Philips AZ1509 User manual

PHILIPS
AZ1509 CD Radio Cassette Recorder
ېو
je oni fag 4
١
٢۱٢
0 0 0
Toll Free Help Line
Ligne d'assistance en service libre
Linea de ayuda telefonica sin cargo
800-531-003

Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
e Once your Philips Magnavox purchase ° So complete and return the Warranty
is registered, youre eligible to receive all Registration Card enclosed with your
the privileges of owning a Philips purchase at once.And take advantage
Magnavox product. of these important benefits.
Warran Owner Model
ewwner | آي󰾯 tode! |
Verification Confirmation Registration
Registering your product Your completed Warranty Returning your Warranty
within 10 days confirms Card serves . ا󰾯 Card right
your right to maximum ٢ e as yerificagio x aay ntees you'll
protection under the ۰ pale ear ie erent ot” یز ړ󰾯 u au Atte formation
terms and conditions of واه󰾯 loss. 6 Speeigh ای󰾯 which
your a اناد ۱ * میت󰾯 aes ده󰾯
4° 1 E
سو کې󰾯
Know these
For Customer Use
S
00
(ety
sym
bols
Enter
below
the
Serial
No.
which
is
located on the rear of the cabinet. Retain
CAUTIONI
RISK OF ELECTRIC SHOCK
DO NOT OPEN
this information for future reference.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Model No.
Serial No.
This “bolt of lightning” WARNING: To PREVENT
indicates uninsulated FIRE OR SHOCK HAZARD, DO
material within your unit NOT EXPOSE THIS EQUIPMENT TO
may cause an electrical shock. For the RAIN OR MOISTURE.
safety of everyone in your household,
a
CAUTIONS
To
prevent
electric󰾰
75ص
ا
shock,
match
wide
blade
of
plug
to󰾰
5
The “exclamation point” calls wide slot, and fully insert.
٢٢٣ to features for
which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
MAC5097

English
Francais
Español
Tuner ی󰾯 2 vee ی󰾯 10411
Engl ish introduction.. o j
CD player... ........ .. .. ...12-4
Safety instructions......... ..5
Cassette recorder.. ..15-16
Controls ... ........ 6&7 1 ۱
Pover zanni 8 General information ..... 7
۲۱۳ ۱ دد د󰾯 pee 8 Troubleshooting... .. .. .18
Basic fuctionS oo... eee ee ee g
Limited warranty......... . 19
Francais Radio cesses. 26-27
¢ Introduction. ... ... .. 20
f 7 Lecteur de CD... ... 28-30
Conseils de sécurité .. 21
Platine cassette. .. .. .. .31~32
Commandes ..... 22-33 2
۱ Informations générales........33
Alimentation. . ...... . ..24
Recherche de pannes. ...... .4
Fonctions de base... ... . .. ..25 A:
Garantie limitée... . .... . .35
Espanol Introducción. ند󰾯 36 Radio. co سس󰾯 42-3
Instrucciones sobre Reproductor CD... .. .. 44-46
seguridad . .... 7 Grabadora ......... ....47-48
Controles . ....... 38-39 información general . ..... .. 49
Fuente de alimentación . 40 Localización de averías .. ... 50
Funciones básicas... .... 41 Garantia limitada... ........ .. 51
Canada|
English: This digital apparatus does not exceed the Français: Cet appareil numérique n'émet pas de
Class B lımits for radio noise emissions from digital bruits radioélectriques dépassant les limites
apparatus as set out in the Radio Interference applicables aux appareils numériques de Classe B
Regulations of the Canadian Department of prescrites dans le Réglement sur le Brouillage
Communications. Radioélectrique édicté par le Ministère des
Communications du Canada.
Mexico 17
Es necesario que lea cuidadosamente su instructivo de 0
PRECAUCIÓN - ADVERTENCIA
No abrir, riesgo de choque eléctrico
A/N ATENCIONZ
Verifique que el voltaje de alimentación
sea el requerido para su aparato
Para evitar el riesgo de choque eléctrico, no quite la tapa.
En caso de requerir servicio, dirijase al personal calificado.

English
SAFETY
INSTRUCTIONS
-
Read
before
operating
equipment
11. Grounding or Polarization
The precautions that should be
taken so that the grounding or
polarization means of an
8
ېي󰾯
appliance is not defeated.
CAUTION: To prevent electric shack,
match the wide blade of this plug to the wide
slot, fully insert. Do not use this (polarized) plug
with an extension cord, receptacle or other outlet
unless the blades can be fully inserted to prevent
blade exposure.
12. Power Cord Protection - Power supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cards
and plugs, convenience receptacles, and the point
where they exit from the appliance.
13. Cleaning - The appliance should be cleaned only
as recommended by the manufacturer.
14. Power Lines - An outdoor antenna should be
located away from power lines.
15. Nonuse Periods - The power cord of the appli-
ance should be unplugged from the outlet when
left unused for a long period of time.
16. Object and Liquid Entry - Care should be taken
50 that objects do not fall and liquids are not
spilled into the enclosure through openings.
17. Damage Requiring Service - The appliance
should be serviced by qualified service personnel
when:
A. The power supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has spilled into
the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate
normally or exhibits a marked change in
performance; or
E. The appliance has been dropped, or the
enclosure damaged.
18. Servicing - The user should not attempt to
service the appliance beyond that described in
the operating instructions. All other servicing
should be referred to qualified service personnel.
91/8 EL 4562-1
This product was designed and manufactured 0
meet strict quality and safety standards. There are,
however, some installation and operation precautions
which you should be particularly aware of.
1. Read Instructions - All the safety and operating
instructions should be read before the appliance
is operated.
2. Retain Instructions - The safety and operating
instructions should be retained for future
reference
3. Heed Warnings - All warnings on the appliance
and in the operating instructions should be
adhered to.
4. Follow Instructions - All operating and use
instructrons should be followed.
5. Water and Moisture - The appliance should not
be used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, or swimming
pool, or in a wet basement, etc.
6. Carts and Stands - The appliance should be
used only with a cart or stand that is
recommended by the manufacturer.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overtum.
7. Wall or Ceiling Mounting - The appliance
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
8. Ventilation - The appliance should be situated
50 that its location or position does not interfere
with its proper ventilation. For example, the
appliance should not be situated on a bed, sofa,
rug, or similar surface that may block the
ventilation openings; or, placed in a built-in
installation, such as a bookcase or cabinet that
may impede the flow of air through the
ventilation openings
9. Heat - The appliance should be situated away
from heat sources such as radiators, heat
registers, stoves, or other appliances (including
amplifiers) that produce heat.
10. Power Sources - The appliance should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance

CONTROLS
3
و
2
i
5 ۱
۹
ی
په
CAUTION:
Use
of
controls
or
adjustments
or
performance
of
procedures
other
than
those
herein
may
result
in
hazardous
radiation
exposure.
The
set
complies
with
the
FCC
Rules,
Part
15
and
with
21
CFR
1040.10.

English
CONTROLS
BASIC FUNCTIONS:
(4) POWER ................. to turn the set on and off
(5) CD-TAPE-TUNER ...to select the sound source
(6) VOLUME Y ھ󰾯 ......10 adjust the volume level
D MIG ion 3.5 mm microphone socket
(SG ا󰾯 3.5 mm headphone socket
Note: Connecting the
headphones will
disconnect the speakers.
(g) INCREDIBLE SURROUND
to create a surround sound
effect
Display.................. Window for showing
different playing modes
DOS data DIGITAL SOUND CONTROL
to enhance the type of
music you are listening to
DBB-JAZZ-POP
(42) REMOTE SENSOR ..sensor for the infrared
remote control
REMOTE CONTROL:
E D FORE 9 to select CD functions
TUNER ece to select tuner functions
Digits Û0-9................... CD: to enter a track number
TUNER: to enter a preset
station
to start and to interrupt CD󰾰 ما ةس ا
play󰾰
SHUFFLE ie to play a CD in random
order
A CD: to select the beginning
of the current/previous ۲
a subsequent track
PRESET A Y ............. to select a radio preset
station
4-2۶3 ٣ to stop CD play
TRAY OPEN ................ to open/close the CD tray
VOLUME W A ........... to decrease or increase the
volume level
Notes: — Always select the desired sound
source first and then press the
required function key.
- Numbers consisting of two figures
must be keyed in within 2 seconds.
—LONGPLAY has no function with this set.
7
(1) CASSETTE RECORDER:
RECORD © ........... to start recording
E to start playback
SEARCH <4 .......... to rewind the tape
SEARCH P> .......... to fast forward the tape
STOP-OPEN lf A . to stop the tape and to
open the cassette
compartment
PAUSE سال󰾯 to interrupt recording or
playback
(2) TUNER:
PROGRAM ............ to program preset stations
TUNING rea p>) .....to tune to radio stations
BAND.................... to select the wave band
(FMAM)
PRESET 4.000000... to select a preset station
(3) CD PLAYER:
OPEN-CLOSE A ....ta open/close the CD tray
PLAY-PAUSE ۱۲۰.۸۵ start and to interrupt CD
play
STOP M................. to stop CD play and to
erase a program
SEARCH rec اط«󰾯 .....10 skip and to search
forward and backward
SHUFFLE ............... to play tracks in random
order
PROGRAM ............ to program track numbers
and to review the program
REPEAT ................. to repeat one track or the
entire CD or program

POWER SUPPLY
Batteries
For the set (optional):
Open the battery compartment of the set and insert six batteries,
type R20, UM1 or D-cells (preferably alkaline).
For the remote contro! (supplied):
Open the battery compartment of the remote control and insert two
batteries, type 803, UM4 or AAA-cells (preferably alkaline).
Remove the batteries if they are dead or if the set will not be used
for a long time.
Batteries contain chemical substances, therefore they
should be disposed of properly.
AC power
کے
Check whether the voltage shown on the type plate corresponds
to your local voltage. If it does not, consult your dealer or
service organization. The type plate is located on the base أ󰾯
of the set.
If the set is equipped with a VOLTAGE selector GO, set this
selector to the local voltage.
2 Connect the power cable to the AC MAINS inlet and the wall
socket. This switches on the power supply. The cable is
inside the battery compartment.
The battery supply will be switched off when the set is connected
to a power supply. To change over to battery supply, remove the
plug from the unit's AC MAINS socket.
To disconnect the set from the completely, remove the power plug
from the wall socket.
To avoid overheating of the set a safety circuit has been built in. Therefore your
set may switch off under extreme conditions. If this happens, release the
POWER button and let the set cool down before reusing it.
۱5۱3

BASIC FUNCTIONS
Push the POWER button.
— The display lights up. If the set is using batteries the display
will not be back-lit.
¡Switching on and off/standby |
English
The set is switched off when the POWER button is released.
In order to switch off the power supply, remove the power plug.
Note: If you are using batteries, always be sure to switch the set
01 after use. This will avoid unnecessary power consumption.
(Adjusting volume and sound
Adjust the volume using the controls VOLUME W A.
جه󰾯 Display indication: Volume level from 0 to 32.
Adjust the sound to suit your taste by pressing the button DSC
several times (DBB is Dynamic Bass Boost).
جه󰾯 A light indicates either ۲
Create a surround sound effect by pressing INCREDIBLE
SURROUND.
جه󰾯 The INCREDIBLE SURROUND button lights up.
Do not cover any vents and leave sufficient room around the unit
for ventilation.
Note: The effect of INCREDIBLE SURROUND may vary with
different types of music.

TUNER
Tuning to radio stations
سي󰾯
1 Select the tuner by pressing the CD-TAPE-TUNER button
until appears on the display.
2 Select the wave band by using the BAND selector.
> Display indication: the selected waveband.
3 Press TUNING rea or >>: for approximately one second and then
release the button.
جه󰾯 The radio automatically tunes to a station with sufficient
strength. Display indication during automatic tuning: 57 2 |
4 Repeat this procedure until you find a station you desire.
To tune to a weak station briefly press TUNING rec or <<! as
often as necessary for optimum reception, or until the correct
frequency is indicated in the display.
Improving RADIO reception
For FM pull out the external antenna. To improve the signal, incline
and turn the antenna. Reduce its length if the signal is too strong
(very close to a transmitter).
For AM, direct the internal antenna by turning the whole set. The
external antenna is not needed.
10
ysi¡6u3

TUNER
¡Programming radio stations (29 preset stations) |
You can store up to 29 radio stations in the memory. When
tuning to a preset station, the preset number (1 to 29) is indicated
in the display.
English
1 Select the tuner by pressing the CD-TAPE-TUNER button until
appears on the display.
2 Tune to a desired station with TUNING rea or < as described
earlier.
~ If the frequency is already stored in the memory, the preset
number will be displayed.
3 Press PROGRAM to enter the programming mode. | 1
=> During programming, PROGRAM flashes on the display. | ne Se
5 Press PROGRAM to confirm the setting.
Tuning to preset stations
Press PRESET 4 or > until the desired preset number appears on the
display.
Environmental information
All
redundant
packing
material
has
been
omitted.
We
have
tried
to
make
the
packaging
easy
to
seperate
into
three
mono
materials:
cardboard
(box),
polystyrene
foam
(buffer)
and
polyethylene
(bags,
protective
foam
sheet)
Your
set
consists
of
material
which
can
be
recycled
if
disassembled
by
a
specialized
company.
Please
observe
the
local
regulations
regarding
the
disposal
of
packing
materials,
expanded
batteries
and
old
equipment

CD PLAYER
1 Select the CD player by pressing the CD-TAPE-TUNER button
until B® appears on the display.
۱۶۱3
2 Open the tray by pressing the OPEN-CLOSE A button.
3 Insert an audio CD (printed side up) and close the tray by
pushing it gently or pressing the OPEN-CLOSE A button again.
-» The CD player starts and scans the contents list of the CD.
Display indication: the total number of tracks and the total
playing time. After that the CD player stops.
4 Press the PLAY-PAUSE PH button to start CD play.
=> Display indication: the current track number and the elapsed
time of the current track.
5 Press the STOP m button to stop CD play.
جه󰾯 Display indication: the total number of tracks and the total
playing time.
You can interrupt CD play by pressing PLAY-PAUSE PII.
Continue CD play by pressing the button again.
جه󰾯 Display indication: the time where playback was stopped
flashes.
Notes: CD play will also stop if:
— you open the tray;
— you push the POWER button or
— the end of the CD is reached.
lf you make a mistake operating the CD player, or the CD
player cannot read the CD, the display indicates £” ٣ ar (see
TROUBLESHOOTING).
12

English
CD PLAYER
Search backward ws and »» forward
Selecting another track
Briefly press the SEARCH e or »» button once/several
times to skip to the beginning of the current/previous or
subsequent track(s).
During play:
CD play continues automatically with the selected track.
From stop position:
press PLAY-PAUSE >H to start CD play.
Display indication: the selected track number.󰾰 جه
Searching for a passage during CD play
1 Hold down the SEARCH me or »» button to find a particular
passage in a forward or backward direction.
جه󰾯 CD play continues at a low volume.
2 Release the button when you have reached the desired passage.
Note: in the SHUFFLE and REPEAT modes and when playing a
program, searching is only possible within a particular track.
Different
playing
modes:
SHUFFLE
/
REPEAT
|
13
SHUFFLE - playing in random order
1 Press SHUFFLE before or during CD play.
جه󰾯 All the tracks of the CD (or program if available) will now be
played in random order.
2 To return to normal CD play, press SHUFFLE again.
REPEAT - Repeating the entire CD or one track of the CD
1 Before or during CD play, repeatedly press REPEAT to cause the
display to show the different repeating modes.
—> REPEAT: the current track is played repeatedly.
ج-󰾯 REPEAT ALL: the entire CD or program is played repeatedly.
2 10 return to normal CD play press REPEAT until the display
indication disappears.
Note: You can activate the different playing modes at the same
time, 6. g. you can repeatedly play the entire CD or program in
random order (SHUFFLE REPEAT ALL]

CD PLAYER
Programming track numbers
You can select a number of tracks and store these in the memory
in the desired sequence. You can store any track more than once.
At most, 20 tracks can be stored in the memory.
۱5۱3
1 Select the desired track with SEARCH ۵0
2 As soon as the desired track is displayed, press the PROGRAM |
button to store the track in the memory.
- PROGRAM appears in the display. The number of the stored
track, Fr and the total number of stored tracks is shown.
3 Select and store all desired tracks in this way.
You can review your settings by pressing the PROGRAM button
for more than 2 seconds.
جه󰾯 The display shows all stored track numbers in sequence.
Notes: — If you try to store more than 20 tracks, the display
shows Fifi ع󰾯 .
— If you press PROGRAM and there is no track
selected the display shows SEL ELE.
If you have selected the tracks in the stop position, press
PLAY-PAUSE PAL
If you have selected the tracks during CD play, first press STOP 8
and then press PLAY-PAUSE ۰
Erasing the program from the stop position
From the stop position, press STOP ۰
=> £LERAr lights up briefly, PROGRAM disappears and your
program is erased.
Notes: The program will also be erased if you
— interrupt the power supply,
— open the tray, or
— press the POWER button.
14

English
CASSETTE RECORDER
Playing a cassette
1 Select the tape by pressing the CD-TAPE-TUNER button
until appears on the display.
2 Press STOP-OPEN لا󰾯 A to open the cassette compartment.
3 Insert a recorded cassette with the open side facing the front.
4 Close the cassette compartment by pushing it down,
5 Press PLAY » to start playback.
6
By
pressing
<<
or
»»
rewinding
or
fast
forwarding
of
the
tape
is
possible.
7 To stop the tape press STOP-OPEN mm A.
Notes: - The keys are automatically released at the end of the tape.
— IFPLAY » or RECORD © are depressed, you can not
switch to another sound source.
|General information on recording
Recording is permissible insofar as copyright or other rights of
third parties are not infringed upon.
For recording on this set you should use a cassette of the type
NORMAL (IEC type I). This deck is not suitable for recording on
cassettes of the type CHROME (IEC type 11( or METAL (IEC
type IV).
The
recording
level
is
set
automatically.
The
controls
VOLUME,
DSC
and
INCREDIBLE
SURROUND
do
not
affect
the
recording.
At
the
very
beginning
and
end
of
the
tape,
no
recording
will
take
place
in
the
7
seconds
during
which
the
leader
tape
passes
the
recorder
heads.
Protecting tapes from accidental erasure
Keep
the
cassette
side
to
be
protected
ín
front
of
you
and
snap
off
the
left
tab.
Now,
recording
on
this
side
is
no
longer
possible.
To
record
again
on
this
side
of
the
cassette,
cover
the
hole
with
a
piece
of
cellophane
tape.
15

CASSETTE RECORDER
Recording from the CD player — CD synchro start
1 Select the CD by pressing the CD-TAPE-TUNER button
until [EP] appears on the display.
2 Insert a CD and, if desired, program track numbers.
3 Press STOP-OPEN 18 A to open the cassette compartment.
4 Insert a blank cassette with the open side facing the front.
5 Close the cassette compartment by pushing it down.
6 Press RECORD @ to start recording.
جه󰾯 Playing of the CD or program starts automatically. It is not
necessary to start the CD player separately.
7 For brief interruptions, press PAUSE MH. To resume recording,
oress the PAUSE ۱۱ key again.
8 To stop recording, press STOP-OPEN الا󰾯 A.
Notes: the recording can be started from different positions:
— if the CD player is in the Pause mode, recording will start
from this very position (use SEARCH rea or »»i);
— if the CD player is in the Stop mode, recording will start
from the beginning of the CD or program.
Recording from the radio or with the microphone
1 (Selecting and preparing the source)
RADIO: Select the radio by pressing the CD-TAPE-TUNER button
until appears on the display.
MICROPHONE: Select the tape by pressing the
CD-TAPE-TUNER button until appears on the display.
Connect a microphone with a 3.5 mm plug to the MIC socket
and set the VOLUME contro! to zero (monitoring during
microphone recording is not possible).
2 Press STOP-OPEN m A to open the cassette compartment.
3 Insert an unprotected blank cassette with the open side facing
front.
4 Press RECORD @ to start recording.
5 For brief interruptions press PAUSE II. To resume recording press
the PAUSE 11 key again.
6 To stop recording, press STOP-OPEN الا󰾯 A.
Note:
When
recording
from
the
radio
or
a
CD,
you
can
connect
a
microphone
and
mix
the
sounds.
Otherwise,
be
sure
there
is
no
microphone
connected
that
could
disturb
your
recording.
16
۱53

GENERAL INFORMATION
|General maintenance |
Do not expose the set, batteries, CDs or tapes to humidity,
rain, sand or excessive heat (caused by heating equipment or direct
sunlight).
English
The mechanical parts of the set contain self-lubricating bearings
and must not be oiled or lubricated!
You can clean the set with a soft, slightly dampened chamois cloth.
Do not use any cleaning agents as they may have a corrosive
effect.
¡Tape deck maintenance |
To ensure proper recording and playback quality, clean parts ABO
after approximately 50 hours of operation. Use a cotton swab slightly
moistened with alcohol or a special head-cleaner fluid.
Press PLAY » and clean the rubber pressure rollers ©.
Press PAUSE 11 and clean the capstans (8) and the heads (A).
Note: Cleaning of the heads (A) can also be done by playing a
cleaning tape once,
60
player
and
CD
handling
The lens may cloud over when the set is suddenly moved from
cold to warm surroundings. Playing a CD is not possible at such
times. Leave the CD player in a warm environment until the
moisture evaporates.
To take the CD out of its box easily, press the center spindle while
lifting the CD.
Always pick up the CD by the edge and put it back in its box
after use.
To clean the CD, wipe it in a straight line from the center toward
the edge using a soft, lint-free cloth. A cleaning agent may damage
the disc!
Never write on a CD or attach a sticker to it.
17

TROUBLESHOOTING
If a fault occurs, first check the points listed
WARNING below before taking the set for repair.
Under no circumstances should you try If you are unable to remedy a problem by
to r epair the set yourself, as this will following these hints, consult your dealer or
invalidate the warranty. service center.
SOLUTION
Adjust the VOLUME
Disconnect headphones
PROBLEM POSSIBLE CAUSE
Nosound/nopower VOLUME is not adjusted
Headphones are connected
Powercable is not securely connected Connect the cable properly
Replace batteries
Insert the batteries correctly
Batteries are dead
Batteries are incorrectly inserted
Changing over from AC power to battery Remove the plug from the AC MAINS
inlet
Disconnect the set from power supply
reconnect it after a few seconds
Aim the antenna for optimum reception:
— FM: incline and rotate external
antenna
— AM: rotate the entire set
Keep the radio away from electrical
equipment
Replace or clean the CD, see maintenance
Insert a CD
Insert a CD with the label facing up
Wait until the lens has cleared
Replace or clean the CD
Switch off shuffle or program play
Clean the heads, capstans and pressure
roller, see MAINTENANCE
Only use NORMAL cassettes for
recording
Put a piece of cellophane tape over the hole
Insert the batteries correctly
Replace batteries
Reduce the distance
supply without removing the plug
No reaction to Electrostatic discharge
operation of any keys
Poor radio reception Weak radio signal
interference caused by the vicinity of
electrical equipment like TVs, video
recorders, computers, engines, etc.
nod 5 or The CD is badly scratched or dirty
Error indication No CD is inserted
The CD is inserted upside down
The laser lens is steamed up
The CD skips tracks The CD is damaged or dirty
SHUFFLE Or PROGRAM is active
Poor cassette sound Dust and dirt on the heads, capstan
quality or pressure roller
Use of unsuitable cassette types
(METAL or CHROME)
Recording does not work Cassette tab(s) may be snapped off
Remote control does Batteries are incorrectly inserted
not function properly Batteries are dead
Distance to the set is too far
18
۷5۵3

LIMITED WARRANTY
PHILIPS MAGNAVOX PORTABLE COMPACT DISC
One Year Free Exchange
This product must be carried in for an exchange.
EXCHANGING A PRODUCT IN U.S.A.,
PUERTO RICO OR U.S.VIRGIN ISLANDS...
Contact your dealer to arrange an exchange. Or, ship the
product, insured and freight prepaid, and with proof of
purchase enclosed, to the address listed below.
Small Product Service Center
Philips Service Company
907 Snapps Ferry Road, Plant 2, Building 6
Greeneville, TN 37743
(In U.S.A, Puerto Rico and U.S.Virgin Islands, all implied
warranties, including implied warranties of merchantability
and fitness for a particular purpose, are limited in duration
to the duration of this express warranty. But, because some
states do not allow limitations on how long an implied
warranty may last, this limitation may not apply to you.)
EXCHANGING A PRODUCT IN CANADA...
Contact your dealer to arrange an exchange. Or, ship the
product, insured and freight prepaid, and with proof of
purchase enclosed, to one of the Philips consumer service
centers listed below.
Philips Electronics Ltd.
601 Milner Avenue, Scarborough, Ontario, M1B 8
[phone]
4977 Levy Street, St. Laurent, Québec, H4R 9
[phone]
1741 Boundary Road, Vancouver, B.C.,V5M 3Y7
[phone]
(In Canada, this warranty is given in lieu of all other
warranties. No other warranties are expressed or implied,
including any implied warranties of merchantability or
fitness for a particular purpose. Philips is not liable under
any circumstances for any direct, indirect, special, incidental
or consequential damages, howsoever incurred, even if
notified of the possibility of such damages.)
TO GET OUT-OF-WARRANTY EXCHANGE...
In U.S.A., Puerto Rico or US.Virgin Islands, contact Philips
Service Company at [phone] to obtain the cost of
out-of-warranty exchange. Then carefully pack the product
and ship it to the Small Product Service Center (address
listed above). In Canada, contact the nearest Philips
consumer service center (phone number and address listed
above) to obtain the cost of out-of-warranty exchange.
Then carefully pack the product and ship it to that service
center,
REMEMBER...
Please record the model and serial numbers found on the
product below. Also, please fill out and mail your warranty
registration card promptly. It will be easier for us to notify
you if necessary.
MODEL#
SERIAL #
WHO IS COVERED?
You must have proof of purchase to exchange the product.
A sales receipt or other document showing that you
purchased the product is considered proof of purchase.
Attach it to this owner's manual and keep both nearby.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product.
For one year thereafter, a defective or inoperative product
will be replaced with a new, renewed or comparable
product at no charge to you.A replacement product is
covered only for the original warranty period. When the
warranty on the original product expires, the warranty on
the replacement product also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
* labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna systems outside of the
product.
* product repair and/or part replacement because of
misuse, accident, unauthorized repair or other cause not
within the control of Philips Consumer Electronics
Company.
e reception problems caused by signal conditions or cable
or antenna systems outside the unit.
* a product that requires modification or adaptation to
enable it to operate in any country other than the
country for which it was designed, manufactured,
approved and/or authorized, or repair of products
damaged by these modifications.
٠ Incidental or consequential damages resulting from the
product. (Some states do not allow the exclusion of
Incidental or consequential damages, so the above
exclusion may not apply to you. This includes, but is not
limited to, prerecorded material, whether copyrighted or
not copyrighted.)
* a product that is used for commercial or institutional
purposes,
WHERE IS EXCHANGE AVAILABLE?
You may exchange the product in all countries where the
product دا󰾯 officially distributed by Philips Consumer
Electronics Company. In countries where Philips Consumer
Electronics Company does not distribute the product, the
local Philips service organization will attempt to provide a
replacement product (although there may be a delay if the
appropriate product is not readily available).
BEFORE REQUESTING EXCHANGE...
Please check your owner's manual before requesting an
exchange. Adjustments of the controls discussed there may
Save you a trip.
This
warranty
gives
you
specific
legal
rights.
You
may
have
other
rights
which
vary
from
state/province
to
state/province.
Philips
Service
Company,
P.O.
Box
555,
Jefferson
City,
Tennessee
37760,
(423)
475-8869
EL4967E003
/
MAC
4108
/
12-95

-=
ts