Philips AZ1047/61 User manual

AZ1047CD Soundmachine
User manual
Register your product and get support at
www.philips.com/welcome

1
1
3
2
5
6
8
5
5
@
#
$
0
9
7
4
!
5

%
6 x R14 • UM-2 • C-CELLS
2
---

A AB
C
X
MP3
3
4
PROG
5
MP3
6
MP3
ALB
7
MP3
8
9
---

English Controls/Power Supply
Congratulations on your purchase and
welcome to Philips!
To fully benefit from the support that Philips
offers, register your product at
www.philips.com/welcome.
Supplied Accessories
– AC power cord
Top/Front panels (See 1)
1 VOLUME – adjusts volume level
2 DBB – turns the bass enhancement on/off
3 CASSETTE RECORDER keys:
;
– pauses playback or recording
9
/
–
stops the tape or recording;
– opens the cassette holder
56
– fast forward s/rewinds tape
1
– starts playback
0
– starts recording
4 Display – shows the CD functions
5 9
– stops CD playback;
– erases a CD program
2;
– starts or pauses CD playback
§ ∞
– selects the next/previous track
– fast searches forwards/backwards (press and
hold the button) within the current track
6PROG – programs tracks and reviews the
program
MODE – selects different play modes:
REPEAT or SHUFFLE (random
order)
7LIFT TO OPEN – opens/closes the CD
door
8ALBUM +/- – selects an album for an MP3-
CD
9TUNING +/- – tunes to radio stations
0 MP3 LINK – inlet for an MP3 device
! BAND –
selects waveband: FM or MW
Back/Bottom panels
(See 1 and 2)
@Telescopic antenna
– improves FM reception
#AC MAINS~ – inlet for power cord
$
Source selector:CD,TUNER, MP3
LINK ,TAPE/OFF
– selects CD, radio, MP3 or tape source of
sound
– powers off switch
%Battery door – open to insert 6 x 1.5V
R-14/UM-2/C-cells batteries
CAUTION
Visible and invisible laser radiation. If
the cover is open, do not look at the
beam.
High voltage! Do not open.You run
the risk of getting an electric shock.
The machine does not contain any
user-serviceable parts.
Modification of the product could
result in hazardous radiation of
EMC or other unsafe operation.
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
Batteries (not included)
1Open the battery door and insert 6 batteries,
type R-14,UM-2 or C-cells with the
correct polarity as indicated by the "+" and
"–" symbols inside the compartment. (See 2)
---

Power Supply General Operation/Radio
2Replace the battery door, making sure the
batteries are firmly and correctly in place.The
set is now ready to operate.
• Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or
cause the batteries to burst:
• Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same type
for the set.
• When inserting new batteries, do not try to mix
old batteries with the new ones.
• Remove the batteries if the set is not to be used
for a long time.
Batteries contain chemical substances, so
they should be disposed of properly.
Using AC power
1Check if the power voltage, as shown on
the type plate located on the bottom
of the set, corresponds to your local power
supply. If it does not, consult your dealer or
service center.
2Connect the power cord to the AC
MAINS~ inlet and the wall socket.The set is
now connected and ready for use.
3To switch the set off completely, withdraw the
power cord from the wall socket.
4Install the unit near the AC outlet and where
the AC power plug can be easily reached.
• Disconnect the power cord from the wall
socket to protect your set during heavy
thunderstorms. Children could seriously injure
themselves as the free end of the cable may
still be live if only the connector is removed
from the MAINS socket at the back of the
unit.
The type plate is located on the
bottom of the set.
Helpful hints:
–To avoid unnecessary energy consumption,
always adjust the
Source selector to TAPE/
OFF
after using the set. and check that the
tape deck keys are released.
General Operation
Switching on and off and selecting the
function
1To select your sound source, adjust the
Source selector to CD,
TUNER ,MP3
LINK or TAPE/OFF .
2To switch off the set, adjust the Source
selector to
TAPE/OFF position and check
the cassette keys are released.
Adjusting volume and sound
Adjust the sound with the VOLUME and
DBB controls.
Radio reception
1Adjust the Source selector to TUNER .
2Adjust BAND to select your desired
waveband, MW or FM.
3Tu r n TUNING to tune to a station.
Helpful hints:
To improve radio reception
• For FM, extend, incline and turn the
telescopic antenna for best reception. Reduce
its length if the signal is too strong.
• For MW,the set uses a built-in antenna.
Direct this antenna for best reception by
turning the whole set.
---

Playing a CD
• This CD player plays Audio Discs including
CD-Recordables (CD-R), CD-Rewritables
(CD-RW), and MP3-CD.
• CD-ROM, CD-I, CDV,VCD, DVD or
computer CDs are not possible for playback.
IMPORTANT!
CDs encoded with copyright protection
technologies by some record companies may
be unplayable by this product.
1Adjust the Source selector to CD.
2Open the CD door, and insert a CD with
the printed side facing up, then press the CD
door gently to close.
➜Display shows ---, and later the total
number of tracks. (See 3)
3Press
2; to start playback.
4To pause playback, press
2; .
➜
Display: 2flashes. (See 4)
5To resume, press
2; again.
6To stop CD playback, press
9 .
Helpful hints:
CD play will also stop when:
–you open the CD door;
–you select TUNER ,MP3 LINK or
TAPE/OFF sound source;
–the CD has reached the end.
Selecting a different track
1Press ∞/§ once or repeatedly until the
desired track number in the current album
appears in the display.
• Press
ALBUM +/- to select the desired
album, and then press ∞ or § to select the
desired track number in the selected album.
2In the pause/stop position, press 2; to start
playback.
Finding a passage within a
track
1During playback, press and hold ∞or §.
➜ The CD is played at high speed and with
reduced volume.
2When you recognize the passage you want,
release ∞or §to resume normal playback.
Helpful hints:
–When your searching reaches the end of the
last track, the CD goes to stop mode.
Programming track
numbers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1In the stop position, press PROG to activate
programming.
➜Display: PROG and P01 flash. (See 5)
2Press
∞ or § to select your desired track
number in the current album.
• Press
ALBUM +/- to select the desired
album, and then press ∞ or § to select the
desired track number in the selected album.
3Press PROG to store the desired track
number.
➜Display: PROG and P02 flash for you
to program the next track.
4Repeat steps 2to 3to select and store all
desired tracks in this way.
➜If you attempt to store more than 20
tracks, no track can be selected and the
display shows PROG and -
---.
5To play your program, press
2; .
Helpful hints :
–When playback of your program comes to the
stop position, your set will return to normal
playback.To re-enter program mode, press
PROG in the stop position.
CD Player

Reviewing the program
In the stop position, press PROG repeatedly
to see your stored tracks.
Erasing a program
You can erase the contents of the memory
by:
– in the stop position, press PROG to enter
program mode, and then press
9 ;
– selecting
TUNER or TAPE/OFF sound
source;
– opening the CD door.
Different play modes:
REPEAT and SHUFFLE
(See 6,7)
REPEAT
You can play the current track or the whole
disc repeatedly, and combine REPEAT modes
with PROGRAM.
–plays the current track continuously
ALB –plays the current album continuously
ALL –repeats the entire CD/program
1To select play mode, press MODE once or
more.
➜ The display shows , ALB (See
8)or ALL.
2Press 2; to start playback if in the stop/pause
position.
3To return to normal playback, press MODE
repeatedly until the modes are no longer
displayed.
–You can also press 9to cancel your play
mode.
SHUFFLE
You can play all the tracks in random order.
1In the stop position, press MODE once or
more.
➜ Display shows .
2To switch off shuffle play, press 9.
CD Player

Cassette playback
1Adjust the Source selector to TAPE .
2Press
9 /to open the cassette holder and
insert a cassette, and close the deck.
3Press
1 to start playback.
4To pause playback, press 8.To resume, press
the key again.
5To stop the tape, press
9 /.
Fast forwarding/rewinding
1Press 5 /6until you reach your desired
passage.
2Press
9 /to stop fast forwarding/rewinding.
Helpful hints:
–During playback, the keys are automatically
released at the end of a tape and the set is
switched off (unless
8 mode has been
activated.)
–During fast forwarding/rewinding, the keys will
not be released at the end of a tape.To switch
off the set, make sure the cassette keys are also
released.
General information on recording
• Recording is permissible insofar as copyright
or. other rights of third parties are not
infringed.
• For recording, use only NORMAL type
cassettes (IEC type I) on which the tabs have
not yet been broken.This deck is not suited
for recording on CHROME (IEC II) or
METAL (IEC IV) type cassettes.
• The best recording level is set automatically.
Altering the VOLUME or DBB will not
affect the recording.
• To protect a tape from accidental erasure,
break out the tabs. If you wish to record again,
cover the tabs with a piece of adhesive tape.
CD synchro start recording
1Select CD source.
2Insert a CD, or if desired, program track
numbers.
3Press
9 / to open the cassette holder. Insert
a blank tape and close the deck.
4Press
0 to start recording.
• Playing of the disc/programme starts
automatically from the beginning.You don’t
need to manually start the disc player.
5For brief interruptions, press 8.To resume
recording, press 8again.
6To stop recording, press
9 /.
Recording from the Radio
1Select
TUNER source.
2Tune to the desired radio station (see Radio
reception).
3Follow steps 3-6 under CD synchro start
recording.
Cassette Recorder

CD player and CD handling
• If the CD player cannot read CDs correctly,
use a cleaning CD to clean the lens before
taking the set to repair.
• The lens of the CD player should never be
touched!
• Sudden changes in the surrounding
temperature can cause condensation on the
lens of your CD player. Playing a CD is then
not possible. Do not attempt to clean the
lens but leave the set in a warm environment
until the moisture evaporates.
• Always close the CD-tape door to avoid dust
on the lens.
• To clean the CD, wipe in a straight line from
the center towards the edge using a soft, lint-
free cloth. Do not use cleaning agents as they
may damage the disc.
• Never write on a CD or attach any stickers
to it.
Tape deck maintenance
To ensure quality recording and playback of
the tape deck, clean parts A,Band Cas
shown, once a month. Use a cotton bud
slightly moistened with alcohol or a special
head cleaning fluid to clean the deck.
1Open the cassette holder by pressing
9 /.
2Press
1 and clean the roller C.
3Press 8 and clean the heads A, and the
capstan B.
4After cleaning, press
9 /.
➜Cleaning of the heads can also be done
by playing a cleaning cassette through
once.
Safety information
• Place the set on a flat, hard and stable surface
so that the system does not tilt.
• Where the MAINS plug or an appliance
coupler is used as the disconnect device, the
disconnet device shall remain readily
operable.
• Do not expose the set, batteries, CDs to
humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.
• The apparatus shall not be exposed to
dripping or splashing.
• Adequate ventilation with a minimum gap of
15cm (6 inches) between the ventilation
holes and surrounding surfaces is necessary
to prevent heat build-up.
• Do not cover the ventilation openings with
items such as newspapers, table-cloths,
curtains, etc.
• No objects filled with liquids, such as vases,
shall be placed on the apparatus.
• No naked flame sources, such as lighted
candles, should be placed on the apparatus.
• The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
• Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such
as sunshine, fire or the like.
• To clean the set, use a dry cloth. Do not use
any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.
Maintenance & Safety (See 9)

Problem
–Possible cause
• Remedy
No sound /power
–Volume not adjusted.
• Adjust VOLUME .
–Power cord not securely connected.
• Connect the AC power cord properly.
–Batteries dead/ incorrectly inserted.
• Insert (fresh) batteries correctly.
–CD contains non-audio files.
• Press ∞,§ once or more to skip to a CD audio
track, instead of the data file.
Display does not function properly / No
reaction to operation of any of the
controls.
–Electrostatic discharge.
• Switch off and unplug the set. Reconnect after a
few seconds.
no , --- or Er indication
–No CD, inserted.
• Insert a CD.
–CD badly scratched or dirty.
• Replace/Clean CD, see Maintenance.
–Laser lens steamed up.
• Wait until lens has cleared.
–CD-R/CD-RW is blank or not finalized.
• Use a finalized CD-R/CD-RW or a suitable CD
Audio disc only.
Note:
Make sure the CD is not encoded with
Copyright protection technologies, as some
do not conform to the Compact Disc
standard.
The CD skips tracks
–CD damaged or dirty.
• Replace or clean CD.
–Program/Shuffle is active.
• Quit program/shuffle mode.
Note: A CD badly scratched or dirty may result
in improper operation.
Poor cassette sound quality
–Dust and dirt on the heads, etc.
• Clean deck parts, see Maintenance .
–Use of incompatible cassette types (METAL or
CHROME).
• Only use NORMAL (IEC I ) for recording.
Recording does not work
–Cassette tab(s) may be broken.
• Apply adhesive tape over the missing tab space.
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING: Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this will
invalidate the guarantee.

Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily separated
into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.
The making of unauthorized copies of copy-protected material, including computer programmes, files,
broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal
offence.This equipment should not be used for such purposes.
Specifications
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12W
Dimensions (w x h x d) . . . . . . . . . . . . . . . . . . . . . . . . . . .291 x146 x242.5 (mm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.83 kg

Meet Philips at the Internet
http://www.philips.com
English
Printed in China AZ1047_UM_61_EN_V2.0
W
CLASS 1
LASER PRODUCT
AZ1047