Pendo 50" User manual

USER MANUAL
> Please read carefully before use
HD TV
50” LED LCD TV
US
E
R
M
ANU
A
L

Warning
1
REGULATORY INFORMATION
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
CAUTION
DO not attempt to modify this product in any way without written authorization
from supplier. Unauthorized modification could void the user's authority to operate
this product.
It is not recommended to keep a certain still image displayed on the screen for a
long time as well as displaying extremely bright images on screen.
Figures and illustrations in this User Manual are provided for reference only
and may differ from actual product appearance. Product design and
specifications may be changed without notice.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

Warning
2
WARNING
To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To
Rain Or Moisture.
The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc.
The Apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
Attention should be drawn to the environmental aspects of battery disposal. Don’t
throw used batteries in dustbin. Please contact your retailer in order to protect the
environment.
When you install your TV, maintain a distance of at least 4 inches between the TV
and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to
maintain proper ventilation may result in a fire or a problem with the product
caused by an increase in its internal temperature.
No naked flame sources, such as lighted candles, should be placed on the
apparatus;
To prevent the spread of fire, keep candles or other open flames away from this
product at all times.
The device may be malfunction when under electrostatic discharge. It can be
manually resumed by power off and power on again.
CAUTION connecting the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that appliance and has no additional outlets
or branch circuits.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions could result in electric shock or
fire. Periodically examine the cord of your appliance, and its if appearance
indicates damage or deterioration, unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits the appliance.
The MAINS plug is used as the disconnect device, and the disconnect device shall
remain readily operable.
Operating Temperature: 0°C to 40°C
Operating Humidity: ≤80%
Storage Temperature: -20°C to 60°C
Storage Humidity: ≤90%
This equipment is a Class  or double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection to
electrical earth.

Safety instructions
3
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
7. Do not block any of the ventilation
openings. Install in accordance with
the manufacturer's instructions.
5. Do not use this apparatus near water.
8. Do not install near any heat source
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
6. Clean only with a dry cloth.
9. Do not defeat the safety purpose of
the polarized or grounding type plug. A
polarized plug has two blades with one
wider than other. A grounding type
plug has two blades and a third
grounding prong. The wide blade or
the third prong is provided for your
safety. When the provided plug does
not fit into your outlet, consult an
electrician for replacement of the
obsolete outlet.

Safety instructions
4
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles,
and the point where they exit from
the apparatus.
13. Unplug this apparatus during
lightning storms or when unused for
long periods of time.
11. Only use the attachments/
accessories specified by the
manufacturer.
14. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such as
power supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
12. Use only with a cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
ON DISPOSAL
-The fluorescent lamp used in this product contain a small amount of mercury.
-Do not dispose of this product with general household waste.
-Disposal of this product must be carried out in accordance to the regulations of
your local authority.
NOTE
-If the TV feel cold to the touch, there may be a small "flicker" when it is turned on.
This is normal, there is nothing wrong with TV.
-Some minute dot defects may be visible on the screen, appearing as tiny red,
green, or blue spots. However there have no adverse effect on the monitor's
performance.
-Avoid touching the screen or holding your finger(s) against it for long periods of
time. Doing so may produce some temporary distortion effect on the screen.

Getting Started
5
Using the Remote Control
When using the remote control, aim it at remote sensor on the television. If there is an
object between the remote control and the remote sensor on the unit, the unit may no
operate.
•Point the remote control at the REMOTE SENSOR located on the television.
•When using this television in a very brightly lit area, the infrared REMOTE CONTROL
SENSOR may not work properly.
•The recommended effective distance for using the remote control is about 7 metres.
Installing Batteries in the Remote Control
1. Open the cover at the back of the remote control.
2. Install two AAA size batteries. Make sure to match
the “+” and “-” ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Battery Replacement
You will need to install the batteries into the remote control to make it operate following
the instruction below.
When the batteries become weak, the operating distance of the remote control will be
greatly reduced and you will need to replace the batteries.
Notes on Using Batteries:
The use of the wrong type of batteries may cause chemical leakage and/or explosion.
Please note the following:
•Always ensure that the batteries are inserted with the + and - terminals in the correct
direction as shown in the battery compartment.
•Different types of batteries have different characteristics. Do not mix different types.
•Do not mix old and new batteries. Mixing old and new batteries will shorten battery life
and/or cause chemical leakage.
• Replace batteries as soon as they do not work.
•Chemicals which leak from batteries may cause skin irritation. If any chemical matter
seeps out of the batteries, wipe it up immediately with a dry cloth.
• The batteries may have a shorter life expectancy due to storage conditions. Remove
the batteries whenever you anticipate that the remote control will not be used for an
extended period.
•The batteries (battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
CAUTION:
•It may result in an explosion if batteries are replaced incorrectly.
•Only replace batteries with the same or equivalent type.

Connection and Setup
6
Cable Installation
Before the installation and use, please read carefully the relevant content in “Warning
and Safety instructions”.
1. Take the TV from the wrapping package and put it in a drafty and flat place.
NOTE:
• When you plug or unplug the TV, computer or other equipments, you must make sure
that the AC power has been already shut down;
• When unplugging the power cable or signal cable, please hold the plug (the insulated
part), do not draw the body of the cable.
2. The RF output terminal can be connected with the RF input port of the TV.
3. The output AV terminal of DVD can be connected with the AV input port of the TV
through AV cable.
NOTE:
• Component and AV can not be used at same time for they share of one audio
channel.
4. The output COMPONENT(YPbPr) terminal of DVD can be connected with the
COMPONENT(YPbPr) input port of the TV through AV cable.
5. Connect one end of the VGA cable with the VGA port on computer, connect the other
end of the VGA cable with the VGA port on the TV, and tighten the bolts clockwise on
the each end of VGA cable.
NOTE:
• While connecting the 15-pin VGA, please do not insert the plug overexertedly, for fear
the pin might be broken.
6. Connect one end of the HDMI cable with HDMI output port, connect the other end of
the HDMI cable with the HDMI port on the TV.
NOTE:
• While connecting the HDMI, please aim at carefully, do not insert overexertedly, for
fear the pin might be broken.
7. Sending the TV's audio signal to external audio equipment via the Digital Audio
Output port.
8. Check and make sure that all AV cables are connected with the corresponding ports
correctly.
9. Connect the AC power cable with 100-240V AC power supply.
NOTE：
• The range of power input for the TV is 100-240V, 50/60Hz, do not connect the TV
power input port with the AC power out of the above range.
• Please hold the insulated part of the plug when you are unplugging the power cable,
do not touch directly the metallic part of the cable.

Remote Control
7
The buttons of the original remote control are as following:
1.
: Power, switch on or off TV set.
2. INFO: Press to display the current program
information on the screen.
i
: Go to the index page.
3.
: Press to mute or restore sound.
4. NUMBER BUTTONS: Choose channels or
password importation.
5. SOURCE: Press to select signal source.
?
: Reveal the hidden information of
some teletext pages.
6. AUDIO (∞I/II): Select sound mode in ATV
mode and switch Audio language in DTV
mode.
7. MENU: Press to enter the menu screen for
various optional adjustable settings.
8. EXIT: Exit OSD Menu.
9. ENTER: Press to execute the selected
item in the menu screen.
10. ▲/▼/◄/►: To select the direction.
11. INDEX: Press to enter the quick menu.
(In USB mode) Press to enter the PVR
Settings(In DTV mode).
12. LIST: Press to call up the channel list.
Press again to exit it.
13. CH+/CH-: Press to select channels in
ascending or descending order.
14. VOL+/VOL-: Press to adjust the volume
level up or down.
15. SLEEP: Press to set the sleep timer.
When the preset length of time has
passed, the TV set enters standby mode.
16.
: Switch on/off the favorite programs
list.
17. EPG: Electronic Program Guide, use in
the DTV mode.
18.
: Return to last viewed program.

Remote Control
8
NOTE:
!All pictures in this manual are examples, only for reference, actual product may differ
from the pictures.
!The buttons not mentioned here are not used.
19. COLOR BUTTONS: Red/ green/ yellow/
blue key navigation link.
: Fast reverse (in USB mode).
: Fast forward (in USB mode).
: Previous (in USB mode).
: Next (in USB mode).
20. STILL: Press to hold the picture.
: Hold the teletext page on display,
press again to release.
: Stop (in USB /PVR mode).
21.
: Enter the Teletext, press again for
MIX mode, press this button again to
exit.
: Play / Pause (in USB mode).
22. RADIO: Press to interchange Radio and
DTV programs when there is Radio
program (In DTV mode).
23.
: Press to select different images
sizes.
: Change size of teletext screen in
display mode.
24.
: Enter subtitle mode or subpage.
25.
: Cancel the teletext but not to exit
teletext, press again to exit.
26. DMP: Press to switch to the USB source.
27.
: Press
button to start recording. (In
DTV mode).

Basic Operation
9
Installation Guide
When the TV is initially powered on, a sequence of on-screen prompts will assist in
configuring basic settings.
1. Selecting a language
Select the desired OSD language, then press the ENTER button to go to the next
page.
2. Selecting a country
Select the appropriate country, then press the ENTER button to start Channel
Tuning.
3. Channel Tuning
Scans for channels automatically and stores them in the TV’s memory.
Turning on and off the TV
■Turn on the TV
Connect the power cable, and press the button to turn on the TV.
■Turn off the TV
Press the button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug
the set from the mains and aerial.
When there is an accident power off, it is recommended to unplug the power cable
from the power socket.
■No signal
There is No Signal menu on screen when there is no input signal. In TV mode, if no
signal received in 5 minutes, the TV will start the countdown and turn off
automatically after it. In VGA mode, if no signal received in 1 minute, the TV will
start the countdown and turn off automatically after it. When VGA cable is
connected, the TV turns on automatically.
Programme Selection
■Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to increase channel number.
Press CH - to decrease channel number.
■Using 0- 9 digital buttons.
You can select the channel number by pressing 0 to 9. (In ATV, DTV mode)
■Example
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
Volume Adjustment
■Press the VOL+/- button to adjust the volume.
■If you want to switch the sound OFF, press the
.
■You can release mute by pressing the
or increase the volume.

Basic Operation
10
Changing the Input Source
1. You can select the input source by pressing the SOURCE button on the remote
control.
2. Press the▲/▼button to cycle through the input source, and press the ENTER button
to confirm your choice.
How to Navigate Menus
Before using the TV follow the steps below to learn how to navigate the menu in order
to select and adjust different functions. The access step may differ depending on the
selected menu.
1. Press the MENU button to display the main menu.
2. Press the◄/►button to cycle through the main menu.
3. Press the▲/▼button to select the desired sub item.
4. Press the ENTER button to access the submenu.
5. Press the ▲/▼/◄/►button to select the desired value. The adjustment in the
OSD may differ depending on the selected menu.
6. Press the MENU button to return to the previous menu.
7. Press the EXIT button exit from the menu.
NOTE: !When an item in MENU is displayed gray, it means that the item is not
available or cannot be adjusted.
!Some items in the menus may be hidden depending on modes or signal sources
used.
!Buttons on the TV have the same function as corresponding buttons on the remote
control. If your remote control is lost or couldn’t work, you may use the buttons on the
TV to select menus. This manual focuses on operation of the remote control.

Menu Operation
11
Configuring the Channel Menu
■Auto Tuning: Press the ENTER
button to start Channel Tuning.
1. Select the country and tune
type for channels.
2. The TV will begin memorizing
all of the available channels.
■DTV Manual Tuning: Manual
store for digital channels.
Press the ◄/►button to select
channel. Press the ENTER
button to search.
When a channel is found, the searching process will stop, the channel will be saved
with current channel number.
If the program is not your expected one, please press the ◄/►button to continue
the searching. Press the EXIT button to exit.
■ATV Manual Tuning: Manual store for ATV channels.
Press the ▲/▼button to select items.
Press the ◄/►button to adjust it.
Press the red button to save it.
Press the EXIT to exit.
■Programme Edit: Press the ▲/▼button to select a channel.
Press the red button to delete the channel.
Press the green button to rename the channel. (In ATV mode)
Press the yellow button to move the channel.
Press the blue button to skip the channel.
Press the
button to set the favorite channel.
■Signal Information (In DTV mode): Display the current Signal Information.
Configuring the Picture Menu
■Picture Mode: You can select
the type of picture which best
corresponds to your viewing
requirements.
Contrast, Brightness, Color,
Sharpness and Tint (NTSC)
can be adjusted when the
picture mode is set to User.
■Color Temperature: Select
the color temperature of the
picture.
■Aspect Ratio: You can select
the picture size which best corresponds to your viewing requirements.

Menu Operation
12
■Noise Reduction: Reduces screen noise without compromising video quality.
■Screen (In VGA mode)
Auto Adjust:Adjust the image automatically.
Horizontal Pos.: Centre the image by moving it left or right.
Vertical Pos.: Centre the image by moving it up or down.
Size:Adjust the screen size.
Phase: Adjust when characters have low contrast or when the image flickers.
Configuring the Sound Menu
■Sound Mode: You can select
a sound mode to suit your
personal preferences. Items
can be adjusted when the
sound mode is set to User.
■Balance: You can adjust the
sound balance of the speakers
to preferred levels.
■Auto Volume: Auto Volume
automatically remains on the
same level of volume if you change programmes. Because each broadcasting station
has its own signal conditions, volume adjustment may be needed every time when
the channel is changed. This feature allows users to enjoy stable volume levels by
making automatic adjustments for each program.
■SPDIF Mode: You can select a desired SPDIF mode.
Configuring the Time Menu
■Clock: Display the DTV Signal
Stream Time or set the System
Time manually.
■Off Time: Set the time for the
TV to switch off.
■On Time: Set the time for your
TV to turn on.
The TV must be in standby
mode for the On Time to work.
■Sleep Timer: Select the time
to turn the TV to standby mode automatically.
■Auto Sleep: Turn the auto sleep function on or off.
■Time Zone: Select your time zone.
Configuring the Option Menu

Menu Operation
13
■OSD Language: Select your preferred On Screen Display language.
■Hearing Impaired: When
hearing Impaired is On, the TV
screen will give some
information to the people
whose hearing are impaired
when Hearing Impaired is Off,
the information will be hidden.
■PVR File System (In DTV
mode)
Select Disk: Select the disk
used for PVR.
Check PVR File System: Check the disk and test the speed of the system.
USB Disk: USB activated or not.
Format(Hard Disk Recommended): Format USB disk.
Time Shift Size: Select the time to do Time Shift.
Speed: Display speed of the storage device.
Free Record Limit: Select the recording duration.
Digital program recording
Insert an U disk, the system will automatically create a folder (_MSTPVR) to store
the files has been recorded.
Carve-recording begins when button pressed, and it records all the time until
button pressed or the memory is full.
During the recording, press button to hide/display the record menu.
Time shift function
Press the
button to activate Time Shift while recording.
Press button to hide/display the Time shift menu.
You can operate refer to the time shift menu.
Recorded List
Press the INDEX button to display the Record list.
Press the ▲/▼button to select items, then press ENTER button to play.
Press the red button to delete the programme.
Press the green button to display the programme information.
Press the INDEX button to sort programmes.
Press EXIT button to exit.
!USB disk at least the capacity with 512MB.
!Please format the inserted USB disk when it could not be recorded to.
!During the Device formatting, do not disconnect the device while formatting is in
progress. If you format the device, all files will be deleted. Before formatting your

Menu Operation
14
device to the TV, please back up your files to prevent them from damage or loss
of data. If USB disk in some virus meeting formats turn failure.
!When an USB device has several partitions,the PVR system can help to choose
anyone of that to perform recording.
!If PVR recording system is used all the time, it will exit PVR system automatically.
!USB memory must support USB2.0 high-speed specification.
!Some of nonstandard USB device may not be supported.
■OSD Time Out: Select On-Screen Menu displaying time.
■Blue Screen: Set the background color to blue or black when having no input
signal.
■OSD Transparency: Menu transparency selection, you can select menu
transparency according to the different background picture.
■Restore Factory Default:Restore the system settings to the factory default.
Configuring the Lock Menu
Press your password (it is 0 0 0 0 at first), Then you will go the sub-menu as following.
■Lock System: Set the system lock On or Off.
■Set Password: You can set your private password. Press the number buttons on
the remote control to set the
new password. When the new
password has been input twice,
the setting is finished
successfully.
■Block Program (In ATV/DTV
mode): Press the green button
to lock the available program
you want. Press the green
button again to unlock it.
■Parental Guidance (In DTV
mode):This feature can prevent children watching adult’s TV programmes,
according to the rating limit set. This function appearance according the information
from broadcasting station. Therefore if the signal has incorrect information, this
function does not operate.
Using USB mode
■To Access/Quit USB mode
Connect an USB device. Press SOURCE button to display the main menu. Use the
▲/▼to highlight USB, and the ENTER button to access the USB mode. You may
also use the signal source selection menu to exit from the USB mode.
!Special USB device may be not or well supported.
!USB max. Load: DC5V 500mA.

Menu Operation
15
!In terms of loading capacity, it can not support all models of mobile hard disk. It is
recommended to use low-power mobile hard disk of no more than 500mA current.
■The formats supported
Photo Format Support: .jpg/.jpeg/.bmp/.png
Music Format Support:.mp3/ .wma/ .m4a/ .aac
Movie Format Support: .mpg/ .ts/ .mov/ .mkv/ .dat/ .mp4/ .vob
File Format Support: .txt
!Special algorithm documents may not be or well be supported by the USB.
!The USB supports the format mentioned above, if the file format is not supported,
change it to the given format.
■Main Operating Interface
PHOTO/ MUSIC/ MOVIE/ TEXT
1. Use the ◄/►button to select PHOTO, MUSIC, MOVIE or TEXT. Press ENTER
button enter into sub-menu.
2. Use the arrow buttons and ENTER button to enter the desired disk. Press the
arrow buttons and ENTER button to open the folder.
3. Use the arrow buttons to highlight the file.
• Use the ENTER button to mark or unmark a file. Press
button to play the
selected files. If no file is marked, all the files in the folder will be played in
sequence after you press
button.
• Press the blue button to select or unselect all files.
• Press the red button to access to the submenu, then you can delete or copy and
paste the seleted file.
4. Press the INFO button to display the menu screen in playing.
5. Press the
to stop the playing files.
6. Use the arrow buttons to highlight the Up Folder icon, press the ENTER button to
return to the previous menu screen.
7. Press the EXIT button to exit.

Important Unique Buttons
16
Programme Guide (In DTV mode)
Press EPG button to display the Programme Guide menu. This function let you know
the detailed information of the channel, indicating the time of the program playing. From
the PROGRAMME GUIDE it is possible to check the program information for the next
eight days (If the information is available from the broadcaster). Press EXIT button to
exit.
Record: Press red button to set the parameters for recording. The unit is able to do
schedule recording when TV is turning on or in standby mode. You can set up several
schedule recording. Different schedules should not overlap. When recording starts in
standby mode, the front indicators will change color and there will be no picture or
sound from the unit.
INFO: Press green button to see the detailed information of the current channel.
Schedule: Press the yellow button to display the Schedule list and Start time.
Remind: If you find the desired program which will be shown in the future. Press the
blue button to book program.
INDEX: Change the list by TIME or CHANNEL.
ENTER: Press to change channel.
Channel List
Press LIST button to display the Channel List.
Press ▲/▼to select the items.
Press ENTER button to enter the channel.
Press CH+/CH-button to page down or up the Channel list.
Press LIST button to exit.
Favorite List
Press
button to display the favorite list.
Press ▲/▼to select the items.
Press ENTER button to enter the channel.
Press CH+/CH-button to page down or up the Favorite list.
Press
button to exit.

Teletext
17
Using the teletext feature
■Display teletext
1. Select a TV station with a teletext signal.
2. Press the
button to enter teletext mode.
3. Press the
button 2nd to enter Mix mode, this function enables you to
superimpose the teletext page over the TV program.
4. Press the
button 3rd return or exit to the normal ATV mode.
■Page selection
1. Enter the page number (three digits) using the number buttons. If you press a
wrong number during input, you must complete the three digit number and then
reenter the correct page number.
2. The ▲/▼button can be used to select the preceding or following page.
■Hold
You can press the
button to hold a page, and press it again to release the
page.
■Index
Press the
i
button to enter the main index page directly.
■Enlarging Text
When a page is displayed, you can double the size of the text to make it easier to
read.
1. Press the
button to enlarge the top half of the page.
2. Press the
button again to enlarge the bottom half of the page.
3. Press the
button once more to return to the normal display.
■Reveal mode
You can display concealed teletext information (e.g. Answer to puzzles or riddles
etc.) by pressing
?
button. Press
?
button again to remove the information
from the display.
■Subpage
Some teletext may contain several sub-pages which are automatically paged in a
certain cycle by the TV station.
1. Yon can enter into a certain sub page by pressing the
button directly and
select the page number with number buttons. Enter the sub page number (e.g. 0003)
for the third sub page.
2. Press the button again to exit the sub page mode.
■Color buttons (Red, Green, Yellow and blue)
Press these buttons to access directly to the corresponding color pages displayed at
the lower part of the teletext screen.

Troubleshooting Guide
18
Troubleshooting
Before contact the service technician, perform the following simple checks. If any
program still persists, unplug the TV and calling for serving.
Symptoms
Possible Reason
Solutions
No picture, no sound,
and no indicator light on
1.The power cord is not plugged in
2.The power is off
1.Plug the power cord in
2.Turn the power on
Picture and sound with
abnormity
1.Contrast, sharpness, and color
are set improperly
2.Color system is set improperly
3.Sound system is set improperly
1.Adjust the value of
Contrast, sharpness, and
color
2.Set the Color system to
the country broadcasting
standard
3.Set the Sound system to
the country broadcasting
standard
Picture is spotted or with
snow
Signal source is low-grade or the
signal cord is in a lower quality
Use the qualified signal cord
No picture, no sound
and indicator light is
green/blue
Volume is in the minimum value or
TV is in mute mode.
Adjust the value of volume
The signal cable is not correctly
connected.
Connect the signal cable
correctly
Blue screen, AV is
displayed
There is no signal input or the video
cable is not connected or
incorrectly connected
Connect the video cable
correctly
Picture is unclear or
shaking or with black
horizontal strips (in PC
mode)
PC picture is not correctly adjusted.
Enter into Screen menu,
select Auto Adjust item to
perform automatic
calibration and adjust Phase
to solve the problem
PC picture is not
centered
No sound
There is no audio signal input or
audio cable is not connected
correctly
Connect the audio cable
correctly
PC picture display with
improper color
The color temp is adjusted
incorrectly by user
Readjust the color temp, or
select the original color
setting
HDMI source, with snow
pixel of full screen
The source generate is not
standard
Plug the HDMI cable again

Troubleshooting Guide
19
The remote control does
not work
Batteries are improperly installed or
exhausted
1. Make sure the positive
and the negative
polarities are correct.
2.Check if there is a loose
contact between the
batteries and the springs
3.Replace the batteries
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the
amount of time you will have your new TV. Be sure to turn the power off and unplug the
power cord before you begin any cleaning.
Cleaning the screen
1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a
mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring
the cloth until it’s almost dry, and then used it to wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn
on your TV.
Cleaning the cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure
not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a
good idea to unplug the power cord to protect against possible damage from
lightning or power surges.
Disposal of old electrical appliances
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances must
not be disposed of in the normal unsorted municipal waste stream. Old
appliances must be collected separately in order to optimize the recovery
and recycling of the materials they contain, and reduce the impact on human
health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance, it must be separately
collected.
Consumers should contact their local authority or retailer for information
concerning the correct disposal of their old appliance.