Philips CE130X/78 User manual

Register your product and get support at CE130
EN Quick start guide

What’s in the box
Connect wires
Main unit
(with a sleeve)
Rubber cushion
Carrying case
(includes the front panel)
Screws
x 4 pcs
Disassembly tools
x 2 pcs
Trim plate
User manual
ISO male connector
Quick start guide
b
a
c
d
aa
bcd
ab
ef
cd
gh
b
c
d
L
R
Rear Front
1Connect the supplied male connector to the unit.
2Check the car’s wiring carefully and connect them
to the supplied male connector.
1 Green/black strip Left speaker (Rear)
2 White/black strip Left speaker (Front)
3 Gray/black strip Right speaker (Front)
4 Purple/black strip Right speaker (Rear)
eRed Ignition key +12V DC when
ON/ACC
fBlue Motor/electric antenna relay
control lead/Amplifier relay
control lead
gBlack Ground
hYellow To t he +12V c ar bat ter y
which is energized at all times
3 Connecttheantennaandamplierasillustrated,if
applicable.

Mount into the dashboard
183mm
53mm
a
b
c

d
e
f

Tu rn on
1Press to turn on the unit.
Toturnofftheunit,press• for over 3 seconds.
Set clock
1Press MENU.
2Press / repeatedly until the current time is displayed.
3Rotate clockwise to set hour.
4Press toconrm.
5Rotate counterclockwise to set minute.
6Press toconrm.
Listen to radio
1Press SOURCE repeatedly to select radio mode.
2Press BAND/ to select band: [FM1],[FM2],[FM3],[AW1] or [AW2] .
3Press or to tune to a radio station manually.
The radio station is broadcast.
»
Tosearchforaradiostationautomatically,press
»or for over 3 seconds.
Store stations automatically
1Press OPTIONS repeatedly until [AUTO-STORE] displays.
2Press toconrm.
The six strongest stations of the selected band are saved in preset channel automatically.
»
Store stations manually
1Tune to a station that you want to store. (see ‘Tune to a preset station’ on page 14)
2Press and hold +/PRESET or -/RRESET to enter storing mode.
The preset number starts to blink..
»
3Press +/PRESET or -/RRESET to select radio channel.
4Press toconrm.
The station is saved in the selected channel.
»
The preset number on LCD screen lights up and remains on.
»

Play from USB
1Slide the USB socket cover marked to the left.
2Insert the USB device into the USB socket.
The unit starts to play from the USB device automatically.
»
Insert a card
1Press to release the panel.
2 Pushtheleftsideofthepanelrightward,thenpullthepanel
towards you to disengage it from the chassis.
3Insert the card into the card slot.
The unit starts playing from the card automatically.
»
Reset
You can reset the unit to its default setting.
1Detach the front panel.
2Press the reset button by using a ball-point pen or a similar tool.
Preset adjustments such as preset channels and sound
»
adjustments are erased.
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
CE130_78_QSG_V1.0
RESET