Quick start guide
Installation CDROM
Internet connec-
tion (broadband
recommended)
Skype installed on
your PC and a
Skype account
(use the Skype
version provided
on the installation
CD for the hand-
set to work pro-
perly).
A desktop or a laptop
with free USB port
1Install
Install the software
OInsert the installation CD into the
PC’s CD ROM (or DVDROM)
drive
OThe installation program will start
automatically
OFollow instructions on the screen.
2Connect
Once the drivers and sofware installed !
Connect the line
A
OConnect the telephone line cord
to the phone socket on the
bottom of the base unit and to
the wall phone socket.
3111 285 29692
Battery door
2 AAA battery
Base station
Line cord
Insert batteries
B
OPlace the 2 rechargeable NiMH
AAA batteries, observing their
polarities, into the battery
compartment on the handset.
OSlide the battery door firmly into
place.
Connect the charger
C
OInsert the plug of the power cord
into the socket on the bottom of
the charger.
OPlug the power supply unit into
your power outlet.
Charge handset
D
OBefore first use, put the handset
on the charger and charge
batteries for 24 hours minimum.
OTo set the language of your
handset, press any key when you
see WELCOME.
OSelect your country and press
OK.
A telephone line
In multipack sets you will find additional handsets, chargers with their power supply
and additional rechargeable batteries.
During the installation you will be asked to:
Connect USB plug
OConnect the USB plug directly to
your PC’s USB slot.
Finish installation
C
Use the Skype version provided on
the installation CD for the handset
to work properly.
OClick on Quit.
ORemove the installation CD from
the PC’s CDROM drive.
Go on following instructions on
the screen.
Connect to main supply
OInsert the plug of the power cord
into the socket on the bottom of
the base unit
OPlug the power supply unit into
your power outlet.
A
B