PGT Reclaimed WFD015 User manual

Assembly repuires two adults.
We suggest to place the table upside down on a blanket to protect it from scratching.
Unlock locking clips
Attach the legs using bolt (A) and washer (B)
Table legs are self adjusting moving the leg up or
down the elongated bolt hole in the table top corner block.
It is best to completely tighten each bolt when the table
is assembled in the upright position.
Tighten all bolts by using ring spanner (C), do not use power tool
ASSEMBLY INSTRUCTION
WFD015 EXTENSION TABLE
1
2
HARDWARE QUANTITY
4
4
WASHER
Ф 11 x 26 x 1.8
8
A
B
C
BOLT
Ф 10 x 40
BOLT
Ф 10 x 80
RING SPANNER
K17 x 25 x 135
1D
Format No.PD009
Page 1 of 3
LAST UPDATED: 28.04.2014

ASSEMBLY INSTRUCTION
WFD015 EXTENSION TABLE
Carefully turn the table over on to its feet, and fully tighten all bolts.
Open the table top
Remove the leaf holders
3
4
Format No.PD009
Page 2 of 3
LAST UPDATED: 28.04.2014

ASSEMBLY INSTRUCTION
WFD015 EXTENSION TABLE
Fully open the leaf and close table top.
Lock locking clips
5
6
Format No.PD009
Page 3 of 3
LAST UPDATED: 28.04.2014