peplink PEPWAVE SD Switch Series User manual

Peplink SD Switch
User Manual
SD Switch Rugged 8-Port/16-Port/24-Port
SD Switch 24-Port/48-Port
Peplink SD Switch Firmware 1.2.2
May 2020
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Table of Contents
Introduction and Scope 4
Models & Specifications 5
SD Switch Rugged, 8-Port 5
SD Switch Rugged, 16-Port 7
SD Switch Rugged, 24-Port 9
SD Switch, 24-Port 11
SD Switch, 48-Port 13
Features 15
Quick Start Functions 16
Connect Ethernet 16
Connect SFP/SFP+ 16
Connect to the Management Port 16
Connect to the Console Port 17
InControl Configuration 18
Add the Switch to InControl 18
Enable InControl Cloud Management 19
InControl Group Settings 20
InControl DHCP Snooping 21
InControl STP Bridge Priority 22
Configuring VLANs 23
Define a new VLAN 25
Default VLAN Settings 26
InControl Device Details 27
Port details 29
Port Details and Configuration 30
Port List 31
LACP - Link Aggregation 32
InControl Reports 33
InControl Clients 33
InControl Settings 34
Standalone Configuration 35
Standalone menu options > Dashboard 36
Standalone menu options > Configure > Network Settings 37
Standalone menu options > Configure > STP 39
Standalone menu options > Configure > DHCP Snooping 40
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Standalone menu options > Configure > Access Control 40
Standalone menu options > Configure > Port Mirroring 42
Standalone menu options > IP Multicast > IGMP Snooping 43
Standalone menu options > Configure > Interfaces > Switch Ports 44
LACP (802.3ad) Configuration 47
Standalone menu options > Configure > Interfaces > External Access 48
Standalone menu options > Configure > Interfaces > USB Modem 48
Standalone menu options > System > Admin Security 50
Standalone menu options > System > Firmware 53
Standalone menu options > System > Time 53
Standalone menu options > System > Schedule 53
Standalone menu options > System > Email Notification 56
Standalone menu options > System > Event Log 56
Standalone menu options > System > SNMP 57
Standalone menu options > System > InControl 59
Standalone menu options > System > Configuration 60
Standalone menu options > System > Reboot 61
Standalone menu options > System > Tools > Ping 62
Standalone menu options > System > Tools > Traceroute 62
Standalone menu options > System > Tools > Wake-on-LAN 63
Standalone menu options > Status > Device 63
Standalone menu options > Status > Client List 64
Standalone menu options > Status > STP 65
Standalone menu options > Status > Event Log 65
Standalone menu options > Status > Usage Reports 66
Additional information 66
Restoration of Factory Defaults 66
Additional troubleshooting resources 67
Contact Us 67
 
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Introduction and Scope
The Peplink SD Switch range is fully managed, PoE+ Gigabit switches with Cloud Intelligence to allow
easy configuration and troubleshooting.
Switch management is hosted on our InControl cloud management platform (public and private versions
available) to allow you to configure your switch from any web browser.
Simplify management and cut down maintenance time by unifying your VLAN management across all
your Peplink devices (routers and switches).
Peplink SD switches are available with 8, 16, 24, or 48 PoE Gigabit Ethernet ports.
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Models & Specifications

SD Switch Rugged, 8-Port
 
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

SD Switch Rugged, 8-Port Specifications
LAN Interface
8x 802.3at (PoE+) GE Ports
2x SFP Ports
VLAN Groups
Yes
Fiber Module
2x 1 Gbps
AC Adapter
AC Input 100V-240V
DC Output 54V#
Power Input
DC Power DIN 2x 54V
Terminal Block: 12V - 56V DC
Power Consumption
20W System,
90W PoE+ Power Budget (supports up to 240W# )
Dimensions
(L x W x H)
8.2 x 6.3 x 1.7 inches
210 x 160 x 43 mm
Weight
2.2 pounds
1 kg
Operating Temperature
-40° – 149°F
-40° – 65°C
Humidity
15% - 95% (non-condensing)
Warranty
1-Year limited Warranty
# The bundled PSU provides 90W of PoE power budget. If you require 240W of power budget, please add 180W PSU (ACW-623) to
your device
 
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

SD Switch Rugged, 16-Port
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

SD Switch Rugged, 16-Port Specifications
LAN Interface
8x 802.3at (PoE+) GE Ports,
8x GE Ports
2x SFP Ports
VLAN Groups
Yes
Fiber Module:
2x 1 Gbps
Power Input
AC Input 100V-240V
DC Output 54V#
Power Consumption
20W System,
90W PoE+ Power Budget
(supports up to 240W# )
Dimensions
(L x W x H)
7.5 x 9.0 x 1.5 inches
190 x 226 x 35 mm
Weight
4.4 pounds
2 kg
Operating Temperature
-40° – 149°F
-40° – 65°C
Humidity
15% - 95% (non-condensing)
Warranty
1-Year limited Warranty
# The bundled PSU provides 90W of PoE power budget. If you require 240W of power budget, please add 180W PSU (ACW-623) to
your device
 
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

SD Switch Rugged, 24-Port
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

SD Switch Rugged, 24-Port Specifications
LAN Interface
24x 802.3at (PoE+) GE Ports,
2x SFP+ Ports
VLAN Groups
Yes
Fiber Module:
2x 10 Gbps
Power Input
Redundant DC Power DIN: 54V
Terminal Block: 12V - 54V DC%
Power Consumption
50W System,
120W PoE+ Power Budget
(supports up to 250W%)
Dimensions
(L x W x H)
10.5 x 19.1 x 1.7 inches
265 x 485 x 45mm
Weight
11.3 pounds
5.14 kg
Operating Temperature
-40° – 149°F
-40° – 65°C
Humidity
15% - 95% (non-condensing)
Warranty
1-Year limited Warranty
% The bundled PSU provides 120W of PoE power budget. If you require 250W of power budget, please add 180W PSU (ACW-623)
to your device
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

SD Switch, 24-Port


Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

SD Switch, 24-Port Specifications
LAN Interface
24x 802.3at (PoE+) GE Ports,
2x SFP+ Ports
VLAN Groups
Yes
Power Input
2x 100V – 240V AC Input,
With Power Redundancy
Integrated Power Source
850W: 3x Redundant PSU
550W: 2x Redundant PSU
Power Consumption
50W System,
850W or 550W PoE+ Power Budget
Dimensions
19.1 x 15.7 x 1.7 inches
485 x 400 x 45 mm
Weight
13.7 pounds 6.2 kg
Operating Temperature
32° – 104°F
0° – 40°C
Humidity
15% - 95% (non-condensing)
Warranty
1-Year limited Warranty
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

SD Switch, 48-Port

Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

SD Switch, 48-Port Specifications
LAN Interface
48x 802.3at (PoE+) GE Ports,
4x SFP+ Ports
VLAN Groups
Yes
Fiber Module
4x 10 Gbps
Power Input
2x 100V – 240V AC Input,
With Power Redundancy
Integrated Power source
3 x Redundant PSU
Power Consumption
100W System,
800W PoE+ Power Budget
Dimensions
19.1 x 15.7 x 1.7 inches
485 x 400 x 45 mm(L x W x H)
Weight
15.4 pounds
7.0 kg
Operating Temperature
32° - 104° F
0° - 40° C
Humidity
15% - 95% (non-condensing)
Warranty
1-Year limited Warranty

 
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Features
Networking
● Link Aggregation (LACP)
● Spanning Tree Protocol
● Port mirroring
● Inter-VLAN routing
● DHCP snooping
● Ingress Access Control LIst
● IEEE 802.1X Port-Based Authentication
● LAN Bypass (supported on 16 port switch only)
● IGMP
Hardware
● Power Input Redundancy
● PoE+ Compatible Ports
Power Management
● Multiple Power Inputs
● Port Scheduling
● Essential Port Designation
● True Power Consumption Reporting
Device Management
● Web Administrative Interface
● InControl Cloud Management
● Email Notification
● Syslog Service
● Out-of-Band management (through USB modem and Console)
* LAN Bypass (available on 16 port switch only) is a fault-tolerance feature that protects your essential
business communications in the event of a failure. The switch ports will be bridged together in case of a
power outage or hardware failure and the switch will still continue to pass traffic preventing an outage of
the switch to take down other elements in the network.
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Quick Start Functions
Connect Ethernet
Connect an RJ45 cable from an Internet-enabled router to a port on the Peplink SD Switch.
The uplink port can be either an ethernet or SFP port.
Connect an RJ45 cable from any client device to a port on the Peplink SD Switch.
Connect SFP/SFP+
Remove the protective plastic cover from the SFP/SFP+ port.
Plug a compatible fiber module into the SFP/SFP+ port.*
A list of compatible and tested SFP/SFP+ modules can be found in the following Google sheet:
https://docs.google.com/spreadsheets/d/1Vx7hZTe-gHMlVal9_0R2H1MpRjDrA05duS3nNMGBwf0/edit?u
sp=sharing
The list of SFP/SFP+ modules is not limited to the above list, but haven’t been tested.
* “SFP+" for 24/48 ports model
“SFP" for 8 and 16 ports model.


Connect to the Management Port
The management port is designed for Out-of-Band management.
The SD-Switch can be managed via this port only by default.
The management Port IP address is 192.168.1.254/24
Connect an RJ45 to the management port and a client device.
Configure the client device with an IP address in the 192.168.1.0/24 range.
Open a web browser and enter the default IP address of the management port in the address field of the
web browser ( http://192.168.1.254) to access the web interface of the Peplink Switch.
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Login with the default credentials:
Username: admin
Password: admin
(This is the default admin user login of the Peplink SD Switch The admin and read-only user password
can be changed at System>Admin Security.)
Connect to the Console Port
Access the SD-Switch via this port with CLI to get the status and info of the switch.
This is currently under development.


 
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

InControl Configuration
There are two ways to configure the Peplink Switch.
Through InControl, Peplink’s cloud-based device management and monitoring application, or through the
web admin interface.
This section describes an overview of the InControl settings and information specific to the Peplink
Switch.
For a complete overview of InControl options, please refer to our InControl documentation.
Add the Switch to InControl
1: Logon to InControl and create a separate group for your Peplink switch.
Add the switch serial number and follow the onscreen instructions.
2: Connect an active ethernet connection to one of the numbered switch ports 1 to 24.
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

3: The Switch will show online in InControl if InControl management is enabled on the switch and the
switch is able to connect to the InControl servers (the marker on the map will change from red to green).
Tip: If a device appears offline in InControl ,check the following knowledge base article for a solution:
https://forum.peplink.com/t/faq-why-does-my-device-appear-offline-on-incontrol-2-even-though-the-device
-has-an-internet-connection/
Enable InControl Cloud Management
InControl management needs to be enabled to allow the Peplink Switch to be configured through
InControl.This setting is enabled by default.
The settings can be changed in the local web interface of the Switch.
In Incontrol, browse to the Device Details page.
If it is not online, log on to the local web admin interface of the switch as described above.
Navigate to System > InControl, and then click the “Allow InControl Management” button
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Click the “Apply Changes” text on the top-right corner to save your changes.
When InControl management has been enabled you can access the web admin interface of the switch
using InControl.
Select: Settings > Remote Web Admin to connect to the Switch’s web admin interface.
InControl Group Settings
Organization > Group >Settings > Device Management
The InControl Group Settings device details shows tags, product name, uptime, online time clients and
firmware for each device.
This pageview also allows you to configure switch specific options through the “actions “drop-down list.
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.