Philips CD 290 User manual

CD290
CD295
Register your product and get support at
www.philips.com/welcome
Quick start guide
1Connect
2Get started
3Enjoy

What is in the box
Base station
(CD295)
Base station
(CD290)
Charger*
Power adapter* Line cord**
Handset*
User manual, quick start guide, guarantee
Note
* In multi-handset packs, there are additional handsets,
chargers and power adapters.
** In some countries, you have to connect the line adapter
to the line cord, then plug the line cord to the telephone
socket.
Caution
•Use only the supplied batteries and power adapter.

1Connect
Connect the base station
1 Connect each end of the power
adapter to:
•the DC input jact at the back of
the base station;
•the power socket on the wall.
2 Connect each end of the line cord
to:
•the telephone socket at the back
of the base station;
•the telephone socket on the wall.
For multi-handset version only:
3 Connect each end of the power
adapter to:
•the DC input jact at the back of
the base station;
•the power socket on the wall.

2Get started
Congure your phone Charge your phone
Charge 8 hours
1 The batteries are pre-installed in the handset. Pull the
battery tape off from the battery door before charging.
2 Whenusingyourphoneforthersttime,youseea
welcome message (country dependent).
3 Please set the country and language if prompted.
4 Set the date and time.
•If the time is in 12-hour format, press or key to
select [am] or [pm].
Place the handset on the base station to charge the handset.
When the handset is placed correctly on the base station, you
hear a docking sound.
»The handset starts charging.
Note
•Chargethebatteriesfor8hoursbeforerstuse.
Check the battery level
Icon Status
When the handset is off the base station/charger,
the bars indicate the battery level (full to low).
When the handset is on the base station/charger,
thebarsashuntilchargingcompletes.
Theemptybatteryiconashesandyouhearan
alert tone.
The battery is low and needs recharging.

3Enjoy
Call
•To make a call, press and dial the phone number.
•To answer a call, press when the phone rings.
•To end a call, press .
Adjust the earpiece volume
Press or to adjust the volume during a call.
Add a contact in the phonebook
1 Select [Menu] > [Phonebook] > [Add new], then
press [OK]toconrm.
2 Enter the name then press [OK]toconrm.
3 Enter the number, then press [Save]toconrm.
Record an announcement
(for CD295 only)
1 Press [Menu].
2 Select [Answ. Machine] > [Announcement], then
press [OK]toconrm.
3 Select [Answer only] or [Record also], then press
[OK]toconrm.
4 Select [Record new], then press [OK]toconrm.
5 Recording starts after the beep.
6 Press [OK] to stop recording or the recording stops after
3 minutes.
»You can listen to the newly recorded announcement on
the handset.
Listen to messages recorded on the
answering machine (for CD295 only)
cd
ea
bf
a
To turn on/off the answering machine in standby mode,
press .
b
To start/Stop listening, press .
c
To adjust the volume,
press / .
d
To pllay the previous message/Replay the current message,
press .
e
To play the next message, press .
f
To delete the current message, press .
Note
•For more information, see the Telephone answering
machine section in the user manual.

Reproduction in whole or in part is
prohibited without the written consent of
the copyright owner. Trademarks are the
property of Koninklijke Philips Electronics
N.V. or their respective owners.
All rights reserved.
© 2012 Koninklijke Philips Electronics N.V.
QSG_CD290-295
05_EN_V1.1
WK11502
0168
Welcome to Philips
Register your product at www.philips.com/welcome
Need help?
User manual
Refer to the user manual that came with your new phone.
Online help
www.philips.com/support