Philips SPF1528/05 User manual

SPF1528
www.philips.com/welcome PhotoFrame
User manual
Register your product and get support at

1EN
Need help?
Please visit www.philips.com/welcome where
you can access a full set of supporting materials
such as user manual, the latest software updates
and answers to frequently asked questions.
Contents
1 Important 2
Safety 2
Notice 2
Banned Substance Declaration 3
2 Your PhotoFrame 4
Introduction 4
Playable media 4
What's in the box 4
Overview of your PhotoFrame 5
3 Get started 6
Install the stand 6
Connect power 6
Turn on the PhotoFrame 7
Transfer photos 7
Quick menu 8
4 Display photos 9
Manage slideshow and photos 9
Manage albums and media 10
5 Play videos 11
 
6 Clock and calendar 12
Clock menu 12
7 Setup 13
Select an on-screen language 13
Adjust display brightness 13
Set time and date 13
Set SmartPower timer 14
Hibernate the PhotoFrame 14
Slideshow setting 15
View the status of the PhotoFrame 15
Restore factory defaults 15
8 Upgrade the PhotoFrame 16
9 Product information 17
10 Frequently asked questions 18
11 Glossary 19

2EN
1 Important
Safety
Safety precautions and maintenance
 Never touch, push, rub or strike the screen
with hard objects as this may damage the
screen permanently.
 When the product is not used for long
periods, unplug it.
 Before you clean the screen, turn off
and unplug the power cord. Only clean
the screen with a soft, water-damp cloth.
Never use substances such as alcohol,
chemicals or household cleaners to clean
the product.
 Never place the product near naked

direct sunlight.
 Never expose the product to rain or
water. Never place liquid containers, such
as vases, near the product.
 Never drop the product.When you drop
the product, it will be damaged.
 Ensure that you install and use services or
software only from trustworthy sources
free of virus or harmful software.
 This product is designed for indoor use
only.
 Only use the supplied power adaptor for
the product.
Notice
This product is in compliance with the essential
requirements and other relevant provisions
of Directives 2006/95/EC (Low Voltage),
2004/108/EC (EMC).
The making of unauthorized copies of copy-
protected material, including computer

recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
End of life disposal
 Your new product contains materials that
can be recycled and reused. Specialized
companies can recycle your product to
increase the amount of reusable materials
and to minimize the amount to be
disposed of.
 
on how to dispose your old monitor from
your local Philips dealer.
 (For customers in Canada and U.S.A.)
Dispose the old product in accordance to
local-state and federal regulations.
For additional information on recycling contact
www.eia.org (Consumer Education Initiative).

3EN
Recycling Information for Customers
Philips establishes technically and economically
viable objectives to optimize the environmental
performance of the organization's product,
service and activities.
From the planning, design and production
stages, Philips emphasizes the importance of
making products that can easily be recycled. At
Philips, end-of-life management primarily entails
participation in national take-back initiatives
and recycling programs whenever possible,
preferably in cooperation with competitors.
There is currently a system of recycling up and
running in the European countries, such as The
Netherlands, Belgium, Norway, Sweden and
Denmark.
In U.S.A., Philips Consumer Lifestyle North
America has contributed funds for the
Electronic Industries Alliance (EIA) Electronics
Recycling Project and state recycling initiatives
for end-of-life electronics products from
household sources. In addition, the Northeast
Recycling Council (NERC) - a multi-state

recycling market development - plans to
implement a recycling program.

back by Environment Protection Administration
(EPA) to follow the IT product recycling
management process, detail can be found in
web site www.epa.gov.tw.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products.The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Banned Substance
Declaration
This product complies with RoHS.

4EN
2 Your
PhotoFrame
Congratulations on your purchase, and

support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this Philips Digital PhotoFrame, you can
display photos in high quality and play videos

drive.
Playable media
Photo
 JPG, JPEG
 Baseline: < 8000 x 8000 pixels
 Progressive: < 800 x 600 pixels
 BMP
 > 64 x 64 pixels
Video
 Resolution: 1080p
 Bitrate: 20 Mbps
 Frame rate: 30 fps
 AVI
 Video codec: MPEG-4 (Part 2), H.264,
M-JPEG
 Audio codec: PCM (128–536 kbps,
8–48 kHz), ADPCM (32–384 kbps,
8–48 kHz), AAC (8–256 kbps, 8–48
kHz)
 TS,TMS
 Video codec: H.264
 Audio codec: LPCM (192–448 kbps,
48–96 kHz), AAC (8–256 kbps, 8–48
kHz)
 MOV, MP4
 Video codec: MPEG-4, H.264
 Audio codec: PCM (128–536 kbps,
8–48 kHz), ADPCM (32–384 kbps,
8–48 kHz), AAC (8–256 kbps, 8–48
kHz)
 DivX, Xvid, and VC1 are not supported.
What's in the box
 Philips Digital PhotoFrame
 Stand
 AC-DC power adaptor
 User manual
Registeryour product and get support at
www.philips.com/welcome PhotoFrame
User Manual

5EN
Overview of your
PhotoFrame
a BACK|POWER
 Hold to turn on/off the PhotoFrame.
 Press to go to the home screen.
 Press to go back.
b / / /
 Press to select the upper/lower/right/
left option.
c OK
 Press to play/pause slideshow.
 
d MENU
 Press to enter/exit a menu.
e USB socket
f DC
 Socket for the AC-DC power adaptor.
j
a
c
b
d
h
e
fg
i
06063UR
g SD/MMC/MS/MS Pro
 Slot for an SD/MMC/MS/MS Pro card
h Kensington lock
i Stand hole
j Wall mounting hole

6EN
3 Get started
Caution
 Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install the stand

attach the supplied stand to the back of the
PhotoFrame.
1 Insert the stand into the PhotoFrame.
2 Position the indication on the stand to the
position.
3 Turn the stand anti-clockwise 45 degrees
to the position and lock it to the

Connect power
Note
 When you position the PhotoFrame, make sure that
the power plug and outlet are easily accessible.
Connect the supplied power adaptor to:
 the DC socket of the PhotoFrame
 the AC outlet
» A few seconds later, the PhotoFrame
turns on automatically.

7EN
Turn on the PhotoFrame
Note
 When you connect the PhotoFrame to a power supply,
the PhotoFrame turns on automatically.
When the PhotoFrame is turned off and
connected to the power supply, you can press
BACK|POWER to turn on the PhotoFrame.
» A few seconds later, the home screen
is displayed.

PhotoFrame:
The screen prompts you to select a language.
 Press / to select a language, and
then press OK
Turn off the PhotoFrame
Note
 You can only turn off the PhotoFrame after all copy and
save actions are complete.
 To turn off the PhotoFrame, press and hold
BACK|POWER for 2 seconds.
Transfer photos
Caution
 Do not remove a storage device from the PhotoFrame
when you are transferring photos from the storage
device.
 Philips does not guarantee the compatibility with all
types of storage device media.
You can play photos on one of the following
storage device that is connected to the
PhotoFrame:
 Secure Digital (SD)
 Secure Digital High Capacity (SDHC)
 Multimedia Card (MMC)
 Memory Stick (MS)
 Memory Stick Pro (MS Pro, with adaptor)
 
1 Insert a storage device into the slot.

8EN
» 
 [Play Photos]: Select it to play media
on the storage device.
 [Browse]: Select it to browse media
on the storage device.
 [Copy to PhotoFrame]: Select it to
start transfer operation.
2 Select [Copy to PhotoFrame], and then
press OK.
» 
To copy photos to the PhotoFrame:
Select [Yes], and then press OK
To display photos directly:
1 Select [No], and then press OK to

2 Select [Photo], and then press OK.
 To remove a storage device, pull it out.
Quick menu
1 In the home screen, press MENU.
» The quick menu is displayed.
2 Select an option, and then press OK.
3 Follow the on-screen instructions to adjust
the brightness or view the status of the
PhotoFrame.
 To exit the quick menu, press MENU
repeatedly.

9EN
4 Display photos
1 In the home menu, press / to select
[Photo] and then press OK.
» The [Browse] interface is displayed.
2 Select a storage device and then select a
photo thumbnail.
3 Press OK.
» Photos are displayed in slideshow
mode.
 During slideshow, press / to display the
next/previous photo.
Manage slideshow and photos
You can take the following steps to manage
the photo in slideshow mode or change the
slideshow settings:
1 Press MENU.
» An option menu is displayed.
2 Select an option, and then press OK.
 [Slideshow Settings]
 [Interval]: Set the interval in slideshow.
 : Play media randomly or not.
 [Color Tone]: Select the color for the
photo.
 [Transition Effect]: Select the transition
effect.
 [Background Color]: Select the
background color.
 [Zoom]: Zoom and crop a photo.
 [Rotate]: Select an orientation to rotate
the photo.
 [Copy]: Copy the photo to another album.
 [Delete]: Delete the photo.
 [Brightness]: Move the joystick up/down to
adjust the brightness of display.