PBX LIGHTWALL PBSK206 User manual

PBSK206
LIGHTWALL
Wireless Lightbox Speaker
Instruction Manual

Before You Begin
In the Box
• PBSK206 - Lightbox Speaker (x1)
• Tiles (x104)
• Micro-USB Charging Cable (x1)
• User Manual (x1)
Caution
READ CAREFULLY AND KEEP THIS MANUAL
• THIS DEVICE IS NOT A TOY, do NOT allow children or pets to use or
play with this device.
• Do not disassemble, modify, or repair the device.
• Do not expose the unit to extreme temperatures (heat or cold), open
flames, humid, or wet conditions.
• Do not submerge in water.
• Low power may cause poor Bluetooth connection or sound distortion.
• Do not overcharge battery.
• If using with a USB adapter, make sure the adapter is not damaged.
• Do not allow the USB port or the connectors of the supplied USB cable to
be exposed to dust, or water, or come into contact with any conductive
materials such as liquids, metallic powders, etc.
• This device contains a built-in battery and should not be disposed of with
regular household waste. Please consult the local authorities on the
correct way to dispose of this device.

Getting Started
Location of Controls
On Off
1 2 3
4 5
1. [ ] Button:
Cycle through light modes
2. Micro-USB Charging Port
3. Charging LED Indicator
4. [POWER] Switch
5. Bluetooth LED Indicator

Charging the Speaker
Insert the small connector of the supplied micro-USB cable into the
micro-USB charging port on the side of the speaker.
Insert the large connector into a USB power source, such as the USB port on
a computer or a 5V USB power adapter (not included).
The LED indicator will turn RED while charging and turn OFF when fully
charged.

Powering ON/OFF
• Slide the [POWER] switch to the ON position to power the speaker on. A
tone will be heard and the speaker will enter Bluetooth pairing mode or
re-pair to a previously-paired device.
• Slide the [POWER] switch to the OFF position to power the speaker OFF.
Using the Lights
• Press the [ ] button to cycle through the speaker light modes.
Pairing the Speaker (Bluetooth)
1. Turn the speaker on by moving the [POWER] switch to the ON position. A
tone will be heard and the Bluetooth LED indicator will quickly flash
BLUE.
2. Set your mobile device to search for new Bluetooth devices. When it
appears, select PBSK206 from the list of found devices.
3. Once successfully paired, a tone will be heard and the Bluetooth LED
indicator will slowly flash BLUE.

Compliance Information
FCC Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modifications not expressly approved could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
WARNING Li-ion Battery Inside
This product is fitted with a Li-ion battery. Do not damage, open, or dismantle the battery and do not use it in
damp and/or corrosive conditions. Use only with compatible chargers. Never dispose of batteries in a fire,
and never expose them to high temperatures. Do not expose the product to temperatures exceeding 60°C
(140°F).
Direct current symbol.
This symbol signifies the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling. Proper disposal
and recycling helps protect natural resources, human health and the environment.
This symbol signifies and declares that this equipment has battery charging which
complies with California CEC and energy efficiency.
This symbol signifies that this is a wireless device powered by Bluetooth® technology.
This symbol represents FCC Declaration of Conformity and compliance.
Rating Label
Denitions

Warranty Information
90-Day Limited Warranty
Territory: United States/Canada
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product as supplied and distributed new by an authorized retailer is warranted by Southern Telecom, Inc. to the
original consumer purchaser against defects in materials and workmanship (“Warranty”) as follows:
To obtain warranty service:
• Visit our customer support portal: www.customersupport123.com
• Select the brand and model of your device
• Select “Service Request” and fill out the form to begin your inquiry
• Exchanges require dated proof of purchase from an authorized retailer
Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by
the service center determines this product is defective. Products received damaged as a result of shipping will require
you to file a claim with the carrier.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack
of reasonable care, unauthorized modification including software modifications such as the installation of custom
firmware. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All
products being returned to the authorized service center for repair must be suitably packaged.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE
EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER
THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY
ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR.
REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE
DISCRETION - ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS
MANUFACTURERS BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUEN-
TIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA
OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN,
NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY
AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR.
THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED
THE PRODUCT AND IS NOT TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or
allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty gives you specific legal
rights, and you may have other rights that vary from state to state or province to province. Contact your authorized
retailer to determine if another warranty applies.

Designed in US
Printed in China
v1. 12-2021
PBX® is a registered trademark of PBX® Holdings, LLC.
All other trademarks and trade names are those of their respective owners.
All product names, trademarks, and registered trademarks are property of their
respective owners. All company, product, and service names used in this
document are for identification purposes only. Use of these names, trademarks,
and brands does not imply endorsement.