Penguin Edge 6310 User manual

6310 Application Ready Platform (SYS6310)
User Guide
P/N: Rev A
December 13 2022

Confidential and Proprietary
SMART Wireless Computing, Inc. dba Penguin Solutions
NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers or web sites to:
[email protected]m.
Restricted Distribution: Not to be distributed to anyone who is not an employee of either SMART Global Holdings
or its subsidiaries without the express approval of SMART Wireless Computing.
Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to
others without the express written permission of SMART Wireless Computing.
These commodities, products, software, technology and/or technical data may be subject to U.S. and international
laws, rules or regulations governing export, re‐export and retransfer within country. They may not be resold,
transferred, otherwise disposed of to any other country or to any person other than the authorized end‐user(s), either
in their original form or after being incorporated into other items, without first obtaining approval from the U.S.
government or as otherwise authorized by U.S. law and regulations.
License Agreement
Your use of this document is subject to and governed by those terms and conditions in the SMART Wireless Computing
Purchase and Software License Agreement for the SDA450 based Inforce 6310 hardware, which you or the legal entity
you represent, as the case may be, accepted and agreed to when purchasing a Inforce 6310 hardware from SMART
Wireless Computing (“Agreement”). You may use this document, which shall be considered part of the defined term
“Documentation” for purposes of the Agreement, solely in support of your permitted use of the Inforce 6310 hardware
under the Agreement. Distribution of this document is strictly prohibited without the express written permission of
SMART Wireless Computing Inc. and its respective licensors, which they can withhold, condition or delay in its sole
discretion.
These commodities, products, software, technology and/or technical data may be subject to U.S. and international
laws, rules or regulations governing export, re‐export and retransfer within country. They may not be resold,
transferred, otherwise disposed of to any other country or to any person other than the authorized end‐user(s), either
in their original form or after being incorporated into other items, without first obtaining approval from the U.S.
government or as otherwise authorized by U.S. law and regulations.

Revision History
Revision
Date
Description
Author
A
June 09 2021
Initial Revision
SP

Table of Contents
1. SCOPE ....................................................................................................................................... 5
1.1 ANTI-STATIC HANDLING PROCEDURES ................................................................................................................5
1.2 HARDWARE IDENTIFICATION LABELS ....................................................................................................................5
2. HARDWARE SPECIFICATION................................................................................................. 6
2.1 INTRODUCTION .......................................................................................................................................................6
2.2 SYSTEM SPECIFICATION ........................................................................................................................................6
2.3 ARCHITECTURE .......................................................................................................................................................7
2.4 BOARD FAMILIARIZATION .......................................................................................................................................8
3. SYSTEM SETUP AND USAGE............................................................................................... 10
3.1 HARDWARE SETUP ...............................................................................................................................................10
3.2 HARDWARE OPERATION ......................................................................................................................................11
4. COMPLIANCE DETAILS......................................................................................................... 13
4.1 CLASS B PRODUCT COMPLIANCE STATEMENT .................................................................................................13
4.2 EU COMPLIANCE STATEMENT ..............................................................................................................................13
4.3 FCC RADIATION EXPOSURE STATEMENT ...........................................................................................................14

6310 Application Ready Platform (SYS6310) User Guide SCOPE
P/N: Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 5
Confidential and Proprietary. Provided under NDA
1. SCOPE
This document describes the system setup and usage of Qualcomm Snapdragon SDA450 processor- based
6310 TM Application Ready Platform (SYS6310).
1.1 ANTI-STATIC HANDLING PROCEDURES
The SBC has exposed PCB and chips. Accordingly, proper anti-static precautions should be employed when
handling the kit, including:
Use a grounded anti-static mat
Use a grounded wrist or foot strap
1.2 HARDWARE IDENTIFICATION LABELS
Labels are present on the 6310 TM Application Ready Platform (SYS6310). The following information is
conveyed on the 6310 TM Application Ready Platform (SYS6310):
Serial Label
Ethernet MAC Address
Wi-Fi and BT MAC Address

6310 Application Ready Platform (SYS6310) User Guide HARDWARE SPECIFICATION
P/N: Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 6
Confidential and Proprietary. Provided under NDA
2. HARDWARE SPECIFICATION
2.1 INTRODUCTION
The 6310 Application Ready Platform (SYS6310) can be used to develop, test, and deploy end-user
product solutions around Qualcomm Snapdragon SDA450 processor.
2.2 SYSTEM SPECIFICATION
The following table shows the hardware specification of the 6310TM Application Ready Platform (SYS6310)
Table 1: 6310 Application Ready Platform (SYS6310) Specifications

6310 Application Ready Platform (SYS6310) User Guide HARDWARE SPECIFICATION
P/N: Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 7
Confidential and Proprietary. Provided under NDA
2.3 ARCHITECTURE
Figure 1: 6310 Application Ready Platform (SYS6310) Block Diagram
FCC CE

6310 Application Ready Platform (SYS6310) User Guide HARDWARE SPECIFICATION
P/N: Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 8
Confidential and Proprietary. Provided under NDA
2.4 BOARD FAMILIARIZATION
Figure 2: SYS6310 Application Ready Platform
The following figure shows the interface positions of the 6310TM Application Ready Platform (SYS6310)
Figure 3: SYS6310 Application Ready Platform IO Connectors
Bluetooth Classic:2402MHz - 2480MHz
BLE:2402MHz - 2480MHz
2.4GHz WIFI:
20MHz BW: 2412MHz - 2462MHz
40MHz BW: 2422MHz - 2452MHz
5GHz WIFI:
20MHz BW: 5180MHz - 5240MHz, 5260Hz - 5320MHz,
5500MHz - 5700MHz, 5745MHz - 5825MHz
40MHz BW: 5190MHz - 5230MHz, 5270MHz-5310MHz,
5510MHz - 5670MHz, 5755MHz - 5795MHz
80MHz BW: 5210MHz, 5290MHz, 5530MHz - 5610MHz,
5775 MHz
Bluetooth Classic: 2402MHz - 2480MHz
BLE:2402MHz - 2480MHz
2.4GHz WIFI:
20MHz BW: 2412MHz - 2472MHz
40MHz BW: 2422MHz - 2462MHz
5GHz WIFI:
20MHz BW: 5180MHz - 5240MHz, 5260Hz - 5320MHz,
5500MHz - 5700MHz
40MHz BW: 5190MHz - 5230MHz, 5270MHz-5310MHz,
5510MHz - 5670MHz
80MHz BW: 5210MHz, 5290MHz, 5530MHz - 5610MHz

6310 Application Ready Platform (SYS6310) User Guide HARDWARE SPECIFICATION
P/N: Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 9
Confidential and Proprietary. Provided under NDA
Table 2: SYS6310 Application Ready Platform interface Locations
No.
Description
1
DC Power Jack
2
Micro-AB USB Connector (Debug)
3
Micro HDMI Connector (Type D)
4
Stacked USB 3.0 Type A Connector
5
Ethernet - RJ45 Connector
6
Slot for Micro SD Card

3. SYSTEM SETUP AND USAGE
3.1 HARDWARE SETUP
The Figure below shows the Hardware setup of 6310 Application Ready Platform (SYS6310)
AC Mains Socket Power
Adapter: 12VDC 2A
Type A
Ethernet
Cable
HDMI
uUSB Out
DC Power
Jack
Dual USB Type
RJ45
Micro USB
Cable
HDMI
Cable(Type D)

3.2 HARDWARE OPERATION
STEPS TO BOOT 6310 APPLICATION READY PLATFORM (SYS6310)
Connect the DC power adaptor to the 6310 TM Application Ready Platform (SYS6310)
Carefully connect the DC connector to the jack provided on the board.
CAUTION
Use 12V, 2A DC Adaptor.
1. Connect the HDMI Out to a compatible display using an HDMI cable.
2. Switch ON the DC adaptor.
3. The board will boot up automatically.
NOTE
First time booting might take longer time than normal booting.
4. Android Version: After a few minutes, the "android" logo followed by the lock
screen will bedisplayed on the screen.
Mating Plug Specification for DC Jack
Current rating 2 A
Working Voltage:12V DC

FASTBOOT MODE
Follow the below steps to enter fast boot mode.
1. Connect 6310 TM Application Ready Platform (SYS6310) and host PC using a Micro USB cable
2. Power on the board.
3. Once the device is booted up, open the command prompt in the host PC and enter the following
commands
 adb devices
4. Once adb device is listed, enter bootloader using following command:
 adb reboot bootloader
5. To confirm if the device has entered fastboot mode, use below command
 fastboot devices

4. COMPLIANCE DETAILS
4.1 CLASS B PRODUCT COMPLIANCE STATEMENT
Note: This equipment has beentested and found to comply with the limits for aClass B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into anoutlet ona circuit different from that towhich the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
4.2 EU COMPLIANCE STATEMENT
The Frequency band(s) in which the radio equipment operates and maximum radio-frequency power
transmitted in the frequency band(s) in which the radio equipment operates are shown below
WIFI 2.4GHz:
20MHz: 14.92 dBm EIRP
40MHz: 14.13 dBm EIRP
WIFI 5GHz:
5150MHz –5250MHz, 5250MHz –5350MHz, 5470MHz –
5725MHz:
20MHz: 11.61 dBm EIRP
40MHz: 13.77 dBm EIRP
80MHz: 12.40 dBm EIRP
Bluetooth Classic:
9.19 dBm EIRP
BLE:
1.79 dBm EIRP

a. The 6310 is in compliance with the essential requirements and other relevant provisions of the RE
Directive 2014/53/EU.
b. This device is restricted to indoor use only whenoperating inthe 5150 to 5350 MHz frequency range.
c. A minimum separation distance 20cm is required.
4.3 FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This devicemust accept any interference received, including interference that may cause undesired
operation.

Penguin Solutions is a trade name used by SMART Wireless Computing, Inc., a wholly owned subsidiary of SMART Global Holdings, Inc. Penguin Edge
is a trademark owned by Penguin Computing, Inc., a wholly owned subsidiary of SMART Global Holdings, Inc. Qualcommand Snapdragon are
trademarks of QualcommIncorporated, registered in the United States and other countries. All other logos, trade names, and trademarksare the property
of their respective owners. ©2022 SMART Wireless Computing, Inc.