Pestill PTSNKREP4DA User manual

Battery Powered Snake Repeller
Quick Start Guide
Product Layout
Product Description
The repeller will drive snakes away by sending a vibration tone both through the air and into the ground.
Snakes will sense that a predator is near and will stay away.
Product Specifications
Power supply: 4 x D (1.5 ) batteries
Frequency: 400Hz
Aluminium
tubing
Cap
4 x D batteries
Sound emitter

Installation
Insert the 4 x D batteries (NOT INCLUDED) into the unit as shown below, then
drive the stake into the ground in the area you wish to keep snakes away from.
1 – Open the top cap. 2 – Insert the 4 x D batteries into battery sleeve.
3 – Put battery sleeve into aluminium pipe. 4 – Close the cap.
If you have any further questions regarding the usage of this product please
contact the Kogan customer support team.