Philips Respironics 1126218 User manual

Lithium ion battery with
integrated uninterruptible
power supply (UPS)
PAP battery kit
1126218 R03
LZ 5/12/2016
©2016 Koninklijke Philips N.V. All rights reserved.
1126218
Respironics Inc.
1001 Murry Ridge Lane
Murrysville, PA 15668 USA
Respironics Deutschland
Gewerbestrasse 17
82211 Herrsching, Germany
Manufactured for:

Li Ion Battery Pack
EN 001 INSTRUCTIONS FOR USE
FR 014 MODE D’EMPLOI
IT 028 ISTRUZIONI PER L’USO
DE 042 GEBRAUCHSANWEISUNG
ES 056 INSTRUCCIONES DE USO
PT 070 INSTRUÇÕES DE UTILIZAÇÃO
PT-BR 084 INSTRUÇÕES DE USO
NL 098 GEBRUIKSAANWIJZING
SV 112 BRUKSANVISNING
FI 125 KÄYTTÖOHJEET
NO 139 BRUKSANVISNING
PL 152 INSTRUKCJA STOSOWANIA
CS 166 NÁVOD K POUŽITÍ
HE 179
TR 192 KULLANIM TALİMATLARI
AR 205



1
1 Intended Use
The Lithium Ion (Li Ion) Battery Pack is an accessory intended to supply power to specified
Philips Respironics sleep therapy and noninvasive ventilation devices. The Li Ion Battery
Pack is intended to be used in home, hospitals, and institutions.
The Li Ion battery Pack is compatible with the following Philips Respironics sleep therapy
devices and noninvasive ventilation devices:
• DreamStation CPAP and BiPAP sleep therapy devices
• System One CPAP and BiPAP sleep therapy devices
• Dorma sleep therapy devices
• BiPAP AVAPS and BiPAP S/T noninvasive ventilation devices
The Li Ion Battery Pack is referred to as“the battery pack”throughout the remainder of
these instructions.
2 Package Contents
A Battery pack
B Cable
C Adapters
D Instructions for Use
E Carry case
Li Ion Battery Pack
Instructions For Use - e
A
B
C
D
E

2
3 Warnings and Cautions
Warnings
A warning statement highlights a scenario where personal injury may occur.
•This Instructions for Use document does not cover operation of your DreamStation,
Dorma, System One, BiPAP AutoSV, BiPAP AVAPS, or BiPAP S/T therapy device. When using
the battery pack with a therapy device, refer to the individual Instructions for Use provided
with each therapy device.
•Periodically inspect the power cord for damage or signs of wear. Discontinue use and
replace if damaged.
•Before use, inspect the battery pack for any damage such as a cracked or broken
enclosure. Inspect the cables to ensure that no bare wires are showing. If you notice any
unexplained changes in the performance of the battery pack, discontinue use and contact
Philips Respironics.
•To avoid strangulation hazards, ensure that all cords connected to the battery pack are
properly routed.
•This product contains small parts which can cause choking hazards.
•Do not submerge the battery pack in water or any other liquid.
•Do not use any accessories, detachable parts, or materials not recommended by
Philips Respironics. Do not connect the battery pack to any equipment not listed in this
Instructions for Use document. Incompatible parts or accessories can result in degraded
performance.
•Use only power cords and power supplies supplied by Philips Respironics for this battery
pack. Use of power cords not supplied by Philips Respironics may cause overheating or
damage to the battery pack and may result in increased emissions or decreased immunity
of the equipment or system.
•Use only approved cables and accessories with your battery pack. Misuse may affect
electromagnetic compatibility (EMC) performance and should be avoided. The device
should not be used while stacked or in close approximation to other non-approved
devices.
•Do not attempt to modify the battery pack in any way.
Cautions
A caution statement highlights a scenario where damage to the battery pack or other
equipment may occur.
•Do not place the battery pack in or on any container that can collect or hold water.
•Ensure that the therapy device is properly secured if it is being used in a portable
environment.

3
•Do not expose the battery pack to extreme temperatures (see the Specications section
for temperature specifications). If the battery pack becomes very hot or very cold, allow it
to come to room temperature before using.
•There are no user-serviceable parts inside of the battery pack; therefore, do not attempt
to disassemble or repair it.
•Do not use any cleaning products other than the products listed in this document. Use
of other products may damage or shorten the life of your battery pack.
•Medical electrical equipment needs special precautions regarding EMC and needs to
be installed according to the EMC Information section. Contact your home care provider
regarding EMC installation information.
•Mobile RF communications equipment can affect medical electrical equipment.
•Do not touch the pins or connectors.
4 Symbols
The following symbols may appear on the battery pack and accessories:
Note: If the battery pack will be used for airline travel, please consult the airline restrictions
(e.g., number of spare batteries permitted). Please familiarize yourself with airline rules.
Symbol Description Symbol Description
Li Ion battery Caution, consult
accompanying
documents.
Separate collection for
electrical and
electronic equipment
per EC Directive
2012/19/EU.
For Airline Use.
Complies with RTCA/
DO-160G section 21,
category M.
Consult accompanying
instructions for use. IP22 Drip Proof Equipment
5 Before Use
How to Contact Philips Respironics
Should you experience trouble with this equipment or require assistance setting up,
using, or maintaining the battery pack, please contact your home care provider. If you
need to contact Philips Respironics directly, call the Philips Respironics Customer Service
department at 1-724-387-4000 or [phone]. You can also use the following
addresses:

4
Respironics, Inc.
1001 Murry Ridge Lane
Murrysville, PA 15668, USA
Respironics Deutschland
Gewerbestrasse 17
82211 Herrsching, Germany
Preparing the Battery Pack for First Use and Recharging
1. Remove the battery pack, adapters, and cables from the packaging.
Note:Retain your packaging in case you ever need to return your battery pack to Philips
Respironics.
Note:A power supply is not included in the package with your battery pack. Use the
power supply provided with your therapy device.
2. Plug the power supply provided with your therapy device into an AC outlet. a
3. Plug the other end of the power supply into the battery pack. The battery pack will
begin to charge automatically. b
a b
4. The battery pack LED display will momentarily light up to show the charge level. The
first time it is turned on, the battery pack will not be fully charged. c
c
Note: Before using the battery pack for the first time, you must plug it in until it is fully
charged. This may take up to 3 hours.

5
5. Once the battery pack is fully charged, it is ready to use with your therapy device.
Indicators and Buttons
Push Button
The push button is located on the LED display of the battery pack. Push the button in
completely to check the charge level. d
d
LED Display
The battery pack uses five green LED lights to indicate the battery pack charge level. The
LEDs will be in one of three modes: steady , blinking , or off .
Discharging Charging
LED Battery Pack
Charge
LED Battery Pack
Charge
81%–100% 0%–20%
61%–80% 21%–40%
41%–60% 41%–60%
21%–40% 61%–80%
11%–20% 81%–99%
1%–10% 100%
0% See Troubleshooting
section below.

6
Troubleshooting
1. If you are attempting to charge your battery pack after it is completely depleted, it may
take a few moments for the LEDs to light up. If your battery pack is plugged in and no
lights are displayed, wait 3 to 5 minutes and press the button again.
2. If the LEDs still do not light up after attempting Step 1, your battery pack may have
been damaged or may need to be replaced. Contact Philips Respironics.
6 Operation
Using the Battery Pack with a Therapy Device
After charging, your battery pack is ready to use. It can either be disconnected from
the power supply and used as an external battery pack (standalone mode), or remain
plugged into the power supply and outlet for a continuous, fully charged battery pack
(uninterruptible power supply (UPS) mode).
Note: The first time you charge your battery pack, it must be charged in accordance with
the Before Use section. After the first charge is completed, the battery pack will charge
while connected in UPS mode.
Uninterruptible Power Supply Mode
To use the battery pack in UPS mode, keep it plugged into the power source and
connected to an outlet. This will allow you to use the battery pack continuously without
losing any charge.
Note: In order for your therapy device to detect what power is available, it is important to
connect the components in the proper order.
1. Plug the power supply into an AC outlet. e
2. Plug the other end of the power supply into the battery pack f and wait for the LEDs
to stop blinking.
e
f
3. Connect the therapy device cable to the battery pack. The therapy device cable should
correspond to the therapy device you are using.
• Some therapy devices require adapters to connect to the device cable. To use the
adapter, connect it to the end of device cable and then plug the adapter end directly
into your therapy device. g

7
• For the majority of therapy devices, the white therapy device cable can be connected
directly into the therapy device without the use of adapters. h
g h
4. Insert the strap attached to the cable through the slot in the battery pack. Pull it
through and under the battery pack. i
5. Wrap the strap around the therapy device cable, and secure it by pressing the hook side
of the strap against the loop side. j
ji
6. Connect the other end of the therapy device cable into the device.
7. The battery pack will automatically begin providing power to the therapy device. k
k
Standalone Mode
After the battery pack is charged, disconnect it from the power supply. It can now be used
with your therapy device as an external battery pack.
1. Ensure that the battery pack is charged. To confirm, completely push in the push button
located on the LED display of the battery pack. All of the LEDs should be steadily lit.

8
2. Complete Steps 2 through 6 of the Uninterruptible Power Supply Mode section. l
l
Note: Humidification is disabled for DreamStation models. When the therapy device cable
is connected to your DreamStation device, a message will appear on the device display
indicating that humidification is not supported.
Disconnecting the Battery Pack
1. Disconnect the white therapy device cable from the battery pack.
2. Disconnect the power supply from the battery pack.
3. The battery pack may be stored in the carry case for use or storage.
Note: To maximize shelf life, charge the battery pack to 100% before storing it and ensure
that all cables are disconnected.
7 Cleaning and Maintenance
Cleaning Instructions
Every two weeks of use, inspect your battery pack to see if it needs to be cleaned. You can
use any of the following cleaning agents to clean your battery pack.
• Mild detergent
• Water
• 70% Isopropyl Alcohol (Rubbing Alcohol)
• DisCide Ultra Towelettes
• 10% household bleach solution (10% household bleach, 90% water)
1. To avoid electrical shock, ensure that the battery pack is disconnected from all outlets
and power sources. Remove any cables attached to the battery pack.
2. Using one of the approved cleaning products from the list above, dampen a clean, soft
cloth and gently wipe the outside casing of the battery pack.
3. Allow the battery pack to dry completely before reconnecting it to a power source,
device, or cable.
Note: After cleaning, inspect the enclosure carefully for damage such as cracks or broken
pieces.