Pegler Waterfall 4S4502 Maintenance manual

Your Guide to the installation, care
and maintenance of
Waterfall
Multi Mode Shower kits
4S4502 4S4503 4S4504
Pegler Limited, St. Catherine’s Avenue, Doncaster, South Yorkshire. DN4 8DF
Telephone: [phone] Fax: [phone]
4S4504
4S4503
4S4502

Assembling instructions
1) Make 2 holes of diameter 8 mm at a distance of 610 mm
2) Introduce the 2 wall plugs and fix with the screws.
3) Push the screw covers into shower rail fittings.
4) To fix the soap dish to sliding rail, clip plastic ring onto rail, then slide soap dish downwards
onto plastic ring.
5) Connect the shower to the flexible hose
1.
3.
2.
Water Regulations Requirements:
It is important to ensure that the water supplies to your shower are connected in accordance with the water
regulations (WRAS) requirements and good plumbing practice.
Bylaw 17 (2) B
The shower head of any shower hose pipe should be fitted by a fixed or sliding attachment so that it can only be
discharged at a point not less than 25mm above the spill-over level of bath tray or fixed appliance.
PLEASE NOTE:
The correct type of wall fittings are used to ensure ridgity of the slider rail, ridged riser, fixed head shower or
wall union. The correct plumbing fittings and connections must be used to install the ridgid riser rails, shower heads
and wall unions.
Slider Rails are not safety grab rails. Special safety grab rails can be purchased form Pegler ref: No: 4S4531 / 4S4532.

Overall dimensions
Care and Maintenance
To maintain the surface finishes, simply wipe occasionally
with a mild detergent on soft damp cloth. Dry using soft
cloth, never use abrasive cleaners or chemical household
cleaners avoid contact with concentrated bleach.
Pegler products are manufactured to the highest standards
and should require little or no maintenance. In the unlikely
event of any spare part being required, please visit our web
site: www.pegler.co.uk or contact your nearest stockist
or the Pegler Technical Office on telephone number 0870
1200285.
4S4502 4S4503
4S4504

Showers are guaranteed for 5 years from the date of purchase.
Full guarantee details are available on request.
YEAR
GUARANTEE
experience design innovation
For further information, please contact your appropriate sales office.
Technical customcare line 0870 1200285
www.pegler.co.uk
HEAD OFFICE
Pegler Limited,
St Catherine’s Avenue,
Doncaster,
South Yorkshire DN4 8DF.
Tel: [phone]
Fax: [phone]
Internet: www.pegler.co.uk
EXPORT
Tel: [phone]
Fax: [phone]
Email: [e-mail]
UK
Northern team:
Tel: [phone]
Fax: [phone]
Southern team:
Tel: [phone]
Fax: [phone]
Western team:
Tel: [phone]
Fax: [phone]
Email: [e-mail]
5