Philips AX5311 User manual

Need help? Call us!
Philips representatives are ready to help you
with any questions about your new product.
CALL US BEFORE YOU CONSIDER
RETURNING THE PRODUCT!
1-800-531-0039
or visit us on the web at www.philips.com
S
E
E
W
H
Y
I
N
S
I
D
E
I
M
P
O
R
T
A
N
T
!
Return
your Warranty
Registration Card
within 10 days
Portable CD Player
AX5311
AX5312
AX5319
User manual
Manuel d’utilisation
Manual del usuario
1
2
3
45
6
2

IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Only use attachments/accessories specified by the manufactur-
er.
10. Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer or sold with the appara-
tus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from
tip-over.
11. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as if the power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, or when the appa-
ratus has been exposed to rain or moisture, does not operate nor-
mally, or has been dropped.
12. Battery usage CAUTION – To prevent battery leakage which
may result in bodily injury, property damage, or damage to the unit:
•Install ALL batteries correctly, +and -as marked on the unit.
•Do not mix batteries (OLD and NEW or CARBON and ALKALINE,
etc.).
•Remove batteries when the unit is not used for a long time.
13. Apparatus shall not be exposed to dripping or splashing.
14. Do not place any sources of danger on the apparatus. (e.g. liquid
filled objects, lighted candles).
15. This product may contain lead and mercury. Disposal of these mate-
rial may be regulated due to environment considerations. For dis-
posal or recycling information, please contact your local
authorities or the Electronic Industries Alliance:
www.eiae.org.
EL 6597-E001: 04/01

EL6587E001 / 01-04
This warranty gives you specific legal rights. You may have other rights which vary
from state/province to state/province.
• Damage occurring to product during shipping when improperly packaged or cost
associated with packaging.
•Aproduct that requires modification or adaptation to enable it to operate in any
country other than the country for which it was designed, manufactured, approved
and/or authorized, or repair of products damaged by these modifications.
•Aproduct used for commercial or institutional purposes (including but not limited to
rental purposes).
•Products lost in shipment and no signature verification of receipt can be provided.
•Products sold AS IS or RENEWED.
Where Warranty Exchange is available:
Exchange is available in all countries where Philips officially distributes the product. In
countries where Philips does not distribute the product, the local Philips organization will
attempt to exchange the product, although there may be a delay if the appropriate
product is not readily available, or special customs processes are implied.
For Exchange in the U.S.A., Puerto Rico, or U.S.Virgin Islands…
Contact Philips Customer Care Center at:
1-800-531-0039
For Exchange in Canada…
1-800-661-6162 (French Speaking)
1-800-531-0039 (English or Spanish Speaking)
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED
BY APPLICABLE LAW,ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN
DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential
damages, or allow limitations on how long an implied warranty lasts, so the above
limitations or exclusions may not apply to you. In addition, if you enter into a service
contract agreement with the PHILIPS partnership within ninety (90) days of the date of
sale, the limitation on how long an implied warranty lasts does not apply.
MODEL # ____________________________________
SERIAL # ____________________________________
One (1)Year Free Product Exchange
PHILIPS LIMITED WARRANTY
PHILIPS CONSUMER ELECTRONICS
Philips, P.O. Box 520890, Miami,
FL 33152 [phone]
Warrants this product against defect in material or workmanship, subject to any
conditions set forth as follows:
PROOF OF PURCHASE:
You must have proof of the date of purchase to exchange the product.A sales receipt or
other document showing the product, the date that you purchased the product, as well as
the authorized retailer included, is considered such proof.
COVERAGE:
Warranty coverage begins the day you buy your product. For a period of one (1) year
from the date of purchase, if the product is determined to be defective, Philips will
exchange the defective product with a new or renewed product, at its option, at no
charge.The replacement product is covered only for the warranty period of the original
product.When the warranty on the original product expires, the warranty on all replaced
products also expires.When it is necessary for you to ship the product to Philips for
exchange, you will pay the shipping cost for shipment to Philips. Philips will pay the
shipping costs when returning a product to you.
Note:The exchange model supplied will be the most comparable one in Philips current
inventory. Shipping of your product to Philips implies intent to follow the specified
requirements of the warranty and exchange program. Product received by Philips cannot
be returned. Replacement product can only be sent if all warranty requirements are met.
Failure to follow all requirements can result in delay of exchange process.
EXCLUDED FROM WARRANTY COVERAGE
Your warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjustment of customer
controls on the product, and installation or repair of antenna systems outside of the
product.
•Product repair and/or part replacement because of improper installation, connections
to improper voltage supply, abuse, neglect, misuse, accident, unauthorized repair or other
cause not within the control of Philips.

CAUTION
Use of controls or adjustments or performance of pro-
cedures other than herein may result in hazardous radi-
ation exposure or other unsafe operation.
El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento
dependiente de dos condiciones siguientes:
1. Este aparato no puede provocar interferencia dañina, y
2. Este aparato debe aceptar cualquier interferencia recibida, incluyendo las
interferencias que pueden provocar un funcionamiento insuficiente.
Canada
English: This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference Regulations
of the Canadian Department of Communications.
Français : Cet appareil numérique n'émet pas de bruits radioélectriques dépas-
sant les limites applicables aux appareils numériques de Classe B prescrites dans
le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des
Communications du Canada.
Return your Product Registration Card today
to get the very most from your purchase.
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so
don't miss out. Complete and return your Product Registration Card at once to ensure:
*Proof of
Purchase
Returning the enclosed card
guarantees that your date of
purchase will be on file, so no
additional paperwork will be
required from you to obtain war-
ranty service.
*Product Safety
Notification
By registering your product, you'll
receive notification - directly
from the manufacturer - in the
rare case of a product recall or
safety defect.
*Additional
Benefits of
Product
Ownership
Registering your product guaran-
tees that you'll receive all of the
privileges to which you're enti-
tled, including special money-sav-
ing offers.
Know these
safetysymbols
This “bolt of lightning” indicates
uninsulated material within your
unit may cause an electrical
shock. For the safety of everyone in
your household, please do not remove
product covering.
The “exclamation point” calls
attention to features for which
you should read the enclosed
literature closely to prevent operating
and maintenance problems.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot,
fully insert.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
t
s
For Customer Use
Enter below the Serial No. which is
located on the rear of the cabinet.
Retain this information for future ref-
erence.
Model No. ______________________
Serial No. ______________________
WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.

CLASS 1
LASER PRODUCT
English
3140 115 3131 3
Printed in China
-
+
+
STOP
PROGRAM
MODE
/
+
#
@^
!
$
%
&
1
1
2
4
7
5
0
9
3
6
8
repeat all
shuffle resume
program
DBB
vol
POWER SAVE
ESP ON
Meet Philips at the Internet
http://www.philips.com
PHILIPS CONSUMER ELECTRONICS NORTH AMERICA
Knoxville, Tennessee 37914-1810, U.S.A.

STOP
PROGRAM
MODE
/
+
repeatall
shuffleresume
program
DBB
vol
STOP
PROGRAM
MODE
/
+
repeatall
shuffleresume
program
DBB
vol
p
1
3#
4 HOLD ➟ OFF 5 PLAY 2; 6VOL
!!!
2
STOP
PROGRAM
MODE
repeat all
shuffle resume
program
DBB
vol
2
STOP
PROGRAM
MODE
/
+
repeatall
shuffleresume
program
DBB
vol
POWERSAVE
ESP ON
/
+
/
+
1.
1.
2.
2.
+
-
+
-
OP
/
+
English CONTROLS
Controls ( see figure 1 )
1LINE OUT/p........3.5 mm headphone socket, socket to connect the player to
another audio input of an additional appliance, remote
control socket (not on all versions)
22; ......................switches the player on, starts or pauses CD play
3MODE .................selects the different playing possibilities: shuffle,
shuffle repeat all, repeat, repeat all and SCAN
4PROGRAM ..........programs tracks and reviews the program
5............................display
6∞.......................skips and searches CD tracks backwards
7§.......................skips and searches CD tracks forwards
8STOP ..................stops CD play, clears a program or switches the player off
9DBB.....................switches the bass enhancement on and off. This button also
switches acoustic feedback (the beep) on/off when it is
pressed for more than 2 seconds
0VOL −−//++..............adjusts the volume
!4.5V DC...............socket for external power supply
@OPEN 2..............opens the CD lid
#ESP ON /
POWER SAVE .......to select between the battery powersave mode and
Electronic Skip Protection (ESP). ESP ensures continuous
CD playback regardless of vibrations and shocks
$OFF......................switches RESUME and HOLD off
RESUME .............stores the last position of a CD track played
HOLD...................locks all buttons on the set only
%............................typeplate
^............................battery compartment
&............................AAA battery door
This set complies with the radio interference requirements of the
European Union.

Batteries (supplied or optionally available)
For convenience, this model is designed with 2 different detachable battery doors.
This allows you to operate the player using 2 choices of battery size. You can use
the following batteries with this CD-player:
•alkaline batteries type AAA (LR03, UM4) or AA (LR6, UM3) preferably
Philips.
Notes:–
Old and new or different types of batteries should not be combined.
– Remove batteries if they are empty or if the player is not going to be used for
a long time.
Inserting AAA (LR03, UM4) or AY 3363 batteries
1Open the AAA battery door.
2Insert AAA batteries as shown onto the back of the
door.
3Replace the battery-loaded AAA door back onto the
set.
Inserting AA (LR6, UM3) batteries
To double playback time, insert AA batteries into the bat-
tery compartment and use the AA marked battery door.
•Open the battery compartment and insert either 2
normal or alkaline batteries.
Battery indication
The approximate power level of your batteries is shown in the display.
Battery full
Battery two-thirds full
Battery one-third full
Battery dead or empty. When the batteries are
dead or empty, the symbol flashes, bAtt
is displayed, and the beep tone sounds
repeatedly.
+
-
+
-
AA SIZE
LR6 / UM3
-
+
LR03/AAA /UM4
+
AAA (LR03, UM4)
AA (LR6, UM3)
CONTROLS / POWER SUPPLY
Remote Control AY 3785 ( see figure 2 )
1p.........................3.5 mm headphone plug to connect to headphones socket
22; ......................switches the set on, starts playback and interrupts playback
39.........................stops playback and switches the set off
4∞/ §...............skips and searches forward / backward tracks
5HOLD...................locks all buttons (on the remote control only)
6VOLUME −−//++......adjusts the volume
Connecting the remote control
Use the AY 3785 cord remote control.The buttons
on the remote control have the same functions as
the corresponding buttons on the set.
1Press 9twice to switch off the set.
2Firmly connect the remote control to LINE
OUT/pon the set.
3Firmly connect the headphones to the plug on
the remote control.
4On the remote control press 2; to switch on the set and to start playback.
5Adjust the volume on the CD player or your remote control.
Notes: – Check the HOLD switch on the remote control is adjusted to the off
position if you wish to operate the player using the remote control.
p
STOP
PROGRAM
MODE
/
+
repeatall
shuffleresume
program
DBB
vol

Handling instructions
•Recharging already charged or half-charged batteries will shorten their
lifetime. We therefore recommend that you let the rechargeable ECO-PLUS
NiMH battery run till it is completely empty before you recharge it.
•To avoid a short circuit, do not let the battery touch any metal object.
•If the battery becomes empty soon after recharging, then either its contacts
are dirty or it has reached the end of its lifetime.
Mains adapter (supplied or optionally available)
Use only the AY 3170 adapter (4.5 V / 300 mA direct
current, positive pole to the center pin). Any other product
may damage the player.
1Make sure the local voltage corresponds to the power
adapter’s voltage.
2Connect the power adapter to the 4.5V DC socket of
the player and to the wall socket.
Note: Always disconnect the adapter when you are not using it.
Environmental information
•All redundant packing material has been omitted. We have done our utmost to
make the packaging easily separable into two mono materials: cardboard (box)
and polyethylene (bags, protective foam sheet).
•Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packing materials, exhausted batteries and old equipment.
POWER SUPPLY / GENERAL INFORMATION
Average playing time of batteries under normal conditions
Battery type ESP on Power Save
Alkaline AA 24 hours 42 hours
Alkaline AAA 10 hours 16 hours
Rechargeable ECO-PLUS NiMH battery 8.5 hours 13 hours
Batteries contain chemical substances, so they should be disposed
of properly.
ECO-PLUS NiMH battery information (for versions supplied with the
rechargeable ECO-PLUS NiMH battery AY 3363)
Recharging works only on players supplied with the rechargeable ECO-PLUS
NiMH battery AY 3363.
Recharging the ECO-PLUS NiMH battery on board
1Insert the rechargeable ECO-PLUS NiMH battery AY 3363.
2Connect the mains adapter to the 4.5V DC socket of
the player and then to the wall socket.
yis pulsing.
•Recharging stops after a maximum of 7 hours, or when you start playback.
3When the battery is fully recharged, FULL appears
in the display.
Notes: – It is normal for the batteries to become warm
during recharging.
– If the batteries become too warm, recharging
will be interrupted for approximately 30 min-
utes .
– To ensure proper recharging on board, take care that contacts are clean.
– Use only the ECO-PLUS NiMH battery AY 3363.
4.5
VDC

GENERAL INFORMATION
CD player and CD handling
•Do not touch the lens Aof the CD player.
•Do not expose the unit, batteries or CDs to humidity,
rain, sand or excessive heat (caused by heating
equipment or direct sunlight).
•You can clean the CD player with a soft, slightly
dampened, lint-free cloth. Do not use any cleaning
agents as they may have a corrosive effect.
•To clean the CD, wipe it in a straight line from the
center toward the edge using a soft, lint-free cloth. A
cleaning agent may damage the disc! Never write on a CD or attach a sticker
to it.
•The lens may cloud over when the unit is moved suddenly from cold to warm
surroundings. Playing a CD is not possible then. Leave the CD player in a warm
environment until the moisture has evaporated.
•Active mobile phones in the vicinity of the CD player may cause malfunctions.
•Avoid dropping the unit as this may cause damage.
Headphones HE570
•Connect the supplied headphones to the LINE OUT/p
socket of the player.
Note: LINE OUT/pcan also be used for
connecting this set to your HiFi system.To adjust the
sound and volume, use the controls on the connected
audio equipment and on the CD player.
IMPORTANT!
Hearing safety: Do not play your headphones at a high volume. Hearing experts advise
that continuous use at high volume can permanently damage your hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard
and it is illegal in many countries. Even if your headphones are an open-air type
designed to let you hear outside sounds, do not turn up the volume so high that you
cannot hear what is going on around you.
+
In-car use (connections supplied or optionally available)
Only use the AY 3545 or AY 3548 car voltage converter (4.5 V DC, positive pole to
the centre pin) and the AY 3501 car cassette adapter. Any other product may dam-
age the set.
1Put the set on a horizontal, vibration-free and
stable surface. Make sure it is in a safe place,
where the set is neither a danger nor an
obstacle to the driver and the passengers.
2Plug the voltage converter into the
cigarette lighter socket (only for 12 V car
battery, negative grounding), then connect
the wired end with 4.5V DC input socket on the
set.
3If necessary, clean the cigarette lighter socket to obtain a good electrical
contact.
4Turn down the volume and connect the cassette adapter plug to LINE OUT/p
on the set.
5Carefully insert the cassette adapter into the car radio’s cassette compartment.
6Make sure the cord does not hinder your driving.
7Decrease the volume on the set if necessary. Start playback on the set and
adjust the sound with the car radio controls.
•Always remove the voltage converter from the cigarette lighter socket
when the set is not in use.
Note: If your car radio has a LINE IN socket, it is better to use it for the
car radio connection instead of the adapter cassette. Connect the signal
lead to this LINE IN socket and to LINE OUT/pon the set.
4,5 V DC
12 V DC
STOP
PROGRAM
MODE
/
+
repeatall
shuffleresume
program
DBB
vol

CD PLAY
Playing a CD
This CD-player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.
1Push the OPEN 2slider to open the player.
2Insert an audio CD, printed side up, by pressing the
CD onto the hub.
3Close the player by pressing the lid down.
4Press 2; to switch the player on and start playback.
yThe current track number and elapsed playing
time are displayed.
•You can pause playback by pressing 2;.
yThe time at which playback was paused starts
flashing.
•You can continue playback by pressing 2; again.
5Press STOP to stop playback.
yThe total number of tracks and the total playing
time of the CD are displayed.
6Press STOP again to switch the player off.
•To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
Note: If there is no activity, the set will automatically
switch off after a while to save energy.
OP
/
+
STOP
repeat all
sh
uffle resume
Playback information
•If a CD-Recordable (CD-R) or a CD-Rewritable (CD-
RW) is not recorded properly, NF dISC is
displayed, indicating that the CD has not been
finalized. In that case, use FINALIZE on your CD
recorder to complete the recording.
•When playing a CD-Rewritable (CD-RW), please note
that it takes 3–15 seconds after pressing 2; for
sound reproduction to start.
•Playback will stop if you open the CD lid.
•While the CD is read, 1 --:-- flashes in the display.
Volume and bass
Volume adjustment
•Adjust the volume by using VOL −−//++
on the CD player
or your remote control.
Bass adjustment
•Press DBB to switch the bass enhancement on or
off
yis shown if the bass enhancement is
activated.
vol