1 L OGIN P ROCEDURE ............................................................................................................................................. 61
4. W INDOW STRUCTURE .......................................................................................................................................... 63
4.3 M ENU C OMMANDS ............................................................................................................................................ 64
4.4 M AIN M ENU S UMMARY ...................................................................................................................................... 65
4.5 [S ETUP ] C ONFIGURATION ..................................................................................................................................... 66
4.5.1 Configure nterface ................................................................................................................................ 70
4.5.2 Configure SHDSL parameters ................................................................................................................. 72
4.5.3 Configure E1 parameters ....................................................................................................................... 78
4.5.4 Configure Serial parameters .................................................................................................................. 86
4.5.5 Configure Ethernet parameters ............................................................................................................. 94
4.5.6 Enable and Disable Remote configuration ............................................................................................. 98
4.5.7 Restore factory default setting .............................................................................................................. 99
4.6 [S TATUS ] V IEW THE SYSTEM STATUS ..................................................................................................................... 101
4.6.1 Show SHDSL Status .............................................................................................................................. 102
4.6.2 Show nterface Status .......................................................................................................................... 104
4.6.3 Show Current Performance .................................................................................................................. 105
4.6.4 View the Local and remote Statistics ................................................................................................... 106
4.6.5 Clear Channel Statistics........................................................................................................................ 111
4.7 [S HOW ] V IEW S YSTEM C ONFIGURATION ............................................................................................................... 11
4.7.1 Show general nterface ........................................................................................................................ 112
4.7.2 Show configuration in listing format ................................................................................................... 114
4.7.3 Show configuration in command script ............................................................................................... 117
4.8 [R EBOOT ] R EBOOT THE SYSTEM ........................................................................................................................... 1 0
4.9 [D IAG ] D IAGNOSTIC – L OOPBACK AND BER T EST ................................................................................................... 1 1
4.9.1 Loopback test ....................................................................................................................................... 122
4.9.2 BER Test ............................................................................................................................................... 123
4.10 [U PGRADE ] FIRMWARE UPGRADE ........................................................................................................................ 1 5
4.11 [E XIT ] E XIT THE SYSTEM ..................................................................................................................................... 130
5 APPENDIX ..................................................................................................................................................... 132

G.SHDSL NTU User Manual V0.03 3
5.1
A BBREVIATION ................................................................................................................................................. 13
5. S ERIAL I NTERFACE P IN A SSIGNMENTS ................................................................................................................... 135
5.3 V.35 DB 5(M) TO M.34(F) ADAPTOR C ABLE ...................................................................................................... 137
5.4 X. 1 DB 5(M) TO DB15(F) ADAPTOR C ABLE ...................................................................................................... 139
5.5 C ONSOLE C ABLE ............................................................................................................................................... 141
5.6 E1 B ALANCE C ABLE ........................................................................................................................................... 143
5.7 E1 U NBALANCE C ABLE ...................................................................................................................................... 144
5.8 E THERNET C ABLE .............................................................................................................................................. 145
5.9 DSL C ABLE ...................................................................................................................................................... 146
5.10 P OWER C ORD .................................................................................................................................................. 147
5.11 I LLUSTRATION OF L OOPBACK CONNECTION DEVICE (E1) ........................................................................................... 148
5.1 I LLUSTRATION OF L OOPBACK CONNECTION DEVICE (S ERIAL ) ...................................................................................... 149

G.SHDSL NTU User Manual V0.03 4
1 Introduction
1.1 Models
The G.SHDSL NTU offers three different interfaces (E1, Serial and Ethernet) connected customers to high-speed TDM
services .This series have four models on the following:-
1.1.1 E1 interface model
It offers two different ways have connected customers to high-speed TDM services with two G.703 E1 interfaces
(Balance 1 0Ω RJ45 jack and Unbalance 75Ω dual BNCs). The G.703 interface can carry 64kbps to .048Mbps.
1.1.2 Serial (V.35) interface model
It offers customers premises has high-speed TDM services with a DB 5 interface. The industry standard DB 5
interface can be configured as a V.35/RS530 or V.36/X. 1 connection. The DB 5 connection can transfers data up to
.304Mbps.
1.1.3 Ethernet interface model
It offers customers premises has high-speed TDM services with a LAN interface. The industry standard LAN interface
can detect a 10Mbps or 100Mbps connection automatically.
1.1.4 Multi-interfaces model
It offers customers premises have three types interface: E1 interface (balanced 1 0Ω RJ48C jack and unbalanced
75Ω dual BNCs), V.35 interface (DB 5 female connector) and Ethernet interface (RJ-45 connector). You can select
five type interfaces according to your application: (a) E1 interface only, (b) Series interface only, (c) Ethernet
interface only , (d) E1 and Serial interface come together and (e) E1 and Ethernet interface come together.

G.SHDSL NTU User Manual V0.03 5
They can be configured and managed via EOC, or menu-driven VT100 compatible Asynchronous Terminal Interface,
either locally or remotely.
The G.SHDSL NTU is equipped with an auto rate capability that identifies the maximum line rate supported by the
copper loop. This powerful automatic configuration capability makes installation and service provisioning simple and
painless. Further flexibility is provided in the ability to manually set the maximum NTU speed at different levels for
different customer-tailored service offerings.
1.2 Features
 Standard G.SHDSL (ITU G.991. ) supports improved reach/speed and greater interoperability
 Fast and cost-effective provisioning of traditional frame relay (FR or T-HDLC) or TDM leased line services
 User existing copper loop infrastructures
 Can operate back to back connection
 Efficient single wire pair usage
 Up to .31 Mbps symmetric service bit rate
 Auto rate installation maximizes data rate based on loop conditions
 Auto configuration wetting current to protect SHDSL line
 Local management interface with LCD display
 Remote line loopback
 SHDSL Line performance monitoring (Data Rate and SNR)
 Raw and per time interval statistics
 Bandwidth guaranteed transmission equipment
 Remote firmware upgrade
1.3 S ecification
WAN In erface
• Line Rate: SHDSL per G.991.
• Coding: trellis coded pulse amplitude modulation (TCPAM-16)
• Support: Annex A(ANSI) and Annex B(ETSI)
• Payload rates: 64kbps to .304Mbps (N x 64kbps N=1 to 36) for Serial and Ethernet interface
64kbps to .048Mbps (N x 64kbps N=1 to 3 ) for E1 interface
• Connection: RJ-45 jack ( -wire or 4-wire)
• Impedance: 135 ohms
G.703 In erface (as E1)
• Connection: RJ-45 for balanced 1 0Ω E1 cable

G.SHDSL NTU User Manual V0.03 6
• Connection: BNC for unbalanced 75Ω E1 cable
• Line Rate: 048KHz +/- 50ppm
• Framing: PCM30/30C/31/31C and Unframed
• Data Rate: 64Kbps to .048Mbps (Nx64Kbps , N=1 to 3 )
• Operation: Full E1 and Fractional E1
SERIAL In erface (as V.35)
• Connection:DB- 5(F)
• Payload rates: Up to .304Mbps (N=1 to 36)
• Support RS-530, V.35 or V.36/X. 1
LAN In erface (as E herne )
• Single Ethernet Interface
• 10/100Mpbs Half/Full Duplex, Auto-sensing, Auto-Crossover
• Up to 048 MAC address learning
DSL Timing
• Internal
• From E1 Recovery (as E1)
• From DTE (as V.35 and Ethernet)
Performance Moni oring
• ES, SES, UAS, LOSW, Alarms, Errors
Loopback Tes s (for E1 and V.35 interface only)
• Digital Local Loopback
• Digital Loopback
• Remote Line Loopback
• Remote Payload Loopback
• Far-end Line Loopback
• Far-end Payload Loopback
• V.54(For V.35 interface only)
• Build-in 047 bit (
11
-1) BER tester
Managemen
• Configuration with keypads and LCD display
• Console port (RJ45)
• Support firmware upgradeable
Physical/Elec rical
• Dimensions: 19.8 x 4.6 x 16.8 cm

G.SHDSL NTU User Manual V0.03 7
• Input: For AC power input version 90~ 40VAC with 50~60Hz
For DC Power input version -48VDC
• Power Consumption: 10W Max
• Operation temperature: 0 to 50°C
• Humidity: Up to 95% (non-condensing)
• External screw for frame grounding

G.SHDSL NTU User Manual V0.03 8
1.4 A lications

G.SHDSL NTU User Manual V0.03 9
2 Getting to know about the SHDSL NTU
This chapter shows the front and rear panel and how to install the hardware.
2.1 Front Panel
2.1.1 E1 interface model
2.1.2 Serial interface model
2.1.3 Ethernet interface model

G.SHDSL NTU User Manual V0.03 10
2.1.4 Multi-interfaces model
Front panel can be separated into three parts: LCD display, LED indicator and Keypads.
The LCD display can show the status and configuration of device. The local management interface will be done by
keypads with this LCD display.
The purpose of key pads is to configure the setting or selecting of function on this SHDSL NTU.
The following table describes the LEDs’ function of device.
LED Color Action Description
PWR Green
On Power is on.
Off Power is off.
ALM Red
On System loss.
Off System is working nomarally.
TST Yellow
On System is testing for connection.
Off System is working nomarlly.
DSL
SYN Green
On SHDSL line is connected.
Blink Data transmit in SHDSL line.
Off SHDSL line is dropped.
ERR Red
Blink Error second occurs.
Off No error second.
LPB Yellow
On Loopback is on.
Off Loopback is off.
E1
SYN Green
On E1 line is connected.
Off E1 line is dropped.
ERR Red
Blink There are error seconds.
Off There is not any error second.
LPB Yellow
On Loopback is on.
Off Loopback is off.

G.SHDSL NTU User Manual V0.03 11
Serial
TD Green
On Data transmit in V.35.
Off No data transmit in V.35.
RD Green
On Data receive in V.35.
Off No data reveive in V.35.
ERR Red
Blink Error second occurs.
Off No error second.
ETH
LINK Green
On Data transmit in Ethernet.
Off No data transmit in Ethernet.
100M Green
On Data receive in 100M.
Off No data receive in 100M.
COL Red
Blink Error collision occurs.
Off No error collision.
E1
Green
Blink E1 Data tramsmit and receive
On E1 cable cable connected
Red On No E1 cable connected
Mode
SER
Green
Blink Serial Data tramsmit and receive
On DTE Connected
Red On DTE Disconnect
ETH
Green
Blink Ethernet Data tramsmit and receive
On Ethernet cable connected
Red On No Ethernet cable connected

G.SHDSL NTU User Manual V0.03 1
2.2 Rear Panel
2.2.1 E1 Interface Model
AC power inpu version
The rear panel of this model is including power switch, AC power socket, RJ-45 console, G.703 RJ-48C jack or BNC
jack for transmitting and receiving and RJ-45 for SHDSL from left to right.
DC power inpu version
The rear panel of this model is including power switch, DC power socket, RJ-45 console, G.703 RJ-48C jack or BNC
jack for transmitting and receiving and RJ-45 for SHDSL from left to right.
Connector Description
ON Power switch. Press 1 for turn on and press 0 for off
90~ 40V AC IEC-3 0 C6 AC input connector. It has power adapting function from 90V to
40V
-48V GND DC power input connector (-48V)
CONSOLE RJ-45 for system configuration and maintenance
G.703 RJ-48C for 1
0Ω E1 connection with PABX (Private Automatic Branch Exchange)
or E1 Router
TX BNC for 75Ω E1 transmitting
RX BNC for 75Ω E1 receiving
SHDSL RJ-45 for DSL connection

G.SHDSL NTU User Manual V0.03 13
2.2.2 Serial (V.35) Interface Model
AC power inpu version
The rear panel of this model is including power switch, AC power socket, RJ-45 for console cable, DB- 5(Female) for
serial and RJ-45 for SHDSL from left to right.
DC power inpu version
The rear panel of this model is including power switch, DC power socket, RJ-45 for console cable, DB- 5(Female) for
serial and RJ-45 for SHDSL from left to right.
Connector Description
ON Power switch. Press 1 for turn on and press 0 for off.
90~ 40V AC IEC-3 0 C6 AC input connector. It has power adapting function from 90V to
40V
-48V GND DC power input connector (-48V)
CONSOLE RJ-45 for system configuration and maintenance
SERIAL DB- 5(F) for RS-530 and V.35 or X. 1(with adaptor cable)
SHDSL RJ-45 for DSL Connection

G.SHDSL NTU User Manual V0.03 14
2.2.3 Ethernet Interface Model
AC power inpu version
The rear panel of this model is including power switch, AC power socket, RJ-45 for console cable, LAN for Ethernet
cable and RJ-45 for SHDSL from left to right.
DC power inpu version
The rear panel of this model is including power switch, DC power socket, RJ-45 for console cable, LAN for Ethernet
cable and RJ-45 for SHDSL from left to right.
Connector Description
ON Power switch. Press 1 for turn on and press 0 for turn off.
90~ 40V AC IEC-3 0 C6 AC input connector. It has power adapting function from 90V to
40V.
-48V GND DC power input connector (-48V)
CONSOLE RJ-45 for system configuration and maintenance.
ETH RJ-45 LAN port for Ethernet cable
SHDSL RJ-45 for DSL Connection

G.SHDSL NTU User Manual V0.03 15
2.2.4 Multi-interfaces Model
DC power inpu version
The rear panel of this model is including power switch, AC power socket, RJ-45 for console cable, LAN for Ethernet
cable, G.703 RJ-48C or BNC jacks for transmitting and receiving, DB- 5(Female) for serial and RJ-45 for SHDSL from
left to right.
DC power inpu version
The rear panel of this model is including power switch, DC power socket, RJ-45 for console cable, LAN for Ethernet
cable, G.703 RJ-48C or BNC jacks for transmitting and receiving, DB- 5(Female) for serial and RJ-45 for SHDSL from
left to right.
Connector Description
ON Power switch. Press 1 for turn on and press 0 for off
90~ 40V AC IEC-3 0 C6 AC input connector. It has power adapting function from 90V to
40V
-48V GND DC power input connector (-48V)
CONSOLE RJ-45 for system configuration and maintenance
ETH RJ-45 LAN port for Ethernet cable
E1
RJ-48C
for 1 0Ω E1 connection with PABX (Private Automatic Branch Exchange)
or E1 Router
SERIAL DB- 5(F) for RS-530 and V.35 or X. 1(with adaptor cable)
TX BNC for 75Ω E1 transmitting
RX BNC for 75Ω E1 receiving
DSL RJ-45 for DSL connection

G.SHDSL NTU User Manual V0.03 16
2.3 Installation
Note: To avoid possible damage to this router, do not turn on the product before hardware installation.
 Plug the power cord in the power socket.
 Plug the console port in console if you want to configure the NTU with VT100 program of NB or PC.
 Plug the E1 cable (Either 75Ω BNC cables or 1 0Ω cable) / SERIAL cable / Ethernet cable
 Plug SHDSL cable
 Power on
Model Interface modes support
E1 interface model E1 interface
V.35 interface model V.35 interface
Ethernet interface model Ethernet interface
Multi-interfaces model E1 interface
V.35 interface
Ethernet interface
E1+V.35 interface
E1+Ethernet interface
Only the Multi-interfaces model can support all five type interfaces.

G.SHDSL NTU User Manual V0.03 17
2.3.1 For E1 Interface
AC power inpu version
DC power inpu version

G.SHDSL NTU User Manual V0.03 18
2.3.2 For Serial Interface
AC power inpu version
DC power inpu version

G.SHDSL NTU User Manual V0.03 19
2.3.3 For Ethernet Interface
AC power inpu version
DC power inpu version