Philips Kala User manual

10
ILLUSTRATION
Memory key
On/Off line key
Dialling keypad
Recall and Programming
key
Microphone
Earpiece
Display
Answering machine key *
Redial key
Internal call /
music on hold key
Loudspeaker key **
Charging unit
Mains adapter
AA batteries
User guide
* Valid only if the 6822 handset is connected to a 6523 base station.
** Valid only if the 6822 handset is connected to a 6123 or 6523 base
station.
v2a6822.qxd 26/08/99 15:00 Page 10

11
English
Your telephone has all the advantages of the latest technological advances which make it even simple
and more convenient to use.
SAFETY INFORMATION
This equipment is not designed for making emergency telephone calls when the power fails. Alternative
arrangements should be made for access to emergency services.
This product may be used legally only in a country where the appropriate authority has given its
specific authorisation. This authorisation appears on a label under the base station.
The marking on the product certifies its conformity to the technical regulations for user safety and
electromagnetic disturbance which were applicable on the date of approval in accordance with
European Union directive No. N°73/23/EEC, 89/336/EEC, 91/263/EEC and 93/68/EEC.
POWER REQUIREMENTS
This product requires an electrical supply of 220-240 volts, alternating monophased current, excluding
IT installations defined in standard EN 60-950.
WARNING!
The electrical network is classified as dangerous according to criteria in the standard EN60-950.
The only way to power down this product is by unplugging the power cable from the electrical outlet.
Ensure the electrical outlet is located close to the apparatus and is always easily accessible.
To be able to make calls in the event of a power cut, it is recommended that this telephone be used as
a complement to another telephone which does not require mains power.
TELEPHONE CONNECTION:
The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined
in the standard EN 60-950).
SAFETY PRECAUTIONS:
Do not allow the handset to come into contact with water.
Do not open the handset or the base station. This could expose you to high voltages. Contact our
after-sales service for all repairs.
Do not allow the charging contacts or the battery to come into contact with conductive materials such
as keys, paper clips, rings, bracelets, etc.
Make sure you insert the batteries with their polarities in the correct position.
ENVIRONMENTAL CARE
Your telephone has been manufactured at a site certified ISO 14001 - the international standard for
environmental management systems.
Your telephone has also benefited from the Philips EcoDesign program - Environmental Conscious
Product Design - which considers the environmental impact of a product during its entire life cycle.
v2a6822.qxd 26/08/99 15:00 Page 11

12
INSTALLING YOUR TELEPHONE
CHOOSING THE POSITION FOR THE CHARGING UNIT
To reduce any risks of interference, avoid placing the charging unit less than 1 metre from another
electrical device (telephone, television, computer, etc.). The charging unit must be placed on a flat
surface.
Avoid placing the charging unit:
- in a damp room,
- near a heat source,
-near obstacles like thick walls or metal structures.
INSERTING / REPLACING THE BATTERIES
Your handset is powered by 2 rechargeable AA/R6 batteries.
If you need to replace them, you should use PHILIPS
R6 NC-P or Saft RC6 batteries.
1ðPress the top of the battery cover and slide it
downwards.
2ðInsert the batteries, taking care to respect the marked
polarities.
3ðClose the cover.
The batteries contain Cadmium and should be disposed of in accordance with the
regulations in force concerning the disposal of waste.
Never use non-rechargeable batteries. The manufacturer disclaims all responsibility if
these recommendations are not respected.
WALL MOUNTING THE CHARGER UNIT
1ðFix the screws (not supplied) as shown in the diagram.
2ðConnect the power supply cable to the charging unit.
3ðMount the charging unit on the screws.
4ðPlug the mains adaptor into the wall socket.
5ðPlace the handset on the charging unit.
Only use the cables supplied with the product.
Cd
v2a6822.qxd 26/08/99 15:00 Page 12

13
English
DESCRIPTION
HANDSET DISPLAY
Numerical
characters Telephone
icons
Displayed
Blinking
Displayed
Blinking
Displayed
Displayed
Blinking
Displayed
Blinking
Displayed
Not displayed
Blinking
Batteries charged
Batteries low
Handset being charged
Programming activated
Waiting for an answer from the base station (in the context
of registration)
Memories in use (consultation, programming).
External call in progress
External call arriving.
Internal call in progress.
Internal call arriving (connected to the base station).
Handset in receiving mode.
Handset out of range of the base station
Base station disconnected.
Handset not registered with the base station.
ICON STATE DESCRIPTION
For more details on the other functions (and ), refer to the main base station User's Guide.
v2a6822.qxd 26/08/99 15:00 Page 13

14
USING YOUR TELEPHONE
Your Philips telephone is GAP certified, nevertheless we cannot guarantee its use with other DECT
products made by other manufacturers.
You can register 4 handsets with 1 base station and 1 handset with 2 base stations.
The key (loud speaker) is active only if your 6822 base station is connected to a 6123
or 6523 base station.
The key is active only if your 6822 base station is connected to a 6523 base station.
TO MAKE A CALL
Connect the line Speak Hang up
The duration of the call is displayed.
TO ANSWER A CALL
Your telephone rings Connect the line Speak Hang up
The duration of the call is displayed.
TO REDIAL THE LAST NUMBER
Connect the line Press the Speak Hang up
Redial key *
* The last telephone number dialled is displayed and the call made.
ðDial the
number ðð
ðð ð
ðð ð
v2a6822.qxd 26/08/99 15:00 Page 14

15
English
USING YOUR TELEPHONE
TO PUT ON HOLD OR TRANSFER AN EXTERNAL CALL
During an external call, when you press you can transfer the external call to another handset.
* Your correspondent can hear the music.
** If you do not get an answer, you can press again to return to the external call
TO CALL A PARTICULAR HANDSET
A long press on key followed by or key allows you to call a particular handset.
To make an internal call, press , hang up with .
TO PROGRAMME A NUMBER IN THE MEMORY
You can programme 10 telephone numbers in the memories. Using this function, you can dial the
numbers you call regularly automatically.
* This digit corresponds to the number of the memory chosen.
If your handset does not emit the two confirmation "beeps", repeat the whole recording operation.
TO CALL A NUMBER FROM THE MEMORY
For more details on how to use your answering machine, refer to the 6523 User's
Guide.
REMINDER: To use the answering machine, the 6822 handset must be
connected to a 6523.
ð ð
ðBeepsð
Dial the
number to
be
programmed
ð
Programming Memory Confirm
ð ð
On handset no 1 *
All the other
handsets ring ** On another handset
Connect the line or hang up
Select a digit*
from
to
ðð ð The number is
dialled
Digit associated with
the number you want
to dial
to
Connect the line Memory
v2a6822.qxd 26/08/99 15:00 Page 15

16
For handsets from other manufacturers or for models other than the ,
please refer to the your base station user manual.
PROGRAMMING YOUR TELEPHONE
Your telephone has programmable functions. To change the settings, refer to the table below. The
options you choose will be saved even if there is a power cut. A beep confirms program changes.
FUNCTION KEY COMBINATIONS COMMENTS
++ +
+ + +
+ + +
Option no. 1
Option no. 2
Option no. 3
uMelodies
++ +
+ + +
+ + +
Low
Mid
High
uHandset melody volume
++ +
+ + +
+ + +
Low
Mid
High
uEarpiece volume
++ Code ∆+
uRegister this handset The ∆code is indicated on
the label on the bottom of
the base station (4 digits).
++ Code ∆+
uUn-register this handset
ACOUSTIC FUNCTIONS
Before registering a handset, unplug the base station mains adapter and then plug it in again.
REGISTERING/UN-REGISTERING A HANDSET TO A BASE STATION
v2a6822.qxd 26/08/99 15:01 Page 16

17
English
PROBLEMS YOU MAY ENCOUNTER WITH YOUR TELEPHONE
The table below lists the problems you may encounter when using your Philips telephone.
PROBLEM CAUSE SOLUTION
There is no dialling tone. uThe base station has not been
connected to the telephone line
correctly.
uCheck the connections
(see page 16).
uThe handset battery is flat. uPlace the handset on the base
station and wait for at least
12 hours.
uYou are too far from the base
station.
uGo nearer to the base station.
These is no dialling tone even
though you have left the handset on
the base station for at least
12 hours.
The batteries are worn out. Contact your local Philips dealer
for new batteries.
v2a6822.qxd 26/08/99 15:01 Page 17