Philips CD 740 User manual

PHILIPS
CD 740 Compact Disc Player

-—V
(^English. p age 4
V __
... ... ' \
CD Fran$ais. . p a g e 15
V ... ... J
---— X
(D) DeutSCh. S e ite25
L_ J
--
(nl) Nederlands. . p a g i n a 35
. . ___/
S’ --“"N
CD Espanol. . p a g i n a 45
(mex) Mexico.1SH
PRECAUC10N - ADVERTENCIA
NQ ABR1R, K'ESGO DE CHOQUE ElECTK. CO \
ATEIMC10N
VERIFIQUE CUE EL VOLTAJE DE AUVEfJTACIOfl
SEA EL REQUERID 0 PARA SU APARATO
PARA EVITAR EL R.ESGO DE CHOQUE ElECTRICO. KO QUITE LA TAPA,
IEN CASO DE REQUERIR SERVJKD, D.RLFASE AL PERSONAL AUT0R-2AD0 DE PH'UPS
NDM
Es necesario que lea cuidadosamente su
instructive de manejo.
CD Norge
Typeskilt finnes bak pa apparaten.
CD Italiano.
..pagina 55
-
__ J
(dk) Dansk.
V _
J
CD Svenska.
\

(aus) Australia
New Zealand (nz)
Guarantee and Service valid for Australia
The benefits given to the purchaser by this warranty are in
addition to all other rights and remedies, which, under the
Trade Practices Act or other Commonwealth or State law, the
purchaser or owner has in respect of the product
The Philips product carries the following warranties'
- C-scries Hifi-$y$tem$ 12 months.
- Compact Disc Players 12 months
- Horne Audio Systems 6 months
- Clock radios, portable radios, cassette recorders, cassette
players and radio recorders 90 days.
Any detect in materials or workmanship occurring within the
specified period from the date of delivery, will be rectified free
of charge by the retailer from whom this product was pur¬
chased
Note: Please retain your purchase docket to assist prompt ser¬
vice
Conditions of this warranty
1-All claims for warranty' seance must be made to the retailer
from whom this product was purchased. All transport charges
incurred in connection with warranty service or replacement
will be paid by the purchaser
2.These warranties do not cover batteries and extend only to
defects in materials or workmanship occurring under normal
use of the product where operated in accordance with our in¬
structions
Philips Consumer Products Division,
Technology Park
Figtree Drive, Australia Centre
Homebush2140,
New South Wales
Guarantee and Service for New Zealand
Thank-you for purchasing this quality Philips product. Philips
New Zealand Ltd guarantees this product against defective
components and faulty workmanship for a period of 12 months
Any defect in materials or workmanship occurring within 12
months from the date of purchase subject to the following con¬
ditions will be rectified free of charge by the retailer from
whom this product was purchased.
Conditions
1. The product must have been purchased in New Zealand. As
proof of purchase, retain the original purchase docket
2. The guarantee applies only to faults caused by defective
components, or faulty workmanship on the part of the manu¬
facturer.
3. T he guarantee does not cover failures caused by misuse,
neglect, normal wear and tear, accidental breakage, use on
the incorrect voltage, use contrary to operating instructions,
or unauthorised modification to the product or repair by an
unauthorised technician.
4. R easonabIe evidence (in the form of a sales docket) must be
supplied to indicate that the product was purchased no more
than 12 months prior to the date of your claim
5.In the event of a failure. Philips shall be under no liability for any
injury, or any loss or damage caused to property or products oth¬
er than the product under guarantee
This guarantee does not prejudice your rights under common
law and statute, and is in addition to the normal responsibili¬
ties of the retailer and Philips.
Howto claim
Should your Philips product fail within the guarantee period,
please return it to the retailer from whom it was purchased. In
most cases the retailer will be able to satisfactorily repair or
replace the product.
However, should the retailer not be able to conclude the matter
satisfactorily, or if you have other difficulties claiming under
this guarantee, please contact
The Guarantee Controller
Philips New Zealand Ltd.
E3 P.O. Box 41.021
Auckland
© (09) 84 94160
fax 1? (09) 84 97 858
3

English
<SD CONTENTS
PAGE
INSTALLATION.5
Accessories . . . .. 5
J Power supply setting.... 5
Connections... 5
Fitting a mams plug (UX . only . .... . . .. 5
FUNCTIONAL OVERVIEW.6-7
Front of player........... 6
Remote control.... 7
Display. ... 7
PLAYBACK.8-10
Normal playback.. 8
Selecting another track during play....... 9
Searching for a passage during play.......9
Starting with a particular track.....9
Scanning a CD .. 9
Playing the CD in random order.......9
Repeating play... 9
Calling up other time information ....................9
Adjusting the sound level... . 1 0
Setting the fade-in and fade-out time ............10
Inserting an extra pause........10
Searching the loudest passage................10
Listening with headphones......................10
PROGRAMMING.11
Storing a programme........ ........11
Checking the programme..........11
Playing the programme........-.11
Erasing a programme.........11
Erasing a track from a programme ..11
EDIT.12
Recording in the EDIT mode........... .. 1 2
ADDITIONAL INFORMATION.13
Maintenance............ . 1 3
Recycling .. 1 3
TROUBLESHOOTING.14
TECHNICAL DATA.96
4

INSTALLATION (gb)
ACCESSORIES _
With this player are supplied'
- a connection cable,
- a remote control,
- batteries for the remote control
POWER SUPPLY SETTING _
• Check that the type plate on the rear of your
player indicates the correct supply voltage
• If your mains supply voltage is different, consult
your dealer or our Service Organisation
• Certain versions of this player are
equipped with a voltage selector
at the bottom of the player which
enables you to set the player to
the correct mains voltage yourself,
position 120 V - for all mams voltages between
110V and 127V;
position 230 V - for all mams voltages between
220V and 240 V
CONNECTIONS
1 2
1 DIGITAL OUT
This output supplies a digital signal and can
therefore only be connected to an input which
is suitable for this signal
Use here a lead with one cinch plug on either
end
/Vever connect this socket to a non-digital
input of an amplifier, such as AUX, CD, TAPE,
PHONO, etc!
2 ANALOG OUT
For the connecting cable to the amplifier
FITTING A MAINS PLUG (U.K. only)
This apparatus is fitted
with an approved
moulded 13 Amp plug
To change a fuse in
this type of plug
proceed as follows
• Remove fuse cover
and fuse.
• Fix new fuse which should be a 8S1362 5A,
A S.T A. or BSl approved type.
• Refit the fuse cover
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should have
a value of 5A. If a plug without a fuse is used, the
fuse at the distribution board should not be
greater than 5A.
NOTE
The severed plug must be disposed to avoid a
possible shock hazard should it be inserted
into a 13A socket elsewhere.
HOW TO CONNECT A PLUG
The wires in the mains lead are coloured in accor
dance with the following code:
BLUE - NEUTRAL" { N ) and BROWN - LIVE' 1 ( L).
As these colours may not correspond with the colour
markings identifying the terminals in your plug, pro¬
ceed as follows:
• The BLUE wire must be connected to the ter¬
minal which is marked with the letter “N J or
coloured BLACK.
• The BROWN wire must be connected to the
terminal which is marked with the letter r L " or
coloured RED.
• Do not connect either wires to the earth termi¬
nal in the plug which is marked by the letter ”E n
or by the safety earth symbol or coloured green
or green-and-yellow.
Before replacing the plug cover, make certain that
the cordgrip is clamped over the sheath of the
lead - not simply over the two wires.
• Insert a red plug into the 'R' socket and the
other plug into the 'L' socket.
• Insert the two other plugs into the correspon¬
ding sockets of the CD or AUX input of your
amplifier.
You can also use the TUNER or TAPE 1N-
connection, but never the PHONO input!
5
English

English
<§D FUNCTIONAL OVERVIEW
FRONT OF PLAYER _
1 POWER ON/STANDBY - Switching on and
off.
2 I(nfra) R{ed) SENSOR - Receives the signals
from the remote control.
3 Display - Informs you about the functioning
of the player.
4 PRG (programme) - Opening and closing the
memory when compiling a programme.
5 1-0 digit keys
- Selecting another track during play.
- Selecting a track to start play with.
- Selecting tracks when compiling a
programme.
- Entering the recording time when making a
tape recording.
6 CLR (clear)
- Erasing a programme.
- Erasing track numbers from a programme.
7 STOP/CP
- Stopping play.
- Erasing a programme (CP = Clear Programme).
8 PLAY/REPLAY
- Starting play.
- Returning to the beginning of a track.
9 \« and
- Selecting another track during play.
- Selecting a track to start play with.
- Fast search to a particular passage during
play.
- Selecting the recording mode when making a
tape recording.
- Selecting the recording time when making a
tape recording.
10 OPEN/CLOSE - Opening and closing the CD
compartment. The compartment also closes
when the front is pressed briefly.
11 REVIEW - Checking a programme.
12 EDIT - Activating the EDIT function when
making a tape recording.
13 SCAN - Automatically playing the beginning
of each track.
14 REPEAT - Repeating play.
15 SHUFFLE - Playing in random order.
16 TIME - Selecting the time information you
want to see.
17 PEAK SEARCH - Searching the loudest pas¬
sage (peak) on a CD or in a programme when
making a tape recording.
18 PHONES - Connecting headphones.
19 FADER - Fading in and out during play.
20 AUTO SPACE - Automatic insertion of an
extra pause between tracks.
21 LEVEL - Adjusting the volume when listening
with headphones.
22 PAUSE - Interrupting play.
6

FUNCTIONAL OVERVIEW <§D
REMOTE CONTROL
- The life of the batteries of the remote control is
around one year For replacement only use
batteries of the type R03, UM4 or AAA.
- The buttons on the remote control have the same
functions as the corresponding ones on the player.
- Extra buttons:
23 - VOLUME + - Adjusting the
sound level when the player
is connected via the ANALOG |
OUT output or the DIGITAL
OUT output to an amplifier or H 1 F 1 system with¬
out its own control
DISPLAY
SRACE TRACK «AK TOTAL REM TRACK TIME R£«AT 1
“ US£ SB CO £0 CO SB SB «*««
(lo ia I iai. iai m- iai iai
1 ? 3 « V b 7 * 9 Ifr 11 12 13 14 1$ .
SPACE ~ Lights up when an extra pause is insert-
ed between the various tracks
PAUSE - Lights up when play is interrupted.
(((O - Lights up when the player receives a com¬
mand from the remote control.
TRACK - Indicates:
- what track is being played;
- the number of tracks on the CD or in a programme.
PEAK
- Flashes when the loudest passage (peak) on a
CD or in a programme is being searched.
- Lights up when the loudest passage (peak) has
been found.
SPACE TRACK REAK TOTAL REM TRACK TIME REPEAT 1
“ use CO CO CO CO £0 SB
{((0 IAI. IA< IAI: IAI IAI
1 2 3 -4 ->-$?* 9 10 11 12 13 H 1* *
TRACK TIME - Indicates the elapsed playing time
of the track being played.
REM(ainmg) TRACK TIME - Indicates the
remaining playing time of the track being played.
TOTAL REM(ainmg) TIME - Indicates the remaining
playing time of the CD or a programme.
TOTAL TIME - Indicates the total playing time of
the CD or a programme.
REPEAT - Lights up when you repeat a CD or a
programme.
REPEAT 1 - Lights up when you repeat a track.
SHUFFLE - Lights up when the tracks are played
i n rando m order.
i M m a fli _ Flashes when a programme is being
compiled.
1-15 track number indicator - Shows the number
of tracks on the CD.
+ - Lights up when there are more than 15 tracks
on the CD.
Display messages:
Lights up when the
CD's contents list is
being scanned.
Lights up when there
is no CD in the
CD compartment.
Lights up when insert
ing or playing a non
audio CD (CD-ROM,
CD-I or CDV).
Lights up if you select a
non-existent track
number.
Lights up if you try to
activate a function for
which you must first
start play.
Lights up if you try to
activate a function for
which you must first
stop play.
7
English

English
<§D PLAYBACK
NORMAL PLAYBACK (PLAY/REPLAY) __
NOTE ! Use only audio CDs; no CD-ROM, CD-1 or CDV.
• Press POWER ON/STANDBY 1 to switch the player on.
- Open the CD compartment by pressing OPEN/CLOSE 10.
- OPEN lights up.
• Insert an audio CD, printed side up, and close the compartment.
- CLOSE lights up, followed by READ. The number of tracks and the playing time of the CD
are shown on the display.
• Press PLAY/REPLAY 8 to start play.
You can also press PLAY/REPLAY immediately after inserting the CD; the compartment
then closes automatically.
You can also close the CD compartment by pressing its front; playback will then start
automatically.
- The number indicator shows how many tracks are on the CD; when a track has been
played its number disappears.
- The track being played is always shown under TRACK and its elapsed playing time is
shown under TRACK TIME.
- Play will stop after the last track.
• Press POWER ON/STANDBY 1 to switch the player off.
You can interrupt playback by pressing PAUSE 22; PAUSE then lights up.
Press PLAY/REPLAY 8 to restart; if you first press PAUSE again and then PLAY/REPLAY,
the current track starts again from the beginning.
You can also restart play by pressing SCAN 13, SHUFFLE 75or the 1-0 digit keys 5.
If you press PLAY/REPLAY during play, the current track starts again from the beginning.
You can stop playback by pressing STOP/CP 7 or OPEN/CLOSE 10.

PLAYBACK <§D
SELECTING ANOTHER TRACK DURING PLAYING THE CD IN RANDOM ORDER
PLAY (1-0) (SHUFFLE)_
• Key in the desired number (numbers consisting
of two figures must be keyed in within 2 seconds).
- The music stops and a moment later the
selected track begins to play.
You can also select the number by pressing or
9 (less than 0 5 seconds).
SEARCHING FOR A PASSAGE DURING
PLAY (\MM ►► !) _
• Hold 9 down to search backwards to the
beginning
• Hold 9 down to search forwards to the
end
The searching speed is determined by how long a
key is pressed
- the first 2 seconds fairly slowly, with sound;
- then at the maximum speed, with no sound.
If you reach the end of the last track and release
►► I, play wilt resume a few seconds before the
end of the CD
STARTING WITH A PARTICULAR TRACK
<K»_
• Key in the desired number (numbers consisting
of two figures must be keyed in within 2 seconds).
- Play starts from the selected track.
You can also select the number by pressing or
9 (less than 0 5 seconds) and then pressing
PLAY/REPLAY 8
SCANNING A CD (SCAN) _
• Press SCAN 13 before or during play.
- If the CD compartment was open, it will now
close
- SCAN lights up for
2 seconds and the
first 10 seconds of
each track are played
in turn, 10 seconds are counted down each
time under REM TRACK TIME.
• When the playerreaches a track which you
wish to hear in full, press SCAN again or
PLAY/REPLAY 8
TRACK REM TRACK TTMt
s ***) ■ * 9 a nv
• Press SHUFFLE 75 before or during play.
- If the CD compartment was open, it will now
close.
- SHUFFLE lights up
and all the tracks are
now played in a
random order.
• Press SHUFFLE again
norma! play.
If you press 9 t you will return to a track
which has already been played.
If you press 9, you will select any one of the
following tracks.
If you press REPEAT 14, twice the tracks will be
repeated in a different order each time, although
the first track played will always be the same.
REPEATING PLAY (REPEAT) _
Repeating a track:
• Press REPEAT 14 before or during playback.
- REPEAT 1 lights up;
the track will now
be repeated
continuously.
• Press REPEAT twice to stop the track being
repeated.
Repeating the CD:
• Press REPEAT 14 twice before or during play¬
back.
- REPEAT lights up;
the CD will now be
repeated
continuously.
• Press REPEAT again to stop the CD being
repeated.
CALLING UP OTHER TIME INFORMATION
( TIME) _
• Press TIME 16
whenever you want
to know theremain-
ing playing time of
the track being played
• Press TIME again if
you wish to know the
remaining playing
time of the entire CD
(TOTAL REM TIME).
• Press TIME again if
you wish to return to
the elapsed playing
time indication of the
current track (TRACK TIME)
TRACK
□
u
7 t « * S
Rtw TRACK raw
/ i n
l: 1 U
7 S * 1« H
(REM TRACK TIME).
2
T0TA_ *** rvt
c n n n
u: L_ U
? i 4 * $
* * » 3 « *
t o
i fZ
i n c
t» * i —*
L LJ
d i: H b
if you wish to return to
9
English

English
<H> PLAYBACK
ADJUSTING THE SOUND LEVEL ( - V OLUME +)
NOTE!
- Use the - VOLUME + keys
(on the remote control) only if
the player is connected via the
ANALOG OUT output or the
DIGITAL OUT output to an amplifier or HiFi sys¬
tem without its own control.
- The setting chosen with - VOLUME + will be
cancelled when the player is switched off.
• Hold - VOLUME 23 pressed down.
- VOLUME lights up; the output signal from the
player will now decrease gradually.
- The successive steps are shown on the display.
VOL EE
it n i r ..
\! u u z z
n n i ~
M U l_ Z _
n n i r
M u I _
u n i __
v! U "
n n i
M U JL _
• Release the key as soon as the required sound
level is obtained.
• Hold VOLUME + 23 pressed down.
- VOLUME lights up; the output signal will now
increase again gradually to the maximum level.
- The successive steps are shown on the display.
it n i
\l u /_
u n i „
M U L z
it n i r
M u t _
i / n i r
V U !_ _ _
it n i r -
M u /_
uni z z
M U I _
• Release the key as soon as the required sound
level is obtained.
SETTING THE FADE- IN AND FADE-OUT
TIME (FADER)
NOTE!
The FADER function can be used
if the player is connected to the
amplifier or the system via the
ANALOG OUT output or the
DIGITAL OUT output.
• During play press FADER 19.
- The sound level will now gradually decrease
(FADE OUT), after which the player will go into
the PAUSE mode.
F RUE E
FR3E r
FUSE.
Press FADER again.
Play continues and the sound level will increase
again to the originally set level (FADE IN).
r p n c
/ n ii i _
F RUE z
c □ ti c n
i n ±i >_ _
I N SERTING AN EXTRA PAUSE (AUTO SPACE)
• Press AUTO SPACE 20.
- SPACE lights up;
during play an extra
pause of 4 seconds
will be inserted
between the various tracks.
• Press AUTO SPACE again to delete the extra
pause.
U
I
G n o
l : U D
> 3 3 13 41
SEARCHING THE LOUDEST PASSAGE
( P E AK SEARCH) _
• In STOP mode, press
- PEAK starts flashing
and the CD or the
programme will now
be scanned for the
loudest passage (the peak).
- The display shows the track being scanned and
its elapsed playing time.
- When the loudest
passage has been
found it will be
repeated continuous¬
ly (from 2 seconds before the peak until 2 sec¬
onds after the peak)
• You can now adjust your recording device.
• You can stop the scan by pressing STOP/CP 7
or OPEN/CLOSE 10, if you press PLAY/REPLAY
8, the CD or the programme will be played
from the beginning.
13 3 . i
PEAK SEARCH 17.
081
LISTENING WITH HEADPHONES (PHONES)
• Connect headphones
with a 6.3 mm jack
plug to the PHONES
socket 18.
• The sound level is
adjusted with the
LEVEL control 21.
10

PROGRAMMING ®
STOR I N G A PROGRAMME (PRG and 1-0) _
You can store 30 tracks from each CD in any required sequence in a programme.
FULL lights up if you exceed the maximum of 30 tracks.
• In STOP mode, press PRG (p r ogramme) 4 to open the memory.
- PROGR lights up and iummi starts flashing.
• Key in the required numbers, every number you key in will be directly included in the
programme.
- Each time you key in (= store) a track number, the number of tracks and the playing
time of your programme will be shown under TRACK and TOTAL TIME.
i S fSS'S^
i ^
- The track number indicator always shows which numbers have been stored.
• Press PRG (programme) to quit the PROGRAMME mode.
• Press PLAY/REPLAY 8 to play the programme.
USE O - 9 lights up if you press bMM or 9 while programming.
CHECKING THE PROGRAMME (REVIEW)
• Press REVIEW 77 prior to, during or after pro¬
grammed play,
~ REVtEWhghts up.
- Ail the numbers
appear in the pro¬
grammed sequence
under TRACK.
- Under TRACK TIME you will see the playing
time of each track
NO PROGRAM lights up if no track numbers have
yet been stored
With REVIEW you can proceed more rapidly to
the next block of information.
PLAYING THE PROGRAMME (PLAY/REPLAY)
• Press PLAY/REPLAYS
- Playback starts with the first number of the pro¬
gramme
All keys (except EDIT 12, PRG(programme) 4,
CLR(clear) Sand PEAK SEARCH 77) can be used
during programmed play.
Search for a particular passage is only possible
within the track being played.
ERASING A PROGRAMME
( S TOP/CP, CLR or OPEN/CLOSE) _
In PLAY mode:
• Press OPEN/CLOSE 10 or STOP/CP 7 (twice).
In STOP mode:
• Press OPEN/CLOSE 70, CLR(clear) 6 or
STOP/CP 7.
- The programme has now been erased.
ERASING A TRACK FROM THE
PROGRAMME (CLR)
• Press REVIEW 77 before or after programmed
play (STOP mode).
- EEI//EW lights up.
- All the numbers appear in the programmed
sequence under TRACK.
• Press CLR(clear) 6 a s soon as the number you
wish to erase appears.
- The number disappears from the number indi¬
cator; it has now been erased.
- The display shows
the remaining tracks
and programme time
for a few seconds.
NO PROGRAM lights up if no track numbers have
yet been stored.
3 a H 5
4 10,30..
11
English

English
<§D EDIT
The EDIT function has two recording modes in which you can store the recording time of
the tape in the player memory.
EDIT NORMAL - The player will determine which tracks fit on each side of the tape and
J will stop after the last track. The tracks will be recorded in the order in which they appear
on the CD or in the programme.
EDIT OPTIMAL - The player now calculates the combination of tracks that will optimize
the use of available recording time.
NOTE!
- The EDIT function cannot be used for CDs containing more than 30 tracks.
_ The - VOLUME + keys (on the remote control) may not be used during recording as
they affect the strength of the signal from the player.
RECORDING IN THE EDIT MODE _
• If required you can first search the loudest pas¬
sage on the CD or in the programme and adjust
your recording device. This can also be done
after selecting the recording mode and the
recording time.
For this see ’SEARCHING THE LOUDEST PAS¬
SAGE (PEAK SEARCH)’ on page 10.
• In STOP mode, press EDIT 72 to activate the
EDIT mode.
- The display shows NORMAL (default setting).
• If required you can insert an extra pause
between the various tracks by pressing AUTO
SPACE 20.
- SPACE then lights up.
• With Syou can now select OPT(imal),
CANCEL or NORMAL again.
- The display shows OPT(imal), CANCEL, or
NORMAL again.
• Press EDIT 72 to store the required recording
mode (NORMAL or OPTimal).
- If you select CANCEL, the EDIT mode will be can¬
celled and the player will go back to STOP mode.
- As soon as you have stored the recording
mode the display shows C90 (default setting).
• With »\ 9 you can now select the
required recording time:
C100. Cl05, Cl20, C30, C45, C60. C75 or COO.
Other recording times can be selected using
the 1-0 digit keys 5.
In EDIT NORMAL mode the recording time
must be at least equal to the playing time of
the first track on the CD or in the programme.
In EDIT OPT(imal) mode the recording time
must be at least equal to the playing time of the
shortest track on the CD or in the programme.
- WRONG TIME lights up if you select a ’wrong’
time.
• Press EDIT 72 to store the required recording
time.
- The CD player will now go back to STOP mode
- The track number indicator shows which tracks
fit onto side A of the tape. The number of tracks
and their playing time
will be shown under
TRACK and TOTAL
TIME.
• You can now record the entire CD or a programme
from it.
• Press PLAY/REPLAY 8.
- The numbers for side A of the tape will be
played one after the other. If AUTO SPACE has
been selected, after each track an extra pause
of 4 seconds (AUTOSPACE) will be inserted.
- After the last track that fits on side A of the
tape, the CD player will go into PAUSE mode;
PAUSE lights up.
- The track number indicator shows which tracks
fit onto side B of the
tape. Under TRACK
you will see the num¬
ber of the first track
to be recorded.
• Turn the tape over or select the tape travel
direction for side B.
• Press PLAY/REPLAY 8.
- The remaining tracks will now be played.
- After the last track play will stop, EDIT CAN¬
CELLED lights up.
HAC
r\A~ nr.
WU.-i | {
n n n
1
« 5. S J
U: u u
NOTE!
- As soon as you press PLAY/REPLAY Sthe other
player functions will temporarily be switched
off to prevent the recording being interfered
with; EDIT ACTIVE lights up if you press one of
the other buttons during recording.
- You can quit the EDIT mode by pressing
STOP/CP 7 or OPEN/CLOSE 70; EDIT CAN¬
CELLED then lights up.
- EDIT NOT POSSIBLE lights up if you try to
record a CD containing more than 30 tracks.
12

ADDITIONAL INFORMATION <§D
MAINTENANCE _
The CDs
• Never write on the printed side of a CD.
• Do not attach any stickers to the CD.
• Keep the shiny surface of the
of the disc clean
Use a soft Imt-free cloth and
always wipe the disc in a
straight line from centre to
edge
• Never use cleaning agents
for conventional records.
• Detergents or abrasive cleaning agents should
not be used either.
The player
• A chamois leather slightly moistened with
water is sufficient for cleaning the player.
• Do not use cleaning agents containing alcohol,
spirits, ammonia or abrasives.
RECYCLING _
Please observe the local regulations regarding
the disposal of packing materials, exhausted
batteries and old equipment.
7. All redundant packaging material has been
omitted We have done our utmost to
make the packaging easy separable into
three mono-materials:
- cardboard (box)
- expandable polystyrene (buffer)
- polyethylene (bags, protective foam
sheet)
2. Your set consists of materials which can be
recycled if disassembled by a specialized
company
3. Do not dispose of exhausted batteries with
your household waste.
13
English

English
<§D TROUBLESHOOTING
If a fault occurs, run through the points listed below before taking your player for repair.
If the fault remains, try to clear it by switching the player off and on again . If this also fails to help,
consult your dealer.
Under no circumstances should you repair the player yourself as this will invalidate the
guarantee!
SYMPTOM
POSSIBLE CAUSE
REMEDY
- Playback of the CD does not
start or interruption of play¬
back.
- The CD has been loaded
upside down.
- No CD inserted.
- The CD is badly scratched or
dirty.
- Moisture condensation on
the lens.
• Reload the CD, label side up
• insert a CD, label side up.
• Clean the CD with a soft,
lint-free cloth.
• Leave the CD player in a
warm environment until the
moisture evaporates.
- Sound skips (at the same
part).
- The CD is dirty. • Clean the CD with a soft,
1 lint-free cloth.
- The CD skips tracks.
- The CD is damaged or dirty. • Replace or clean the CD.
- Playback does not start from
the first track.
- PRG (programme) or • Switch off REPEAT or clear
SHUFFLE activated. programme.
- No sound or bad sound.
- Loose or wrong connections. • Check connections.
- Strong magnetic fields near • Find another place for the
the CD player. unit or change connections.
- Volume is too low.
- Sound level has been
adjusted too low with the
-VOLUME + keys on the
remote control.
• Adjust sound level.
- No sound or bad sound on
headphones.
- Level control set to - posi¬
tion.
- Headphones plug is dirty.
♦ Set level control
• Clean plug
- Remote control does not
function.
- Batteries are empty.
• Replace the batteries
- Remote control commands
are not properly received.
- The distance between
remote control and
CD player is larger than 10
metres.
• Use remote control receiver
EM 2200/2201.
• Reduce the distance
between remote control and
CD player.
14

NOTES
95

TECHNICAL DATA
TECHNISCHE PATEN (typisch)_®
Typical Audio Performance
Frequency range:,.......2 Hz - 20 kHz
Amplitude linearity:....0.1 dB (20 Hz - 20 kHz)
Phase linearity:............ 3° (20 Hz - 20 kHz)
Dynamic range:.....90 dB (1kHz)
Signal-to-noise ratio:..> 100 dB (1 kHz,)
Channel separation:.....90 dB (1kHz)
Total harmonic distortion:....,...0.003% (1kHz)
D/A conversion:..............Bitstream conversion
Audio output level:..........2 Vrms
Impedance PHONES socket:...............30 - 600 ohms
Power supply
Mains voltage and frequency:
see the type plate on the rear of the player
Power consumption:..........10 W approx
Safety requirements:........IEC 65
Cabinet
Material/fimsh:..... . m e tal and polystyrene
Dimensions (w x h x d):..435 x 106 x 300 mm
Weight:........5 kg approx.
Frequenzumfang:.....
Amplitudenlinearitat:
Phasenlinearitat:.
Dynamikumfang:.....
Storabstand:.............
Kanaltrennung:........
Klirrfaktor..
......2 Hz-20 kHz
.0,1 dB (20 Hz -20 kHz)
.3° (20 Hz-20 kHz)
.....SO dB (1kHz)
.>100 dB (1kHz)
....90 dB (1kHz)
.0,003% (1kHz)
Digital/Analog Umsetzung: Bitstream Umsetzung
Audio-Ausgangssignal:.....2 V e ff
Kopfhorer-lmpedanz:..30 -600 Ohm
Stromversorgung
Netzspannung und -frequenz: siehe Typenschild an
der Ruckseite des Spielers.
Leistungsaufnahme:.ca. 10 W
Sicherheitsanforderungen:.............entspricht IEC 65
Gehause
Material:........Metal! und Polystyroi, mit Zierteilen
Abmessungen (B x H xT):..,......435 x 106 x 300 mm
Gewicht:...ca. 5 kg
Anderungen vorbehalien
Subject to modification
This Compact Disc player complies with radio
interference requirements as laid down in EC
regulations.
CARACTER1STIQUES TECHNIQUES ©
Caracteristiques audio (typiques)
Bande passante:.........2 Hz - 20 kHz
Lineante d'amplitude:.........,,.0,1 dB (20 Hz - 20 kHz)
Linearity de phase:...,...3° (20 Hz - 20 kHz)
Dynamique:. 9 0 dB (1 kHz)
Rapport signal/bruit:....> 100 dB (1kHz)
Separation des voies:..90 dB (1 kHz)
Distorsion harmonique totale:.....0,003% (1kHz)
Conversion numerique/analogique:
................convertisseur Bitstream
Signal de sortie audio:..................2 V e ff
Impedance du casque a raccorder:
.....30-600 ohms
Dieses Gerat entspricht den Funkentstorvor -
schriften der Europaischen Gemeinschaft .
Hiermit wird bescheinigt, daft dieses Gerat in
Ubereinstimmung mit den Bestimmungen der
Amtsblattverfugung 1046/1984 funkentstort ist.
Der Deutschen Bundespost wurde das
Inverkehrbringen dieses Gerates angezeigt und
die Berechtigung zur Uberprufung der Serie auf
Einhaltung der Bestimmungen eingeraumt.
Alimentation
Tension d'alimentation et frequence du secteur:
reportez-vous a la plaquette signsletique a I'arriere
du lecteur
Consommation electnque:....env. 10 W
Conditions de securite:....C.E.I. 65
Boitier
Matiere/finition:.metal et polystyrene avec
liveurs
Dimensions (l x h x p): ..............435 x 106 x 300 mm
Poids:.......env. 5 kg.
Sous reserve de modifications
Ce lecteur de disques compacts satisfait aux pre¬
scriptions de la CE en matiere de deparasitage
radio.
96

TECHN1SCHE GEGEVENS _<jg)
Audio-specificaties (typisch)
Frequentiegebied .2 Hz - 20 kHz
Amplitude-hneariteit . 0,1 dB (20 Hz-20 kHz)
Fasedineanteit* .3° (20 Hz - 20 kHz)
Dynamisch bereik .90 dB (1kHz)
Signaal/ruisverhouding .> 100 dB (1kHz)
Kanaalscheidmg 9 0 dB (1 kHz)
Totale harmonische vervorming . .. 0,003% (1 kHz)
Digitaai/analoog-omzettmg Bitstreanvomzetting
Audio-uitgangssignaal .2 Vrms
Impedantie PHONES-uitgang.30 -600 ohm
Voeding
Netspanmng en -frequence zie het typeplaatje op
de achterkant van de speler
Opgenomen vetmogen .ca 10 W
Veiligheidseisen .IEC 65
Behuizing
Matenaal/afwerking
metaal en polystyreen met siermatenalen
Afmetingen (b x h x d) . .-435 x 106 x 300 mm
Gewicht .ca 5 kg
Wijzigingen voorbehouden
Deze Compact Disc-speler voldoet aan de radios -
toringseisen zoals deze door de EG zijn
opgelegd.
DATOS TECNICOS _<J)
specificaciones (nominales) de audio
Margen de frecuenctas .2 Hz - 20 kHz
Lmealidad de la amphtud .. ..0,1 dB (2 Hz - 20 kHz)
Lineahdad de la fase .3° {20 Hz - 20 kHz)
Margen dmamico .90 dB (1kHz)
Relacion senal/rutdo.> 100 dB (1kHz)
Separacion de canales .90 dB (1 kHz)
Distorsion total armomca .0,003% (1kHz)
Conversion digital/analogica
transformacion Bitstream
Senal salida de audio- . -.-..2 V rrns
Impedancia de la salida PHONES'.30 - 600 onm
Alimentacion
Tension y frecuencia de red ver la placa de tipo
detras del reproductor
Consume de potencia . unos 10 W
Normas de segundad .IEC 65
Caja
Material/acabado metal y poliestireno con materi-
ales decorativos
Dimensiones (an x al x pr) . ... 435 x 106 x 300 mm
Peso . .unos 5 kg
_ ©
Este aparato Ileva los elementos antiparasitarios
necesarios para cumplir con las norm as que se
establecen en elAnexo ¥ del Reglamento sobre
Perturbaciones Radioelectricas e Interferencias
aprobado por el Real Decreto 138/1989 (B.O.E. de 9
de Febrero 1989).
DATI TECN1C1 _®
Specificazioni audio (tipiche)
Risposta in frequenza.2 Hz - 20 kHz
Amplitudine-lineanta;.0,1 dB (20 Hz - 20 kHz)
Fase-hneanta: .3° (20 Hz - 20 kHz)
Gamma dinamica .90 dB (1 kHz)
Rapporto segnale/disturbo .. .. > 100 dB (1kHz)
Separazione de* canah:....90 dB (1 kHz)
Distorsione armomca totale..0,003% (1 kHz)
Conversione D/A.conversione Bitstream
Uscita audio-... ,.2V frns
Impedenza uscita PHONES;.30-600 Onm
Alimentazione
Tensione e frequenza di rete ved. !a targhetta sul
retro del lettore
Potenza assorbita ..10 W circa
Norme dt sicurezza'. .IEC 65
Mobile
Materiale/finitura'.metalio e poiistirene con pr
decorativi
Dimension! (I x a x p) . 435 x 106 x 300 mm
Peso......5 kg circa.
Tutti / diritti di modifiche riservati
Questo lettore di Compact Disc risponde alle esi-
genze imposte dalle normative della C.E. circa le
interferenze radio.
_ NORME DI SICUREZZA _
Questo apparecchio corrisponde alle norme di
sicurezza VDE 0860 e quindi alle norme inter-
nazionali IEC 65 risp. le CEE 1.
L'appareccbio e con forme a IDM-04-1989
(Direttiva CEE/87/308) sulla soppressione dei
radiodisturbi.
Salvo modificaciones sin previo aviso
Este reproductor de discos compactos cumple
las normas para interferencias de radio estable-
cidas por la CE.
97

TEKNISKE DATA
(DK)
Lyd performance (typisk)
Frekvensgang:...,...2 Hz - 20 kHz
Amplitude liniaritet:.......0,1 dB (20 Hz - 20 kHz)
Fase liniantet:......3° {20 Hz-20 kHz)
Dynarruk:......90 dB (1 kHz)
Signal/stoj:...100 dB (1 kHz)
Kanaladsktllelse:...........90 dB (1 kHz)
Total harmonisk forvraengning:..0,003% (1 kHz)
D/A-konvertering:.............Bitstream konvertering
Lydudgangsniveau:.........2 V rrns
Impedans for PHONES-bosning:.30 - 600 ohm
TEKN1SET T1EDOT _
Aanentoisto (tyypillinen)
Taajuusalue:.......2 Hz - 20 kHz
Amplitudilineaansuus: ...0,1 dB (20 Hz - 20 kHz)
Vaihelineaarisuus:......3° (20 Hz - 20 kHz)
Dynamiikka:........90 dB (1 kHz)
Srgnaali-kohinasuhde:....> 100 dB (1 kHz)
Kanavaerotus:....,..90 dB (1 kHz)
Harmoninen sard:...0,003% (1 kHz)
D/A-muunto:.......Bittivirtamuunto
PHONES-liitannan impedanssi: ..30 - 600 ohmla
Stnamforsyning
Lysnetspanding og -frekvens: Se typeskiltet pa
bagsiden af afspilleren
Stromforbrug:.......Ca. 10 W
Sikkerhedskrav:.....IEC 65
Virtalahde
Verkkojanmte ja -taajuus: katso soittimen takana
olevasta arvokilvesta
Tehontarve:.....noin 10 VV
Turvallisuusnormit:....IEC 65
Kabinet
Materiale/finish:
Metal og poiystyren med profiler
Dimensioner (b x h x d):.„.435 x 106 x 300 mm
Vaegt:..........ca. 5 kg
Kotelo
Materiaali/viimeistety:.metalli ja poiystyreeni
Mitat (I x k x s):.435 x 106 x 300 mm
Paino:..... noin 5 kg
Oikeus muutoksiin varataan
Ret til aendringer forbeholdes
Luokan I laserlaite
Dette apparat overholder det gaeldende EF-direk-
tiv vedrorende radiostoj.
Klass 1 laserapparat
TEKN1SKA DATA
Ljuddelen
Frekvensomfang:.,..
Amplitudawikelse:...
Fasawikelse:..
Dynamik:..
Signal/brusfbrhallande:.
Kanalseparation:..
Harmonisk distortion THD:
D/A-omvandling;..
Utsignal:..
Utimpedans PHONES:......
.2 Hz-20 kHz
.0,1 dB (20 Hz-20 kHz)
.......3° (20 Hz-20 kHz)
.90 dB (1 kHz)
..> 100 dB (1 kHz)
..90 dB (1 kHz)
..0,003%
..Bitstream-omvandling
..-. 2
.30 - 600 ohm
Natdelen
Natspanning och natfrekvens: se typskylten pa
apparatens baksida
Effektforbrukningi:..... . c irka 10 W
Sakerhetsforeskriftenenligt SEMKO och IEC 65
Allmanna data
Material:....metall och polystyrene med profiler
Dimensioner (b x h x d):............435 x 106 x 300 mm
Vikt:.......................cirka 5 kg
93
Reservation for eventuella andringar.
Klass 1 laserapparat

CD 740
Printed in Slovenia
TCtext/RR0194/1