Philips CD1301S/73 User manual

What’s in the box
Handset
CD 130
Base station
CD 130 or CD 135
Power supply
unit
Line cord
Quick start guide User manual
CD 130 or CD 135
1Connect
Connect the base station
A
OInsert the plug of the power
cord into the socket on the
rear of the base station.
OInsert the plug of the line
cord into the socket on the
rear of the base station.
OPlug the power supply unit
into your power outlet.
OPlug the line cord into the
line socket.
2Install
Always use rechargeable batteries.
Insert batteries
Guarantee
+
-
+
-
Rechargeable
batteries
Always use the cables and
batteries that came with your
phone.
In multipack sets you will find additional handsets, chargers power supplies,
line cords and batteries.
OR
A
Charge handset for
24 hours
B
To set the date and time
1. Press .
2. Press Down to reach CLOCK/ALARM.
3. Press to display DATE & TIME.
4. Press and enter the current
date.
5. Press and enter the current
time.
6. Press to confirm the settings.
3Enjoy
To make a call
Press and dial the number.
TIP :You can predial the number before seizing the line.
During a call, press 2 times to activate the handset loudspeaker.
To answer a call
Press .
To adjust earpiece volume while on line
Press Up or Down to increase or decrease the volume.
To set the handset ring melody
1. Press and press Down to reach PERSONAL SET.
2. Press , HANDSET TONE is shown.
3. Press and scroll Down to reach RING MELODY.
4. Press , the melody is played.
5. Press Up or Down to browse the list of melodies.
6. Press to confirm your choice.
3111 285 28441
To save a name & number in the phonebook
1. In idle mode, press ,PHONEBOOK is shown.
2. Press , ADD NUMBER is shown.
3. Press , ENTER NAME is shown.
4. Enter the name and press , ENTER NUMBER is shown.
5. Enter the number and press to save the number.
Handset
CD 135
OR
OR
QSG CD130-135_Master UK_6pages.qxd 12.01.2006 17:45 Seite 1

Welcome
Quick start guide
1Connect
2Install
3Enjoy
philips
Problem
OCheck the connections.
OUse the line cord provided in
the box.
OTry to place the base station at
least one metre away from any
electrical appliances.
OMake sure the product is plugged.
ORecharge the batteries.
OCheck you have one DSL filter
plugged directly on each line
socket used in the house.
OCheck the modem and the phone
are plugged in correct filter slot
(one specific for each).
OFilters can be defective, replace
it and make another test.
Troubleshooting
For expanded overview see user manual.
Tip
ONo dialling tone.
OPoor audio quality.
ONo symbol on the display.
ONo Caller ID, poor connection
quality with broadband DSL
Internet.
Need help ?
User manual
See the user manual that came with your CD 130 or CD 135.
Online help
www.p4c.philips.com
To set or change the alarm clock settings
1. Press and press Down to reach CLOCK/ALARM.
2. Press and press Down to reach SET ALARM.
3. Press ,scroll to select OFF or ON ONCE or
ON DAILY.
4. Press to confirm.
If you select ON ONCE or ON DAILY :
Enter the time and press to confirm.
To rename a handset
1. Press and press Down to reach PERSONAL SET.
2. Press and press Down to reach HANDSET NAME.
3. Press and enter the name (text entry, see manual).
4. Press to confirm.
TIP :When the alarm rings, press any key to stop the alarm.
Listen to new messages recorded on answer phone
When new messages are recorded on the answering machine, the icon
is flashing on the handset display and the LED on the base
CD 135 blinks.
Press on the handset. Playback of the newest message will
begin.
TIP : for details about answer machine functions,
see user manual CD 135.
QSG CD130-135_Master UK_6pages.qxd 12.01.2006 17:45 Seite 2