Philips HQT788 User manual

ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Beard Trimmer
HQ-T788
03/02
PRODUCT INFORMATION
Features:
- Contour Tracking System; comb adapts to the contours
of the face.
- Precision Zoom Lock; for precise adjustability of the
comb in 9 lenghts between 1.5 mm and 18 mm.
- Beard length indication window.
- Pop-up precision trimmer for moustache and contouring.
- Corded mains operation and cordless rechargebale
operation possilble.
- Charging indication.
- Maintenance free cutting element: no oiling required.
- Three dimensional rounded teeth at skin side for max.
comfort.
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
Power system : 1 hour rechargeable and mains
Rechargeable:
Batteries : 1 x AA NiCd
Charging period : NiCd batteries : 1 hour
Capacity : NiCd batteries : 40 minutes
Batteryfull indication : light blinks when battery is fully
charged
Mains:
Voltage : Automatic voltage selection
(100 - 240 V / 50 - 60 Hz)
NOTES :
• In order to guarantee the longest possible working life of
the battery :
- do not charge for more than 24 hours
- do not keep the charging unit permanently plugged in
- discharge the battery completely once a year by letting the
motor run until it stops
• The appliance should be charged again, when not used for a
long period

HQ-T788
DISASSEMBLY ADVICE
REPAIR INSTRUCTIONS
- Never use again a deformed housing clamp (3).
OPTIONAL (accessories)
- No specific issues.
to replace SPRING ZOOM RING (6)
remove COMB (1)
SCREW A
COVER (7)
PROFILER (12)
COMB HOLDER (4)
ZOOM RING (5)
to replace ON / OFF KNOB (8)
BATTERY (10)
PCB (9)
MOTION CONVERTER (11)
remove COMB (1)
CUTTER (2)
HOUSING CLAMP (3)
COMBHOLDER (4)
SCREW A
COVER (7)
ZOOM RING (5)
PROFILER (12)
CAP 15
to replace PROFILER (12)
remove COMB (1)
SCREW A
COVER (7)
2-3

HQ-T788
PARTS LIST & EXPLODED VIEW
A
12
11
14
9
8
13
7
16
10
1
4
6
5
2
3
15
3-3
Pos Service code Description
1
2
3
4
5
6
7
8
9
10
4203 035 76430
4203 035 76420
4203 035 76410
4203 035 76360
4203 035 76350
4203 035 71380
4203 035 76720
4203 035 76470
4203 035 76490
4822 138 10336
comb
cutter
housing clamp
comb holder
zoomring
spring zoom ring
cover
on/off knob
PCB
battery NiCd
Pos Service code Description
11
12
13
14
15
16
4203 035 76480
4203 035 76460
4822 479 30183
4822 321 10095
4822 321 10096
4822 321 10097
4822 321 10148
4822 321 10344
4203 035 79100
4203 035 79110
motion converter
profiler
cleaning brush
cord set (EURO)
cord set (UK)
cord set (CND)
cord set (AUS/NZ)
cord set (USA)
cap
housing