Philips S9H User manual

S9H
Register your product and get support at
www.philips.com/welcome
Quick start guide

1Get started
Connect the charger Charge your phone
Charge 5 hours
Configure your phone
1 Press until you see the Philips wordmark.
2 Set the language.
3 Set date and time.
> 84%
68% - 84%
52% - 68%
36% - 52%
20% - 36%
< 20%
Flashing: low battery
Scrolling: charging in progress

Register addi-
tional handsets
2
You can register up to 4 additional handsets to the
base station.
1 Select [Menu] > > [Registration] >
[Register], then press [OK] to confirm.
2 Press and hold on the base station for 5 seconds.
3 Enter the system PIN/passcode (0000). Press
[Clear] to make corrections. Press [OK] to
confirm the PIN/passcode.
» Registration is complete in less than 2 minutes.
The base automatically assigns a handset
number to the handset.
Note
• If the PIN/passcode is incorrect or no base is
found within a certain period, your handset
displays a notification message. Repeat the
above procedure if registration fails.
• The preset PIN/passcode is 0000. It cannot be
changed.

User manual
www.philips.com/support
For more information, refer to the S9/S9A user
manual online.
Online
Register at www.philips.com/support to get the free
Philips Phone Manager software for your computer
and the latest phone software for your phone.

Reproduction in whole or in part is prohibited
without the written consent of the copyright
owner. Trademarks are the property of Koninklijke
Philips Electronics N.V. or their respective owners.
All rights reserved.
© 2012 Koninklijke Philips Electronics N.V.
QSG_S9H
12_EN_V1.0
WK12423
0168