Philips AZ1030/01 User manual

AZ 1030
CD Radio Cassette Recorder
AZ1030/01 eng 31/5/01 14:46 Page 1

2
Es necesario que lea cuidadosamente su instructivo de manejo.
Descripción: Radiograbadora con CD
Modelo: AZ 1030/01, AZ1030/16
Alimentación: 110–127/220–240 V; ~50–60 Hz
Consumo: 11 W
Importador: Philips Mexicana, S.A. de C.V.
Domicilio: Norte 45, # 669, Col. Industrial Vallejo
Localidad y Telefono: C.P. 02300 México D.F., Tel. [phone]
Exportador: Philips Hong Kong Ltd.
País de Origen: China
Nº de Serie: _______________________________
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
México
AZ 1030 /01 page 2
AZ1030/01 eng 31/5/01 14:46 Page 2

3
English
Français
Español
Controls..................................4
Power supply .........................5
Basic functions ......................6
Radio......................................6
CD player...........................7–9
Cassette recorder..........10–11
General information.............12
Troubleshooting ...................13
Comandes ............................14
Alimentation ........................15
Fonctions de base................16
Radio....................................16
Lecteur de CD................17–19
Platine cassette.............20–21
Informations général ...........22
Recherche de pannes ..........23
Controles..............................24
Fuente de alimentación.......25
Funciones básicas................26
Radio....................................26
Reproductor CD .............27–29
Grabadora......................30–31
Información general.............32
Localización de averías .......33
EnglishFrançaisEspañol
Português
Controles..............................44
Alimentação.........................45
Funções básicas...................46
Rádio....................................46
Toca-discos CD..............47–49
Tape deck.......................50–51
Informações gerais..............52
Guia de falhas .....................53
Português
Guarantee and Service valid for
Australia ............................54
Guarantee and Service for
New Zealand.....................55
Garantía para
México.........................56–57
Certificado de garantia para o
Brasil ..................................58
Guarantees
Guarantees
∑
Controls..................................4
Power supply .........................5
Basic functions ......................6
Radio......................................6
CD player...........................7–9
Cassette recorder..........10–11
General information.............12
Troubleshooting ...................13
∑
AZ 1030 /01 page 3
AZ1030/01 eng 31/5/01 14:46 Page 3

CONTROLS
4
English
BASIC FUNCTIONS
1POWER:
CD, TAPE, BAND ....selects the sound source
2DBB.......................enhances the bass
3VOLUME ...............adjusts the volume level
4p...........................3.5mm headphone socket
(back of the set)
Note: Connecting the headphones will switch
off the speakers.
5CASSETTE RECORDER
PAUSE ;...............interrupts recording or
playback
OPEN·STOP /9..stops the tape and opens
the cassette compartment
SEARCH 6...........rewinds the tape
SEARCH 5...........fast forwards the tape
PLAY 1.................starts playback
RECORD 0...........starts recording
RADIO
6TUNING ................tunes to radio stations
1BAND: FM, MW...selects the wave band
7CD PLAYER
/OPEN................opens the CD
compartment
9...........................stops CD play and erases
the program
2; ........................starts and interrupts CD
play
§.........................skips and searches
forward
∞.........................skips and searches
backward
CD MODE..............selects the different CD
playing modes and
programs tracks
8Display
AZ 1030 /01 page 4
AZ1030/01 eng 31/5/01 14:46 Page 4

POWER SUPPLY
5
Open the battery compartment of the set and insert 6 batteries,
type R20, UM-1 or D-cells (preferably alkaline).
Remove batteries if they are flat or if the set is not going to be
used for a long time.
Batteries contain chemical substances, so they should be
disposed of properly.
1Check whether the mains voltage as shown on the type plate
corresponds to your local mains voltage. If it does not, consult
your dealer or service organization.
The type plate is located
on the bottom of the set.
2If the set is equipped with a VOLTAGE selector A, set this
selector to the local mains voltage.
3Connect the mains cable to the AC MAINS socket and the wall
socket. This switches on the mains supply.
The mains cable is
inside the battery compartment.
The battery supply will be switched off when the set is connected
to the mains. To change over to battery supply, pull out the plug
from the unit’s AC MAINS socket.
To disconnect the set from the mains completely, remove the
mains plug from the wall socket.
Mains
Batteries (optional)
English
AZ 1030 /01 page 5
Environmental information
All redundant packing material has been omitted. We have done our utmost to make the
packaging easily separable into three mono materials: cardboard (box), polystyrene foam (buffer)
and polyethylene (bags, protective foam sheet).
Your set consists of materials which can be recycled if disassembled by a specialized company.
Please observe the local regulations regarding the disposal of packing materials, exhausted
batteries and old equipment.
AZ1030/01 eng 31/5/01 14:46 Page 5

6
English
Set the POWER slider to the desired sound source:
CD, TAPE, or BAND (for radio).
The set is switched off when the POWER slider is set to OOFFFF/TAPE
and the keys of the tape deck are released.
Note: If you use batteries, switch the set off after use. This will
avoid unnecessary power consumption.
Adjust the volume using the VOLUME control.
Increase and decrease the bass level by pressing DBB.
The bass level can also be emphasised if you place the set against
wall or shelf. Do not cover any vents; leave sufficient room around
the unit for ventilation.
1Set the POWER slider to FM or MW to select the desired
wave band.
2Tune to the desired radio station by using the TUNING wheel.
Improving RADIO reception
For FM stations, pull out the telescopic antenna. To improve the
signal, incline and turn the antenna. Reduce its length if the signal
is too strong (very close to a transmitter).
For MW stations, direct the built-in antenna by turning the whole
set. The telescopic antenna is not needed.
Radio – tuning to radio stations
Adjusting volume and sound
Switching the set on and off
BASIC FUNCTIONS RADIO
AZ 1030 /01 page 6
AZ1030/01 eng 31/5/01 14:46 Page 6

CD PLAYER
7
English
1Set the POWER slider to CD.
2Press /OPEN to open the CD compartment.
3Insert an audio CD (printed side up) and close the CD
compartment.
™The CD player starts and scans the contents list of the CD.
Then, the CD player stops. Display indication: the total
number of tracks.
4Press the 2; button to start CD play.
™Display indication: the current track number.
5Press the 9button to stop CD play.
™Display indication: the total number of tracks.
You can interrupt CD play by pressing 2;. Continue CD play by
pressing the button again.
™Display indication: the current track number (flashing).
Note: CD play will also stop if:
– you open the CD compartment,
– the end of the CD is reached, or
– you move the
POWER slider.
If you make a mistake when operating the CD player, or if the
CD player cannot read the CD, the display shows Eor no. (See
”TROUBLESHOOTING”.)
If you press 2; and there is no CD inserted, the display
shows no.
Playing a CD
AZ 1030 /01 page 7
AZ1030/01 eng 31/5/01 14:46 Page 7

CD PLAYER
8
English
Selecting another track
Briefly press the ∞or §button once/several times to skip to the
beginning of the current, previous or subsequent track(s).
During CD play:
CD play continues automatically with the selected track.
When CD play is stopped:
Press 2; to start CD play.
™Display indication: the selected track number.
Searching for a passage during CD play
1Hold down the ∞or §button to find a particular passage in a
forward or backward direction.
™CD play continues at a low volume.
2Release the button when you have reached the desired passage.
Note: In the different CD modes or when playing a program, searching
is only possible within the particular track.
1During CD play press CD MODE repeatedly to cause the display
to show the different playing modes.
™SHUFFLE: All tracks of the CD (or program) are played in
random order.
™SHUFFLE REPEAT ALL: All tracks of the CD (or program) are
played repeatedly in random order.
™REPEAT: The current track is played repeatedly.
™REPEAT ALL: The entire CD (or program) is played repeatedly.
2After 2 seconds of flashing display indication, CD play starts in
the chosen mode.
3To return to normal CD play, press CD MODE until the display
indication disappears.
CD MODE: Shuffle and Repeat
Search backward ∞and forward §
AZ 1030 /01 page 8
AZ1030/01 eng 31/5/01 14:46 Page 8

CD PLAYER
9
You can select a number of tracks and store these in the memory
in the desired sequence. You can store any track more than once.
A maximum of 20 tracks can be stored in the memory.
1When CD play is stopped, select the desired track with ∞or
§.
2As soon as the number of the desired track is displayed, press
CD MODE to store the track in the memory.
™PROGRAM appears on the display. Plights up briefly, then the
number of the stored track is shown.
3Select and store all desired tracks in this way.
4You can review your settings by pressing and holding CD MODE
for more than 1 second.
™The display shows all stored track numbers in sequence.
If you try to store more than 20 tracks, the display shows F.
Press 2; to play the program.
From the stop position, press 9.
™no lights up briefly, PROGRAM disappears and your program
is erased.
Note: The program will also be erased if you:
– interrupt the power supply,
– open the CD compartment, or
– move the
POWER slider.
Erasing the program
Playing the program
CD MODE: Programming track numbers
English
AZ 1030 /01 page 9
AZ1030/01 eng 31/5/01 14:46 Page 9

CASSETTE RECORDER
10
English
1Set the POWER slider to TAPE.
2Press OPEN·STOP /9to open the cassette compartment.
3Insert a recorded cassette with the open side upwards and close
the cassette compartment.
4Press PLAY 1to start playback.
5Press 6or 5to rewind or fast forward the tape.
6To stop the tape press OPEN·STOP /9.
Note: The keys are released at the end of the tape.
Recording is permissible insofar as copyright or other rights of
third parties are not infringed upon.
For recording on this set you should use a cassette of the type
NORMAL (IEC type I). This deck is not suitable for recording on
cassettes of the type CHROME (IEC type II) or METAL (IEC
type IV).
The recording level is set automatically. The controls VOLUME and
DBB do not affect the recording.
At the very beginning and end of the tape, no recording will take
place in the 7 seconds during which the leader tape passes the
recorder heads.
Protecting tapes from accidental erasure
Keep the cassette side to be protected in front of you and snap off
the left tab. Now, recording on this side is no longer possible.
To record again on this side of the cassette, cover the opening with
a piece of adhesive tape.
General information on recording
Playing a cassette
AZ 1030 /01 page 10
AZ1030/01 eng 31/5/01 14:46 Page 10

CASSETTE RECORDER
11
1Set the POWER slider to CD.
2Insert a CD and, if desired, program the track numbers.
3Press OPEN·STOP /9to open the cassette compartment.
4Insert a blank, unprotected, cassette and close the cassette
compartment.
5Press RECORD 0to start recording.
™Playing of the CD or program starts automatically.
6For brief interruptions press PAUSE ;. Press the PAUSE ;key
again to resume recording.
7To stop recording, press OPEN·STOP /9.
Note: the recording can be started from different positions:
– if the CD player is in pause mode, recording will start
from this very position (use
∞ or § );
– if the CD player is in stop mode, recording will start from
the beginning of the CD or program.
1Tune to the desired radio station (see ”RADIO”).
2Press OPEN·STOP /9to open the cassette compartment.
3Insert a blank, unprotected, cassette and close the cassette
compartment.
4Press RECORD 0to start recording.
5For brief interruptions press PAUSE ;. To resume recording
press the PAUSE ;key again.
6To stop recording, press OPEN·STOP /9.
Recording from the radio
Recording from the CD player – CD synchro start
English
AZ 1030 /01 page 11
AZ1030/01 eng 31/5/01 14:46 Page 11

GENERAL INFORMATION
12
English
Do not expose the set, batteries, CDs, or tapes to humidity,
rain, sand, or excessive heat (caused by heating equipment or
direct sunlight).
The mechanical parts of the set contain self-lubricating bearings
and must not be oiled or lubricated!
You can clean the set with a soft, slightly dampened, lint-free cloth.
Do not use any cleaning agents as they may have a corrosive effect.
To ensure proper recording and playback quality, clean parts
A, Band Cafter approximately 50 hours of operation. Use a
cotton swab slightly moistened with alcohol or head-cleaner fluid.
Press PLAY 1and clean the rubber pressure roller A.
Press PAUSE ;and clean the capstan Band the heads C.
Note: Cleaning of the heads C can also be done by playing a
cleaning tape once.
The lens Xof the CD player should never be touched. Always
keep the CD compartment closed to avoid dust on the lens.
The lens may cloud over when the set is suddenly moved from cold
to warm surroundings. Playing a CD is not possible then. Leave the
CD player in a warm environment until the moisture evaporates.
To take the CD out of its box easily, press the centre spindle while
lifting the CD.Always pick up the CD by the edge and put it back
in its box after use.
To clean the CD, wipe it in a straight line from the center toward
the edge using a soft, lint-free cloth. A cleaning agent may
damage the disc!
Never write on a CD or attach a sticker to it.
CD player and CD handling
Tape deck maintenance
General maintenance
AZ 1030 /01 page 12
AZ1030/01 eng 31/5/01 14:46 Page 12

TROUBLESHOOTING
13
Problem Possible cause Solution
No sound, VOLUME is not adjusted. Adjust volume.
no power Headphones are connected. Disconnect headphones.
Mains cable is not securely connected. Connect mains cable properly.
Batteries are flat. Insert fresh batteries.
Batteries are inserted incorrectly. Insert batteries correctly.
Trying to change over from mains to Remove the mains plug from the
battery supply without removing the plug. unit’s AC MAINS socket.
No reaction to Electrostatic discharge. Disconnect the set from power supply,
operation of any keys reconnect after a few seconds.
Poor radio reception Weak radio signal. Direct the antenna for optimum
reception.
Interference caused by electrical equipment Keep the radio away from electrical
like TVs, computers, engines, etc. equipment.
no or Eindication The CD is badly scratched or dirty. Replace or clean the CD.
No CD is inserted. Insert a CD.
The CD is inserted upside down. Insert CD with label facing up.
The laser lens is steamed up. Wait until the lens has cleared.
The CD skips tracks The CD is damaged or dirty. Replace or clean the CD.
SHUFFLE or PROGRAM is active. Switch off SHUFFLE or PROGRAM.
Poor cassette Dust and dirt on the heads, capstans or Clean heads, capstans, and pressure
sound quality pressure rollers. rollers.
Use of unsuitable cassette types Only use NORMAL type cassettes for
(METAL or CHROME) for recording. recording.
Recording does Cassette tab(s) may be snapped off. Apply a piece of adhesive tape over
not work the opening.
English
AZ 1030 /01 page 13
WARNING
Under no circumstances should you try
to repair the set yourself as this will
invalidate the guarantee. Do not open the
set as there is a risk of electric shock.
If a fault occurs, first check the points listed
below, before taking the set for repair.
If you are unable to solve a problem by
following these hints, consult your dealer or
service center.
AZ1030/01 eng 31/5/01 14:46 Page 13