PC-Pen T20 User manual

深圳市斯达特科技有限公司
Shenzhen PC-PEN Co.Ltd
Tel:[phone] Fax:[phone]
Addu:12A01 Leizhen Building Funimg Rd,Shenzhen China
1. Run Starter pen Driver
Insert the starter pen Driver into your DVD/CD-ROM
Run “Setup .exe” from CD-ROM to install the driver and follow the steps on the
screen until finish.
2. Plug the USB cable into the USB port of your computer.
When you plug the USB cable ,an icon as follow will appear at the right corner of
the computer screen to indicate the pen working mode:
Mouse Mode
Press the icon then the pen will work in fully function of mouse.
Press the speed control button on the pen to choose the move
speed of the mouse pen.
Pen Mode
Press the icon then the pen will work as a real pen.
Press the pen nib and you can write or draw on word ,excel,
power point, outlook and other office 2003/2007 tools.
Press the speed control button on the pen to choose a suitable level from
three different levers ,to change the writing speed and word size.
(If it’s a wireless laser mouse pen, before use it, Please insert the pen into the
pen stand to charge until the light on the pen stand turn green, then turn the
power switch to “ON” position.)

Appending:
Please reinstall your office 2003 to “complete install” type if your system is
Windows XP.
It is unnecessary to reinstall if you have complete installed your office 2003 .
1.This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
2 .Changes or modifications not expressly approved by the party responsible
for compliance
could void the user's authority to operate the equipment.
Other relevant information
System requirements
Operating system Microsoft Windows 98SE/ME/2000/2003/XP/ Vista/Mac
CPU speed Above Pentium III 1.0 GHZ
interface Available USB2.0 port
memory Above 256m memory
driver CD-ROM /DVD-ROM (For installing driver software)
screen Multicolor screen

Specification
type PC-PEN (T-20)
Frequency 2.4GHz (2408 – 2472 MHz; 9 channels)
Valid distance Without obstacle:50M;with obstacle: 15M
resolution 800DPI/400DPI/300DPI
Valid inspect angle 30°-150°
Valid handwriting
angle
50°-90°
power USB port（DV 5V）
Consumption power Max:0.2W
Input power Max:500mA
Battery Li-Polymer DC3.7V，300mA
Usage life 5.5hours
Standby time 26hours
size 155mm（length）*26mm（diameter）*29mm（height）
weight At most 50g（exclude USB wire）
Antenna Built-in antenna 1.0dBi
RF modulation GFSK