Philips SPF2017 User manual

1 2 3
© Royal Philips Electronics N.V. 2009 All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. QSG_V2.0 Printed in China
Get started Play Setup
Register your product and get support at www.philips.com/welcome
Quick start guide
SPF2017 SPF2027 SPF2047
What’s in the box
PhotoFrame Quick Start Guide AC-DC power adaptor
PhotoFrame
Stand
ENG
CD-ROM (Digital User Manual)
Frequently asked questions
4Select [Weekday] /[Weekend], and
then press OK to confirm.
5Select [Auto on] / [Auto off], and
then press OK to confirm.
To cancel [Auto on] / [Auto off ],
•select [Set On/Off] >[Off].
6Press / / / and OK to set the
time for auto-on/auto-off function, and then press OK to confirm.
Tip
Weekday: Monday 00:00 to Friday 23:59•Weekend: Saturday 00:00 to Sunday 23:59.•
5Press / / / and OK to set the
time/date, and then press OK to confirm.
Tip
When the reminder alerts, you
•can press any button once to stop
the reminder. To stop the snooze function, press the same button twice.
Set on/off a reminder 1In the main menu, select [Setup] and
then press OK to confirm.
2Select [Event Reminder], and then
press OK to confirm.
3Select a reminder, and then press
OK to confirm.
4Select [Set], and then press OK to
confirmn.
Select [On] to set the reminder
•
on, and then press OK to confirm.
To set the reminder off, select
•
[Off] and then press OK to confirm.
Set display auto on/off by time You can configure the time for the PhotoFrame to turn on or off the display automatically.
Note
Ensure that you set the current time•and date of the PhotoFrame before you set the auto on/off function.
1In the main menu, select [Setup] and
then press OK to confirm.
2Select [Smart power], and then
press OK to confirm.
3Select [Set time], and then press OK
to confirm.
1 2 3
Quick start guide
Getstarted Play Setup
Eng
PhotoFrame
(For SPF2047) Extra silver frame with design
Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control the PhotoFrame. Will the LCD be damaged, if I keep showing the same photo for a long time? No. The PhotoFrame can display the same photo continuously for 72 hours without any damage to the LCD screen. Why does my PhotoFrame not show some of my photos? The PhotoFrame suppor ts only JPEG photos. Ensure that these JPEG photos are not damaged. Why does the PhotoFrame not go into auto-off status after I set it? Ensure that you set the current time, auto-off time, and auto-on time correctly. The PhotoFrame automatically turns off its display exactly at the auto-off time. If the time has already passed for the day, it starts to enter auto-off status at the specified time from the next day. The PhotoFrame is ON but the PhotoFrame does not respond anymore. What can I do? Ensure that the PhotoFrame is turned on. Then, use a pin to trigger the RESET button located on the back to restore the system.

3Select [New reminder], and then
press OK to confirm.
A keypad is displayed.»
4To enter the new name (up to 24
characters), select an alphabet/ number and then press OK to confirm.
To switch between uppercase
•
and lowercase, select [abc] on the displayed keypad and then press OK to confirm.
5When the name is complete, select
[Enter] and then press OK to confirm.
Set event time and date
Note
Ensure that you set the current time•and date of the PhotoFrame before you set time and date for an event reminder.
1In the main menu, select [Setup] and
then press OK to confirm.
2Select [Event Reminder], and then
press OK to confirm.
3Select a reminder, and then press
OK to confirm.
4Select [Set time] / [Set date], and
then press OK to confirm.
Set time and date 1In the main menu, select [Setup] and
then press OK to confirm.
2Select [Time and Date], and then
press OK to confirm.
3Select [Set time] / [Set date], and
then press OK to confirm.
4Press / / / and OK to enter
the current time/date, and then press OK to confirm.
Set an event reminder You can create a reminder for a special event, and you can also select a photo to be displayed at a selected time.
Tip
Ensure that you set the current time•and date of the PhotoFrame before you set an event reminder.
Create an event reminder 1In the main menu, select [Setup] and
press OK to confirm.
2Select [Event Reminder], and then
press OK to confirm.
If you select [Auto fit],» the PhotoFrame extends a photo to fill the screen with picture distortion. If you select [RadiantColor], the» PhotoFrame extends the color on the edges of a photo that is smaller than the full screen to fill
the screen without black bars or aspect ratio distortion.
3 Setup Select on-screen language 1In the main menu, select [Setup] and
then press OK to confirm.
2Select [Language], and then press
OK to confirm.
3Select [Language Setting], and then
press OK to confirm.
4Select a language, and then press
OK to confirm.
Select photo background You can select a background border color for photos that are smaller than the screen of the PhotoFrame. 1In the main menu, select [Slideshow]
and then press OK to confirm.
2Select [Background Color], and then
press OK to confirm.
3Select a background color / [Auto
fi t ] / [RadiantColor], and then press OK to confirm.
If you select a background color, the» PhotoFrame displays a photo with a background color or black bar.
Display collage photos 1In the main menu, select [Slideshow]
and then press OK to confirm.
2Select [Collage], and then press OK
to confirm.
3Select [Multi], and then press OK to
confirm.
4Select a layout. 5Press (Right) to select [Photo 1]. 6Press (Right) again to access the
photo source options.
7Select a photo from a photo source. 8Repeat steps 5 to 7 until all photos
are selected for the format.
9Press to start collage display.
To stop collage display, select
•
[Slideshow] >[Collage]>
[Single] and then press OK to confirm.
Tip
If you select a collage layout,
•the PhotoFrame displays a static
collage and the slideshow mode is deactivated. If you select [Random] format, the
•PhotoFrame automatically does the
random collage base on the optimal layout of photos and displays the collages in slideshow mode.
3Select an album, and then press OK
to confirm.
Photos in the album are» displayed in thumbnail mode.
4Press to start slideshow play.
In slideshow mode, press
•
/to display the next/previous
photo. In slideshow mode, press
•
to toggle between slideshow, browse, and calendar mode.
Tip
In slideshow mode, the PhotoFrame
•displays all photos automatically.
In browse mode, the PhotoFrame
•displays the current photo and you
can press /to display the next/
previous photo. In calendar mode, the PhotoFrame
•displays photos with the calendar.
However, we do not guarantee the operations for all types of memory card media.
1Insert a storage device firmly. Photos in the storage device are displayed in slideshow mode.
To remove a storage device, pull
•
it out from the PhotoFrame.
2 Play Display photos
Note
You can play only JPEG photos on•the PhotoFrame.
1In the main menu, select [Photos]
and then press OK to confirm.
Available photo sources are displayed.»
2Select a photo source, and then
press OK to confirm.
Photos are displayed in slideshow» mode.
For other times:
1Press and hold for more than 1
second.
Help message for control keys is» displayed.
2Press any button to exit the help
message.
Photos are displayed in slideshow» mode. To turn off the PhotoFrame,
•
press and hold .
Connect a storage device
Caution
Do not remove a storage device
•from the PhotoFrame when files are
transferring from or to the storage device.
You can play JPEG photos in one of the following storage device which is connected to the PhotoFrame:
Secure Digital (SD)
•
Secure Digital (SDHC)• Multimedia Card• xD card• Memory Stick• Memory Stick Pro (with adaptor)• USB memory drive•
1Connect the power cord to the DC
socket of the PhotoFrame.
a
b
2Connect the power cord to a power
supply socket.
Turn on the PhotoFrame
Note
You can only turn off the PhotoFrame
•after all copy and save actions are
complete.
For the first time use:
1Press and hold for more than 1
second.
The language setting menu is» displayed.
2Select a language, and press OK to
confirm.
Help message for control keys is» displayed.
3Press any button to exit the help
message.
1 Get started Control buttons
Button Function
Turn on/off the PhotoF- rame Play slideshow Toggle between slideshow mode, browse mode, and calendar mode
/// Select the previous/next/
right/left item
OK Confirm a selection
Enter the main menu Enter/Exit photo menu
Install the stand To place the PhotoFrame on a flat surface, you need install the supplied stand at the back of the PhotoFrame. 1Insert the stand into the PhotoFrame. 2Screw the stand into the stand hole
firmly.
Connect power
Note
When you position the PhotoFrame,•ensure that the power plug and outlet are easily accessible.