Pentax K-01 User manual

0
Thank you for purchasing this PENTAX
Digital Camera.
When you use this camera for the first time,
it is recommended you read this Quick Guide
first in order to gain a feel for the basic
operation of the camera. Refer to the
separately supplied “Operating Manual”
for further explanation of functions and
advanced operations of the camera.
Pentax_K-01_QSG.book Page 0 Wednesday, February 8, 2012 3:07 PM

To users of this camera
•Do not use or store this camera in the vicinity of equipment that generates
strong electromagnetic radiation or magnetic fields. Strong static charges or
the magnetic fields produced by equipment such as radio transmitters could
interfere with the monitor, damage the stored data, or affect the camera’s
internal circuitry and cause camera misoperation.
•The liquid crystal panel used for the monitor is manufactured using
extremely high precision technology. Although the level of functioning pixels
is 99.99% or better, you should be aware that 0.01% or fewer of the pixels
may not illuminate or may illuminate when they should not. However, this
has no effect on the recorded image.
•There is a possibility that the illustrations and the display screen of the
monitor in this manual are different from the actual ones.
•In this manual, SD Memory Cards, SDHC Memory Cards and SDXC
Memory Cards are referred to as SD Memory Cards.
•In this manual, the generic term “computer(s)” refers to either a Windows PC
or a Macintosh hereafter.
•In this manual, the term “battery(ies)” refers to any type of batteries used for
this camera and its accessories.
Pentax_K-01_QSG.book Page 0 Wednesday, February 8, 2012 3:07 PM

1
We have paid close attention to the safety of this camera. When using this
camera, we request your special attention regarding items marked with the
following symbols.
Warning
•Do not disassemble or modify the camera. High voltage areas are present
inside the camera, with the risk of electric shock.
•If the camera interior is exposed due to dropping or otherwise damaging the
camera, never touch the exposed portion. There is a risk of electric shock.
•Do not aim the camera at the sun or other strong light sources when taking
pictures or leave the camera sitting in direct sunlight with the lens cap off.
Doing so may cause the camera to malfunction or cause a fire.
•Do not look at the sun or other strong light sources through the lens. Doing
so may lead to a loss of eyesight or cause vision to be impaired.
•If any irregularities occur during use, such as smoke or a strange odor, stop
use immediately, remove the battery or the AC adapter, and contact your
nearest PENTAX Service Center. Continued use can cause a fire or
electrical shock.
Caution
•Do not place your finger over the flash when discharging the flash. You may
burn yourself.
•Do not cover the flash with clothes when discharging the flash.
Discoloration may occur.
•Some portions of the camera heat up during use. There is a risk of low
temperature burns when holding such portions for long periods.
Warning This symbol indicates that violating this item could
cause serious personal injuries.
Caution This symbol indicates that violating this item could
cause minor or medium personal injuries, or loss of
property.
About the Camera
For Using Your Camera Safely
Pentax_K-01_QSG.book Page 1 Wednesday, February 8, 2012 3:07 PM

2
•Should the monitor be damaged, be careful of glass fragments. Also, be
careful not to allow the liquid crystal to get on your skin or in your eyes or
mouth.
•Depending on your individual factors or physical condition, the use of the
camera may cause itching, rashes or blisters. In case of any abnormality,
stop using the camera and get medical attention immediately.
Warning
•Always use the battery charger and AC adapter exclusively developed for
this camera, with the specified power and voltage. Using a battery charger
or AC adapter not exclusive to this camera, or using the exclusive battery
charger or AC adapter with an unspecified power or voltage can cause
a fire, electric shock, or camera breakdown. The specified voltage
is 100 - 240V AC.
•Do not disassemble or modify the product. This can cause a fire or electrical
shock.
•If the generation of smoke or strange odor from the product or other
abnormality occurs, immediately discontinue using and consult a PENTAX
Service Center. Continued use can cause a fire or electrical shock.
•If water should happen to get inside the product, consult a PENTAX Service
Center. Continued use can cause a fire or electrical shock.
•If you see a lightning flash or hear the thunder during use of the battery
charger and AC adapter, unplug the power plug and discontinue use.
Continued use can cause damage to the product, fire or electrical shock.
•Wipe off the power plug if it should become covered with dust. Accumulated
dust may cause a fire.
•To reduce the risk of hazards, use only CSA/UL certified power supply cord
set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end
with a molded-on male attachment plug cap (with a specified NEMA
configuration), and the other is provided with a molded-on female connector
body (with a specified IEC nonindustrial type configuration) or the
equivalent.
About the Battery Charger and AC Adapter
Pentax_K-01_QSG.book Page 2 Wednesday, February 8, 2012 3:07 PM

3
Caution
•Do not place or drop heavy objects on or forcefully bend the AC plug cord.
Doing so may damage the cord. Should the AC plug cord be damaged,
consult a PENTAX Service Center.
•Do not touch or short-circuit the terminal area of the AC plug cord while the
cord is plugged in.
•Do not handle the power plug with wet hands. This can cause an electric
shock.
•Do not drop the product, or subject it to violent impact. This can cause the
product breakdown.
•Do not use the battery charger D-BC90 to charge batteries other than the
rechargeable lithium-ion battery D-LI90. Attempting to charge other types
of batteries may cause an explosion or heating, or may damage the battery
charger.
Warning
•If any leakage from the battery should come in contact with your eyes,
do not rub them. Flush your eyes with clean water and get medical attention
immediately.
Caution
•Only use the specified battery with this camera. Use of other batteries may
cause an explosion or fire.
•Do not disassemble the battery. Disassembling the battery may cause
an explosion or leakage.
•Remove the battery from the camera immediately if it becomes hot
or begins to smoke. Be careful not to burn yourself during removal.
•Keep wires, hairpins, and other metal objects away from the + and - contacts
of the battery.
•Do not short the battery or dispose of the battery in fire. This can cause an
explosion or fire.
•If any leakage from the battery should come in contact with skin or clothes,
it may cause irritation to the skin. Wash the affected areas thoroughly with
water.
About the Rechargeable Lithium-ion Battery
Pentax_K-01_QSG.book Page 3 Wednesday, February 8, 2012 3:07 PM

4
•Precautions for D-LI90 Battery Usage:
USE SPECIFIED CHARGER ONLY.
-DO NOT INCINERATE.
-DO NOT DISASSEMBLE.
-DO NOT SHORT CIRCUIT.
-DO NOT EXPOSE TO HIGH TEMP. (140°F/60°C)
Warning
•Do not place the camera and its accessories within the reach of small
children.
1. If the product falls or is operated accidentally, it may cause serious
personal injuries.
2. Wrapping the strap around a neck may cause suffocation.
3. To avoid the risk of a small accessory such as the battery or SD Memory
Cards from being swallowed by mistake, keep them out of the reach of
small children.
Seek medical attention immediately if an accessory is accidentally
swallowed.
Keep the Camera and its Accessories out of the Reach of Small
Children
Pentax_K-01_QSG.book Page 4 Wednesday, February 8, 2012 3:07 PM

5
•When traveling, take the Worldwide Service Network listing that is included
in the package. This will be useful if you experience problems abroad.
•When the camera has not been used for a long time, confirm that it is still
working properly, particularly prior to taking important pictures (such as at
a wedding or when traveling). Contents of the recording cannot be
guaranteed if recording, playback or transferring your data to a computer,
etc. is not possible due to a malfunction of your camera or recording media
(SD Memory Card), etc.
•To keep the battery in optimal condition, avoid storing it in a fully charged
state or in high temperatures.
•If the battery is left inserted and the camera is not used for a long time,
the battery will over-discharge and shorten the battery’s life.
•Charging the battery a day before use or on the day of use is recommended.
•The AC plug cord provided with this camera is developed exclusively for the
battery charger D-BC90. Do not use it with other devices.
•Do not subject the camera to high temperatures or high humidity. Do not
leave the camera in a vehicle, as the temperature can get very high.
•Do not subject the camera to strong vibrations, shocks, or pressure.
Use a cushion to protect the camera from vibrations of motorcycles,
automobiles, or ships.
•The temperature range for camera use is 0°C to 40°C (32°F to 104°F).
•The monitor may appear black at high temperatures, but will return to
normal at normal temperatures.
•The monitor may respond more slowly at low temperatures. This is due
to liquid crystal properties, and is not a malfunction.
•Sudden temperature changes will cause condensation on the inside and
outside of the camera. Place the camera in your bag or a plastic bag, and
remove it after temperature of the camera and surroundings are equalized.
Before Using Your Camera
About the Battery and Charger
Precautions on Carrying and Using Your Camera
Care to be Taken During Handling
Pentax_K-01_QSG.book Page 5 Wednesday, February 8, 2012 3:07 PM

6
•Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt.
These could cause the camera to breakdown. Wipe the camera to dry off
any rain or water drops.
•Do not press forcefully on the monitor. This could cause it to break or
malfunction.
•Be careful not to overtighten the screw in the tripod socket when using
a tripod.
•Do not clean the product with organic solvents such as thinner, alcohol,
or benzine.
•Use a lens brush to remove dust accumulated on the lens. Never use
a spray blower for cleaning as it may damage the lens.
•Please contact a PENTAX Service Center for professional cleaning
of the CMOS sensor. (This will involve a fee.)
•Do not store the camera with preservatives or chemicals. Storage in high
temperatures and high humidity can cause mold to grow on the camera.
Remove the camera from its case and store it in a dry and well-ventilated
place.
•Avoid using or storing the camera where it may be exposed to static
electricity or electrical interference.
•Avoid using or storing the camera in direct sunlight or in locations where it
may be exposed to rapid changes in temperature or to condensation.
•Periodic inspections are recommended every one to two years to maintain
high performance.
Cleaning Your Camera
Storing Your Camera
Pentax_K-01_QSG.book Page 6 Wednesday, February 8, 2012 3:07 PM

7
•The SD Memory Card is equipped
with a write-protect switch. Setting
the switch to LOCK prevents new
data from being recorded on the
card, the stored data from being
deleted, and the card from being
formatted by the camera or
computer.
•The SD Memory Card may be hot when removing the card immediately
after using the camera.
•Do not remove the SD Memory Card or turn off the power while the card is
being accessed. This may cause the data to be lost or the card to be
damaged.
•Do not bend the SD Memory Card or subject it to violent impact. Keep it
away from water and store away from high temperatures.
•Do not remove the SD Memory Card while formatting. The card may be
damaged and become unusable.
•Data on the SD Memory Card may be deleted in the following
circumstances. We do not accept any liability for data that is deleted if
1. the SD Memory Card is mishandled by the user.
2. the SD Memory Card is exposed to static electricity or electrical
interference.
3. the SD Memory Card has not been used for a long time.
4. the SD Memory Card or the battery is removed while the card is being
accessed.
•If the SD Memory Card is not used for a long time, the data on the card may
become unreadable. Be sure to regularly make a backup of important data
on a computer.
•Format new SD Memory Cards. Also format SD Memory Cards previously
used with other cameras.
Other Precautions
Write-protect
switch
Pentax_K-01_QSG.book Page 7 Wednesday, February 8, 2012 3:07 PM

8
•Please note that deleting data stored on an SD Memory Card, or formatting
an SD Memory Card does not completely erase the original data. Deleted
data can sometimes be recovered using commercially available software.
If you are going to discard, give away or sell your SD Memory Card, you
should ensure that the data on the card is completely deleted or the card
itself is destroyed if it contains any personal or sensitive information.
•The data on your SD Memory Card should be managed at your own risk.
Pentax_K-01_QSG.book Page 8 Wednesday, February 8, 2012 3:07 PM

9
OK
O K
OK
MENU
C a n c e l
Cancel
For capturing landscape
views. Enhances colors
of sky and foliage
L a n d s c a p e
Landscape
1 / 2
1/2
Checking the Contents of the Package
Check that your camera came complete with the items listed
below.
PCamera PStrap O-ST120
PSoftware (CD-ROM) S-SW120 PUSB cable I-USB7
PRechargeable lithium-ion battery
D-LI90
PBattery charger D-BC90
PAC plug cord PHot shoe cover (Installed on
camera)
PBody mount cover (Installed
on camera)
POperating Manual
OQuick Guide (this guide)
Pentax_K-01_QSG.book Page 9 Wednesday, February 8, 2012 3:07 PM

10
Back
Bottom
Mode dial
Built-in flash
Main switch
Shutter release button
K/i button
SD Memory Card slot
Four-way controller
Terminal cover
3 button
4 button
d (Red) button
N button
Monitor
Battery cover
Names of Parts and Monitor Indicators
In this Quick Guide, the arrow keys
to be pressed are expressed
as indicated on the right.
2
3
54
Pentax_K-01_QSG.book Page 10 Wednesday, February 8, 2012 3:07 PM

11
zMonitor Indicators
The following indicators are displayed in the standby mode.
Standard Information Display in Standby Mode
Remaining
image storage
capacity
Shake Reduction
Battery level
Capture Mode
Custom Image
Drive Mode
Flash Mode
Aperture value
Shutter speed
AF frame
Sensitivity
AE Metering
White Balance
Pentax_K-01_QSG.book Page 11 Wednesday, February 8, 2012 3:07 PM

12
zAttaching the Strap and Lens
zInstalling the Battery and SD Memory Card
Charge the battery before use.
SD Memory Card
Battery
Preparing the Camera for Use
1
1
Pentax_K-01_QSG.book Page 12 Wednesday, February 8, 2012 3:07 PM

13
zTurn the main switch to ON
zMaking the Initial Settings
The [Language/ ] screen appears when the camera is turned on
for the first time. Select the desired language and then set the date
and time.
Use the four-way controller (2345) to select the desired
language.
Press the 4 button.
The [Initial Setting] screen appears.
Press the four-way controller (3)
to move the frame
to W(Hometown).
Press the four-way controller (5) to display the [W Hometown]
screen.
Use the four-way controller (45) to choose the city.
1
2
2
Cancel
Cancel
MENU
Initial Setting
Initial Setting
Settings complete
Settings complete
English
English
New York
New York
OK
OK
OK
3
4
5
Turning the Camera On
2
2
Pentax_K-01_QSG.book Page 13 Wednesday, February 8, 2012 3:07 PM

14
Press the four-way controller (3) to move the frame to [DST]
(Daylight Saving Time).
Use the four-way controller (45) to select O (On) or P (Off).
Press the 4 button to display the [Initial Setting] screen again.
Press the four-way controller (3) to select [Settings complete],
and press the 4 button.
The [Date Adjustment] screen appears.
Press the four-way controller (5)
to select [mm/dd/yy], and use
the four-way controller (23)
to choose the date format.
Press the four-way controller (5) to select [24h], and use
the four-way controller (23) to select [24h] or [12h].
Press the 4 button, and press the four-way controller (3)
to move the frame to [Date].
Press the four-way controller (5) to select [01] (month),
[01] (day) or [2012] (year), and use the four-way controller (23)
to set the date to the current day.
Press the 4 button, and press the four-way controller (3)
to move the frame to [Time].
Set the time in the same manner as in .
Press the four-way controller (3) to select [Settings complete],
and press the 4 button.
6
7
8
9
Cancel
Cancel
MENU
Date Adjustment
Date Adjustment
Date Format
Date Format
Date
Date
Time
Time
mm/dd/yy
mm/dd/yy
24h
24h
0 1 / 0 1 / 2 0 1 2
01/01/2012
00:00
00:00
Settings complete
Settings complete
OK
OK
OK
10
11
12
13
14
15
15
13
15
16
Pentax_K-01_QSG.book Page 14 Wednesday, February 8, 2012 3:07 PM

15
zFormatting an SD Memory Card
Use this camera to format (initialize) an SD Memory Card that is
unused or has been used on another camera or digital device.
Be aware that formatting deletes all the data stored in the
SD Memory Card.
Format
Format
All data will be deleted
All data will be deleted
ġ
ġ
Cancel
Cancel
Format
Format
OK
OK
OK
Pentax_K-01_QSG.book Page 15 Wednesday, February 8, 2012 3:07 PM

16
Once the camera is ready for use, you can start taking pictures.
zLetting the Camera Choose the Optimal
Settings
First, try taking pictures with the easiest way.
Set the mode dial to n.
In n (Auto Picture) mode, the camera will automatically
select the optimal capture mode for your subject.
While viewing the monitor, position the subject inside the AF
frame.
When using a zoom lens, turn the zoom ring to frame the subject.
2
1
2
2
2
3
Taking Pictures
3
3
Pentax_K-01_QSG.book Page 16 Wednesday, February 8, 2012 3:07 PM

17
Press the shutter release button
halfway.
The AF frame turns green
when the subject comes into
focus.
Press the shutter release button
fully.
The picture is taken.
2
4
2
5
Pentax_K-01_QSG.book Page 17 Wednesday, February 8, 2012 3:07 PM

18
zTaking Pictures According to the Shooting
Scene
You can choose from various types of scene modes to match
the shooting conditions.
Set the mode dial to H.
The Scene Mode selection
screen appears.
Use the four-way controller
(2345) to choose a scene
mode, and press the 4 button.
The camera is ready to take
apicture.
Cancel
Cancel
MENU
OK
OK
OK
Portrait
Portrait
For capturing portraits.
For capturing portraits.
Reproduces a healthy
Reproduces a healthy
and bright skin tone
and bright skin tone
ġ
ġ
2
1
2
2
Pentax_K-01_QSG.book Page 18 Wednesday, February 8, 2012 3:07 PM