doping S9 User manual

3510007- 1 -
Thank you for your purchase
USER MANUAL
GENERAL SAFETY RULES
- Before using this product carefully read this instruction and retain it in a safe place together with
the sales receipt, free service requisition form and, if possible, the wrapping.
- Use the device for the designated purposes only and in a manner indicated in the instruction.
The device is designated for domestic use, not for commercial purposes.
- Do not use the device in the rain, in humid places or near water. Do not expose the device to
dust, heat, direct sunlight, high humidity (never put the device into water or other liquids) and
sharp strokes. Do not touch the device with wet hands.
- Check the device regularly. If you notice any visible defects, contact an authorised service
centre for repairs.
ATTENTION! For safety reasons, do not let children play with the device or packaging
materials (lm, foam, cardboard, etc.). Hazard of choking and suffocation!
DESCRIPTION
Portable sound system. Bluetooth to connect with smartphone. Provides music streaming and
mp3 le playback from smartphone and external memory drives. 2 microphones with sound
effects and voice changer. Voice recording function. Built-in colored LED party lights.
Included in the kit are:
• DOPING S9
• Charging cable USB-A/microB
• 2 microphones
• Operating manual
FUNCTIONS
- Sound system is equipped with USB ash memory, linear input/output 3.5 mm and 3.5 mm
microphone sockets.
- Reads USB ash memory (Flash) records in MP3 format.
- Track memorising function.
- After restarting renews composition.
- Lithium battery ensures independent use of the device.
- Stylish and attractive design, LED lighting with rhythmic colour effects.
- Particularly durable, drop-resistant frame.
PORTABLE SOUND SYSTEMEN

3510007- 2 -
9
614
10 11 1312 15148
2
3
5
7
Control panel
PREPARATION (See component numbers on the picture)
Unpacking
- Take the device out of packing.
- Take off all the packing materials and bracings.
Charging the battery
- Add the cable plug found in the set to jack DC 5V (9), add the other cable USB plug to jack of
the computer or adapter, a red charging mode indicator will light up (10).
When indicator turns off, battery is charged.
Charging adapter in USB output shall be 5V±10%. Charge the battery for 3-4 hours.
NOTE: If the device is powered on at the time of charging, the time of charging is longer.
USING THE DEVICE
Switching on:
To turn the device on, set the main LIGHT-ON-OFF switch (8) to position ON.
Volume control:
By turning the button of volume regulator (1) you can change the level of volume.
MP3 (digital) le playback:
1. Insert USB ash memory with MP3 records in the appropriate socket.
IMPORTANT: For the memory card to function normally, before switching on the device using
the switch LIGHT-ON-OFF (8) in position ON, make sure USB ash memory is inserted.
During the device operation, do not remove and insert USB ash memory. To do this, the
device must be switched off using the switch LIGHT-ON-OFF (8) in position OFF. If USB
ash memory will be inserted or removed from an operating device, information or/and
equipment damages are possible!
EN

3510007- 3 -
2. Turn on the device by using LIGHT-ON-OFF (8) switch. MP3 playback will begin.
- If you have previously used another mode (''bLUE'', ''AUH''), press [Mode] (2) to select the
MP3 mode.
- Press [ ] (6) if you wish to turn on the Pause mode - playback will be stopped.
- If you press the button [ ] (6) again, playback will be resumed from where it was stopped.
- Selecting the next or previous track:
Briey press [] (7).
Briey press [] (5).
3. After listening to recordings, press [ ] (6).
4. Turn the device off by moving the main switch LIGHT-ON-OFF (8) to position OFF.
5. Remove ash memory.
Choosing repetition/play mode
By pressing the key [Rep] (3) you can select one of the following modes:
*: repeats one composition.
**: plays all compositions.
Playback of the analogue signal from external source:
1. Put in the cable plug found in the set in the 3.5mm jack AUX IN (13), put the other cable
plug in the source (for example, smartphone, tablet PC, MP3/MP4 player, etc.) LINE OUT or
earphone jack.
2. Switch on the device and with the button [Mode] (2) choose the mode "Line in".
3. Adjust volume.
Bluetooth wireless connection:
NOTES:
• Bluetooth is a technology that uses radio waves to wirelessly connect devices located
within a close range of each other.
• Since there are many different manufacturers, models and software versions, complete
functionality cannot be guaranteed.
Device pairing
a. Make sure that the Bluetooth function is activated on your mobile device (e.g.
smartphone).
To do this, refer to your mobile device's manual.
b. Turn on the device by using the LIGHT-ON-OFF (8) switch.
c. Press the [Mode] button (2). Turn on Bluetooth mode "Bluetooth mode".
Sound system is now attempting to connect to the device with which it was previously
paired. If sound system nds the paired device, a signal will sound. If the paired device is
not found, sound system is ready to be paired with another device.
d. Find the Bluetooth menu on your mobile device and register the device on your mobile
device. To do this, refer to your mobile device's manual. Information should appear on your
mobile device’s display regarding the paired device (BT ID) with the name "DOPING_S9".
EN

3510007- 4 -
e. If password is requested, enter "0000" (or another depending on the model or software
version of you mobile device).
INFO: Use the mobile device's controls to select the piece and play mode and set the start
volume (see the mobile device’s user manual). You can adjust the volume with the volume
regulator of the sound system (1).
3. Re-Connecting via Bluetooth
a. Activate the Bluetooth feature on your mobile device.
b. Turn on the sound system and choose the mode "bLUE".
c. If your mobile device was paired only with the sound system, connection will take place
automatically. If your mobile device was paired with several other devices, connection with
the sound system will have to be made manually.
NOTES:
• Depending on the playback device manufacturer, re-registration may be required
(PAIRING).
• If you experience any problems connecting to the device, deactivate WiFi and mobile data
features on your device.
• Bluetooth compatibility cannot be guaranteed for devices (e.g. mobile phones), which will
be produced in the future.
• To ensure optimum connection, make sure your device's battery is fully charged.
• Some mobile devices have a power-saving mode. Deactivate the power-saving mode, as
it may cause problems in the transmission of data in the Bluetooth mode.
Connecting a microphone:
1. Turn off the device.
2. Turn the volume control (1) to minimum.
3. Plug into the microphone socket MIC 1 (15) or/and MIC 2 (14) 3.5 mm plug of the dynamic
microphone.
IMPORTANT: Move the dynamic microphone switch to the ON position.
4. Turn on the device by using the LIGHT-ON-OFF switch (8).
5. Speak into the microphone and set the necessary volume level with the control regulator (1).
Karaoke function:
To use the karaoke function, you must rst connect the microphone, as described under
"Connecting a microphone" and insert a USB ash drive with pre-recorded music (you can also
use a mobile device with a Bluetooth connection or another external music player, which is
connected to the socket AUX IN (13), as a music source).
1. Turn on the device by using the LIGHT-ON-OFF switch (8).
2. Press [Mode] button (2) to select the MP3 music source.
3. Adjust the volume level of music and microphone. When using Bluetooth or AUX "Line in"
mode, also adjust volume on your mobile device or external player.
EN

3510007- 5 -
Lighting effects:
Front panel of the device may be lit with multicoloured LED diodes.
These light effects may be switched on by sliding the switch LIGHT-ON-OFF (8) in position
LIGHT.
Microphone effects
By temporarily pressing the microphone key , you can play any of the 12 (6+6) microphone
effects.
By pressing the key  for 2 seconds, you can choose the next effect.
Voice changer
By pressing the microphone key VOICE CHANGER you can change your voice to modes "OLD
MAN"  "MONSTER"  "WOMAN" "REAL VOICE"
Echo effect
By pressing the front panel key [Mode] (2) for 2 seconds, you can switch on/change the degree
of echo effect.
Recording from microphone to USB ash drive
• The maximum length of the recorded material depends on the capacity of the memory device.
• Records will be saved in the JL_REC folder.
1. Turn off the sound system with the switch LIGHT-ON-OFF (8).
2. Insert the USB ash drive into the USB socket (11).
3. Turn the main volume control VOLUME (1) to the minimum.
4. Move the microphone switch to the ON position.
4.1 Insert the microphone jack into the MIC1 (15) socket (1) or/and MIC2 (14).
5. Turn on the sound system with the switch LIGHT-ON-OFF (8).
6. Press the [Rec](4) key.
7. Speak into the microphone and set the desired sound level with the control VOLUME (1).
8. To nish recording, briey press the [Rec](4) key. The record will be saved on the ash drive.
• If the recording fails, make sure that the ash drive still has a free space.
Playback of the microphone recordings
After completion of the recording, the last recording will be played automatically. If you want to
play other microphone records, press the key [] (7).
To exit the microphone recording mode, briey press the [Rec](4) key.
PROVISIONS FOR PROPER USE
This is a complex device and it must be treated carefully. For device to serve for a long time and
trustworthy, please take into consideration the following:
1. Do not place the device in a very hot place (over 40˚C). In heat, electronic devices and
batteries damage faster and plastic details can even become deformed.
2. make sure the device is not in contact with water and any other liquids.
3. Do not draw the device near powerful sources of electric eld and static electricity.
4. Do not arbitrarily open the device and repair it.
EN

3510007- 6 -
5. Do not insert non-standard, unqualied or broken spare parts, accessories, batteries in the
device.
6. If the device is brought from cold into a warm room, do not switch it on, but allow dewy details
to get dry for approximately two hours.
7. Do not allow unqualied persons to open the device.
8. Protect the device from blows, falls and powerful vibrations.
9. If the device has got wet, switch it off, wipe it and let it dry for at least 24 hours in a warm place.
CLEANING
Clean the device with soft, dry or slightly wet cloth, use no solvents (petrol, acetone, spirit etc.)
for cleaning.
Do not use any abrasive or caustic cleaning agents. After cleaning, carefully dry the device.
Technical data
Inputs/outputs: USB ash card socket,
dynamic microphone 3,5mm input (x2),
linear 3.5mm output and input,
Wireless connectivity: Bluetooth V5.0
Speaker: 4" (102mm), 2Ω
Output power: 12W
Playback freq. range: 90Hz - 20kHz
Signal/noise ratio: >60dB
Charging power supply: 5V, 1A, direct current (USB)
Battery: Li-ion 3.7V, 2400mAh
Battery charging time: approximately 4 hours
Battery operation time*: to 8 hours
Playback le format: MP3/FLAC/WMA/WAV
Temperature of environment: 0˚C to 40˚C
Relative humidity of environment: 20% - 90%
Size: 287x 292 x 132mm
Weight: 1,15kg
*measurement done by 33% volume, with the LIGHT-ON-OFF switch (4) in position ON and the
result is approximate (depends on ash construction and recording content).
Technical changes are possible.
Let’s conserve the environment! Don’t trash this device together with other garbage,
but bring it to the ofcial recycling collection point.
Duplication of this instruction for commercial purposes is not allowed.
EN