Perfect Aire PAU13 User manual

Please check the following troubleshooting tips before calling for assistance.
PROBLEM REASON SOLUTION
Power light
PZVɈ
Unit not plugged in. Plug in unit and turn on the power / output
adjustment knob.
Wall outlet has no power. Check the circuit and fuse; try
another socket.
Check power cord. If damaged, call Consumer Services at
844-4PA-AIRE (844-472-2473)
Unit / Mist
has peculiar
smell
New unit. Air unit out in cool place for 12 hours
without the tank on the unit.
The water is dirty or stale. Thoroughly clean unit and place fresh water
in tank.
Excessive
noise
Vibration between the
O\TPKPÄLYHUKZ\YMHJL
Place the unit on a stable,
waterproof surface.
Low water level in water tank. Fill the water tank.
White dust Water contains high
mineral content.
:^P[JO[VKPZ[PSSLKVYÄS[LYLK^H[LY"JSLHU
nebulizer according to instructions.
Damp table
VYÅVVY
Unit too far from end of
[HISLVY[VVJSVZL[VÅVVY
Move unit closer to edge of table so mist
has more time to disperse. Do not place unit
VUÅVVY
)HZLV]LYÅV^LK Tank cap not securely attached or
needs replacement.
No mist /
Little mist /
Mist stuck
)HZLV]LYÄSSLK Empty base and restart.
No water in the water tank. Add water to the water tank.
The power / output
adjustment knob is not
turned on.
Rotate the power / output adjustment knob
clockwise to power the unit on.
;OLO\TPKPÄLYPZUV[VUH
ÅH[Z\YMHJL 7\[[OLO\TPKPÄLYVUHÅH[Z\YMHJL
There is scaling on the
nebulizer / transducer.
Clean the nebulizer / transducer according
to instructions.
Tank was cleaned with
wrong type of cleaner.
Use fresh water to clean the water tank
completely and then let tank dry completely.
The water level is too low. Add water to the water tank.
The water is dirty or stale. Thoroughly clean unit and place fresh water
in tank.
The nebulizer / transducer
or fan does not work.
Call Perfect Aire Consumer Services:
844-4PA-AIRE (844-472-2473)
Condensation
on windows
or machine
The room is too small or
too humid.
Turn down the mist volume or turn the unit
VɈJVTWSL[LS`
Scaling on
nebulizer /
transducer
Water is too hard. <ZLKPZ[PSSLKVYÄS[LYLK^H[LY
After reviewing the above troubleshooting tips, should you have any questions or concerns,
please call Consumer Services at 844-4PA-AIRE (844-472-2473).

Please check the following troubleshooting tips before calling for assistance.
PROBLEM REASON SOLUTION
Power light
PZVɈ
Unit not plugged in. Plug in unit and turn on the power / output
adjustment knob.
Wall outlet has no power. Check the circuit and fuse; try
another socket.
Check power cord. If damaged, call Consumer Services at
844-4PA-AIRE (844-472-2473)
Unit / Mist
has peculiar
smell
New unit. Air unit out in cool place for 12 hours
without the tank on the unit.
The water is dirty or stale. Thoroughly clean unit and place fresh water
in tank.
Excessive
noise
Vibration between the
O\TPKPÄLYHUKZ\YMHJL
Place the unit on a stable,
waterproof surface.
Low water level in water tank. Fill the water tank.
White dust Water contains high
mineral content.
:^P[JO[VKPZ[PSSLKVYÄS[LYLK^H[LY"JSLHU
nebulizer according to instructions.
Damp table
VYÅVVY
Unit too far from end of
[HISLVY[VVJSVZL[VÅVVY
Move unit closer to edge of table so mist
has more time to disperse. Do not place unit
VUÅVVY
)HZLV]LYÅV^LK Tank cap not securely attached or
needs replacement.
No mist /
Little mist /
Mist stuck
)HZLV]LYÄSSLK Empty base and restart.
No water in the water tank. Add water to the water tank.
The power / output
adjustment knob is not
turned on.
Rotate the power / output adjustment knob
clockwise to power the unit on.
;OLO\TPKPÄLYPZUV[VUH
ÅH[Z\YMHJL 7\[[OLO\TPKPÄLYVUHÅH[Z\YMHJL
There is scaling on the
nebulizer / transducer.
Clean the nebulizer / transducer according
to instructions.
Tank was cleaned with
wrong type of cleaner.
Use fresh water to clean the water tank
completely and then let tank dry completely.
The water level is too low. Add water to the water tank.
The water is dirty or stale. Thoroughly clean unit and place fresh water
in tank.
The nebulizer / transducer
or fan does not work.
Call Perfect Aire Consumer Services:
844-4PA-AIRE (844-472-2473)
Condensation
on windows
or machine
The room is too small or
too humid.
Turn down the mist volume or turn the unit
VɈJVTWSL[LS`
Scaling on
nebulizer /
transducer
Water is too hard. <ZLKPZ[PSSLKVYÄS[LYLK^H[LY
After reviewing the above troubleshooting tips, should you have any questions or concerns,
please call Consumer Services at 844-4PA-AIRE (844-472-2473).