Philips CD5650B/22 User manual

Register your product and get support at
www.philips.com/welcome
Quick Start Guide
CD560
CD565
1
2
Printed in China
Install
Enjoy
Troubleshooting Welcome to Philips
Need help?
Check your phone connections.•
The handset is out of range. Move it closer to the base station.
The signal icon ashes.
The handset is out of range. Move it closer to the base station.•
If the handset displays [UNREGISTERED], register the handset.
The caller ID does not display.
The service is not activated. Check with your service provider.•
The caller’s information is withheld or unavailable.
For more information, see the User Manual.
No dialing tone
Register your product at www.philips.com/welcome
Refer to the User Manual that came with your new phone.
www.philips.com/support
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole
or in part is prohibited without the written consent of the copyright owner.Trademarks
are the property of Koninklijke Philips Electronics N.V. or their respective owners.
User Manual
Online help
0168
The ECO mode reduces the transmission power of the handset and base station.
1 Press menu.
2 Select [ADVANCED SET] > [ECO], then press [SELECT] to conrm.
3 Select the new setting, then press [OK] to conrm.
The setting is saved.
»
»ECO is displayed instead of in standby mode
ECO mode
Note
When the• ECO mode is activated, the connection range between
the handset and the base station can be reduced.
CD560-565H_EN_QSG_V1.3

What’s in the box
R
Handset Charger
User manual
Power supply
Guarantee Quick Start Guide
Note
Caution
In some countries, you have to connect the line adaptor to the line cord, then•
plug the line cord to the line socket.
In multi-handset packs, there are additional handsets and chargers with power•
supply units.
Use only the supplied batteries and adaptor•
12Enjoy
Install
Install the handset
1 Press and dial the phone number; or
2 Dial the phone number and Press to dial out the call.
1 Press menu.
2 Select [PERSONAL SET] > [HANDSET TONES] > [RING
TONES], then press [SELECT] to conrm.
3 Select a ringtone, then press [SELECT] to conrm.
The setting is saved.
»
1 Press menu.
2 Select [PHONEBOOK] > [NEW ENTRY], then press
[SELECT] to conrm.
3 Enter the name then press [OK] to conrm.
4 Enter the number, then press [SAVE] to conrm.
When the phone rings. Press or to answer the call.
Press .
Press or to adjust the volume during a call.
1 The batteries are pre-installed in the handset. Pull the battery tape off from
the battery door before charging.
2 Place the handset on the charging cradle to power up.
R
Congure your phone (if necessary)
Make a call
Set the handset’s ringtone
Add a record
Answer a call
End a call
Adjust the earpiece volume
Set the date and time.
The phone is now ready to use.
»