Philips HQ7100 User manual

ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Shaver
HQ7100
07/03
PRODUCT INFORMATION
General:
- Mains operation
- World-wide automatic voltage selection
- Electronic on/off switch
- Washable
Safety information
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Voltage : 100 - 240 Volt / 50 - 60 Hz
- Motor voltage : 15 Volt
- Shaving heads : HQ8 - 4222 036 05820
- SAP coding : HQ7100
DISASSEMBLY- AND RE-ASSEMBLY ADVICE
Disassembly:
- Remove shaving unit, to prevent damaging during
repairing.
- Remove the 2 screws (A) out of the hairchamber.
- Remove the hairchamber from the body.
- Remove the 2 screws (B) on the backside of the shaver.
- Remove the cover.
- Remove the side grips.
- Remove the housing by bending the hooks with a
screwdriver.
- Take out the basic body.
REPAIR INSTRUCTION
- No specific issues
OPTIONAL (accessories)
- Pouch : 4222 036 14160

HQ7100
EXPLODED VIEW & PARTS LIST
3
7
B
11
10
12
1
2
4
5
8
9
6A
Pos Service code Description
1
2
3
4
5
4222 036 14050
4222 036 12610
4222 036 06790
4222 036 03970
4222 036 04020
4222 036 06800
4222 036 05820
4222 036 12990
Protection cap Cheetah
Bracket-assy
Power plug EUR
Power plug GBR
Power plug AUS
Power plug Can/Tw/Ven
Shaving heads
Holder-assy
Pos Service code Description
6
7
8
9
10
11
12
4222 036 12640
4222 036 12780
4222 036 12570
4222 036 12460
4222 036 02770
4222 036 12220
4222 036 12680
4222 036 11480
Hairchamber
Basic body
Grip left & right
Housing-assy
Brush
Trimmer assy
Back shell assy
Screw
= changed