Philips SPF1207/05 User manual

Register your product and get support at
SPF1207
PhotoFrame
EN User manual

1EN
English
9 Product information 16
10 Frequently asked questions 17
11 Glossary 18
Need help?
Please visit www.philips.com/welcome where
you can access a full set of supporting materials
such as user manual, the latest software updates
and answers to frequently asked questions.
Contents
1 Important 2
Safety 2
Safety precautions and maintenance 2
Notice 2
End of life disposal 2
Recycling Information for Customers 3
Recycling 3
North Europe Information
(Nordic Countries) 3
Banned Substance Declaration 3
2 Your PhotoFrame 4
Introduction 4
What’s in the box 4
Overview of your PhotoFrame 5
3 Get started 6
Install the stand 6
Connect power 6
Turn on the PhotoFrame 7
Turn off the PhotoFrame 7
Transfer photos 7
4 Display photos 9
Manage slideshow and photos 9
5 Browse and manage photos 10
6 Clock and calendar 11
7 Setup 12
Select an on-screen language 12
Adjust display brightness 12
Set time and date 12
Set display auto on/off 13
Select slideshow frequency 13
Select a slideshow transition effect 13
View the status of the PhotoFrame 14
Restore factory defaults 14
8 Upgrade the PhotoFrame 15

2EN
Notice
This product is in compliance with the
essential requirements and other relevant
provisions of Directives 2006/95/EC (Low
Voltage), 2004/108/EC (EMC).
The making of unauthorized copies of
copy-protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
End of life disposal
Your new product contains materials that•
can be recycled and reused. Specialized
companies can recycle your product to
increase the amount of reusable materials
and to minimize the amount to be
disposed of.
Please nd out about the local regulations •
on how to dispose your old monitor from
your local Philips dealer.
(For customers in Canada and U.S.A.)•
Dispose the old product in accordance to
local-state and federal regulations.
For additional information on recycling contact
www.eia.org (Consumer Education Initiative).
1 Important
Safety
Safety precautions and maintenance
Never touch, push, rub or strike the•
screen with hard objects as this may
damage the screen permanently.
When the product is not used for long•
periods, unplug it.
Before you clean the screen, turn off and•
unplug the power cord. Only clean the
screen with a soft, water-damp cloth.
Never use substances such as alcohol,
chemicals or household cleaners to clean
the product.
Never place the product near naked•
ames or other heat sources, including
direct sunlight.
Never expose the product to rain or•
water. Never place liquid containers, such
as vases, near the product.
Never drop the product. When you drop•
the product, it will be damaged.
Ensure that you install and use services or•
software only from trustworthy sources
free of virus or harmful software.
This product is designed for indoor use•
only.
Only use the supplied power adaptor for•
the product.

3EN
English
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
North Europe Information
(Nordic Countries)
VARNING:
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE
OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR
DU STÄLLER DIN UTRUSTNING PÅPLATS.
Placering/Ventilation
ADVARSEL:
SØRG VED PLACERINGEN FOR, AT
NETLEDNINGENS STIK OG STIKKONTAKT
ER NEMT TILGÆNGELIGE.
Paikka/Ilmankierto
VAROITUS:
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO
VOIDAAN TARVITTAESSA HELPOSTI
IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADVARSEL:
NÅR DETTE UTSTYRET PLASSERES, MÅ
DU PASSE PÅ AT KONTAKTENE FOR
STØMTILFØRSEL ER LETTE Å NÅ.
Banned Substance
Declaration
This product complies with RoHS.
Class II equipment symbol:
This symbol indicates that this product has a
double insulation system.
Recycling Information for Customers
Philips establishes technically and
economically viable objectives to optimize
the environmental performance of the
organization’s product, service and activities.
From the planning, design and production
stages, Philips emphasizes the importance of
making products that can easily be recycled.
At Philips, end-of-life management primarily
entails participation in national take-back
initiatives and recycling programs whenever
possible, preferably in cooperation with
competitors.
There is currently a system of recycling up and
running in the European countries, such as
The Netherlands, Belgium, Norway, Sweden
and Denmark.
In U.S.A., Philips Consumer Lifestyle North
America has contributed funds for the
Electronic Industries Alliance (EIA) Electronics
Recycling Project and state recycling initiatives
for end-of-life electronics products from
household sources. In addition, the Northeast
Recycling Council (NERC) - a multi-state
non-prot organization focused on promoting
recycling market development - plans to
implement a recycling program.
In Asia Pacic, Taiwan, the products can
be taken back by Environment Protection
Administration (EPA) to follow the IT product
recycling management process, detail can be
found in web site www.epa.gov.tw.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:

4EN
2 Your
PhotoFrame
Congratulations on your purchase, and
welcome to Philips! To fully benet from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With Philips Digital PhotoFrame, you can display
JPEG photos in high quality directly from your
memories cards.
What’s in the box
Philips Digital PhotoFrame•
Stand•
AC-DC power adaptor•
User manual•
Registeryour product and get support at
www.philips.com/welcome
PhotoFrame
User Manual

5EN
English
hStand hole
iWall mounting hole
Overview of your
PhotoFrame
aBACK|POWER
Hold to turn on/off the PhotoFrame•
Press to go to the home screen•
Press to go back•
b/ / /
Press to select the upper/lower/•
right/left option
cOK
Press to play/pause slideshow•
Press to conrm a selection•
dMENU
Press to enter/exit a menu•
eKensington lock
fSD/MMC/MS/MS Pro
Slot for an SD/MMC/MS/MS Pro•
card
gDC
Socket for the AC-DC power•
adaptor
i
a
c
b
d
e
fg
h

6EN
Connect power
Note
When you position the PhotoFrame, ensure•that the power plug and outlet are easily
accessible.
1Connect the supplied power adaptor to:
the• DC socket of the PhotoFrame
the AC outlet•
A few seconds later, the PhotoFrame»
turns on automatically.
3 Get started
Caution
Use the controls only as stated in this user•manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install the stand
To place the PhotoFrame on a at surface,
attach the supplied stand to the back of the
PhotoFrame.
1Insert the stand into the PhotoFrame.
2Screw the stand into the stand hole
rmly.

7EN
English
Turn off the PhotoFrame
Note
You can only turn off the PhotoFrame after all•copy and save actions are complete.
To turn off the PhotoFrame, press and•
hold BACK|POWER for 2 seconds.
Transfer photos
Caution
Do not remove a storage device from the•PhotoFrame when you are transferring photos
from or to the storage device.
You can play JPEG photos on one of the
following storage device that is connected to
the PhotoFrame:
Secure Digital (SD)•
Secure Digital High Capacity (SDHC)•
Multimedia Card (MMC)•
Memory Stick (MS)•
Memory Stick Pro (MS Pro, with adaptor)•
However, we do not guarantee the operations
for all types of storage device media.
1Insert a storage device into the slot.
Turn on the PhotoFrame
Note
When you connect the PhotoFrame to a•power supply, the PhotoFrame turns on
automatically.
1When the PhotoFrame is turned off and
connected to the power supply, you can
press BACK|POWER to turn on the
PhotoFrame.
A few seconds later, the home screen»
is displayed.
For the rst time you turn on the
PhotoFrame:
The screen prompts you to select a•
language.
Press• /to select a language, and
then press OK to conrm.

8EN
A conrmation message is displayed.»
To copy photos to the PhotoFrame:
1Select [ Yes], and then press OK to
conrm.
To display photos directly:
1Select [No], and then press OK to
conrm.
2Select [Play], and then press OK.
• To remove a storage device, pull it out.

9EN
English
4 Display photos
1In the home menu, press / to select
[Play] and then press OK.
Photos are displayed in slideshow mode.»
During slideshow, press• / to display the
next/previous photo.
Manage slideshow and photos
You can take the following steps to manage a
photo in slideshow.
1During slideshow, press MENU.
A menu bar is displayed.»
2Press / to select an icon, and then
press OK.
• : Zoom in a photo
• : Rotate a photo
• : Select a display mode.
• : Save a photo
• : Delete a photo
To exit the menu bar, press• MENU again.