Peavey Windsor 412 User manual

Power handling:
200 watts continuous
Transducer complement:
Four 12" Supreme™ XL speakers
Impedance, Z:
16 ohms
Input connection:
1/4" phone jack
Enclosure construction:
Mono-plane baffle,
closed-back construction
Grille can be unsnapped to
access speakers
Dimensions (H x W x D):
32" x 30 1/8" x 14 3/8"
Net Weight:
89.6 lbs.
Description
The Windsor 412 is a heavy duty
loudspeaker cabinet designed to
complement the Windsor head and
a wide variety of guitar amplifier
heads and combos with external
speaker capabilities. It is available
in both straight and slant versions
and loaded with four front-loaded,
custom-built 12" Supreme XL
speakers.
The Windsor 412 emphasizes the
low-end response of your amp while
maintaining a versatile balance of
mids and highs to provide an array
of awe-inspiring clean and distorted
tones.
3 + 2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the
warranty statement. Copies
of this statement may be
obtained by contacting Peavey
Electronics Corporation, P.O.
Box 2898, Meridian, Mississippi
39301-2898 or on our website
at http://www.peavey.com/
support/warrantyregistration/
warrantytext.cfm.
SPECIFICATIONS Windsor™ 412
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39305
[phone] • FAX [phone] • www.peavey.com
©2006 EX000054
Logo referenced in Directive 2002/96/EC Annex IV
(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005
The bar is the symbol for marking of new waste and
is applied only to equipment manufactured after
13 August 2005