Philips S91xx User manual

S91xx/S90xx

1

PlusPlus
31 2

12
3
1 2 3
4 5

1
2
2
3
3
4
4
5
1 2
34

PlusBasic
4
3
3
3MO 3
12
1
4
2
56
7 8

1M
8 9
10
4 5 6
2 31
7

S91XX, S90XX
ENGLISH 12
ESPAÑOL 40
FRANÇAIS 69
ITALIANO 98
PORTUGUÊS 127
TÜRKÇE 156

12
Introduction
Congratulations on your purchase and welcome to
Philips! To fully benet from the support that Philips
offers, register your product at www.philips.com/
welcome.
Please read this user manual, as it contains information
about the features of this shaver as well as some tips
to make shaving easier and more enjoyable.
General description (Fig. 1)
1 Comb for beard styler attachment
2 Click-on beard styler attachment
3 Click-on trimmer attachment
4 Click-on shaving unit
5 On/off button
6 Socket for small plug
7 Exclamation mark
8 Replacement reminder
9 Battery charge indicator
10 Travel lock symbol
11 Cleaning reminder
12 Replacement symbol
13 SmartClean system
14 Cap of SmartClean system
15 On/off button
16 Cleaning symbol
17 Drying symbol
18 Ready symbol
19 Charge symbol
20 Cleaning cartridge for SmartClean system
21 Adapter
22 Small plug
23 Retaining ring holder
24 Pouch
ENGLISH

Note:The accessories supplied may vary for different
products.The box shows the accessories that have been
supplied with your appliance.
Important
Read this user manual carefully before you use the
shaver and the SmartClean system. Save this user
manual for future reference.
Danger
- Keep the adapter dry.
Warning
- The adapter contains a transformer. Do not cut
off the adapter to replace it with another plug,
as this causes a hazardous situation.
- This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use
of the appliance in a safe way and understand the
hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not
be made by children without supervision.
- Always unplug the shaver before you clean it
under the tap.
Caution
- Never immerse the SmartClean system in water
nor rinse it under the tap.
- Never use water hotter than 80°C to rinse the
shaver.
- Do not use the shaver, SmartClean system, adapter
or any other part if it is damaged, as this
may
cause injury.Always replace a damaged adapter
or part with one of the original type.
ENGLISH 13

- Only use the SmartClean system with the original
cleaning cartridge.
- Always place the SmartClean system on a stable,
level and horizontal surface to prevent leakage.
- Always make sure that the cartridge compartment
is closed before you use the SmartClean system
to clean or charge the shaver.
- When the SmartClean system is ready for use,
do not move it to prevent leakage of cleaning uid.
- The SmartClean system thoroughly cleans but
does not disinfect your shaver, therefore do not
share the shaver with others.
- Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol
or acetone to clean the appliance.
- Water may leak from the socket at the bottom
of the shaver when you rinse it.This is normal
and not dangerous because all electronics are
enclosed in a sealed power unit inside the shaver.
Compliance with standards
- This shaver is waterproof and complies with the
internationally approved safety regulations. It is
suitable for use in the bath or shower and for
cleaning under the tap. For safety reasons, the
shaver can therefore only be used cordlessly.
- The shaver and the SmartClean system comply
with all applicable standards and regulations
regarding exposure to electromagnetic elds.
General
- The adapter is equipped with an automatic
voltage selector and is suitable for mains voltages
ranging from 100 to 240 volts.
- The adapter transforms 100-240 volts to a safe
low voltage of less than 24 volts.
- Maximum noise level: Lc = 69dB(A)
ENGLISH14

The display
Note: Before you use the shaver for the rst time,
remove the protective foil from the display.
- S91XX/S90XX
Charging
- Charging takes approx. 1 hour.
Note:This appliance can only be used cordlessly.
- Quick charge:When you connect the appliance
to the mains, it produces a sound.Then the lights
of the battery charge indicator light up one after
the other continuously.When the shaver contains
enough energy for one shave, the bottom light of
the battery charge indicator starts to ash slowly.
- If you leave the appliance connected to the
mains, the charging process continues.To indicate
that the appliance is charging, rst the bottom
light ashes white and then lights up white
continuously. Then the second light ashes and
then lights up continuously, and so on until the
shaver is fully charged.
Battery fully charged
Note:This appliance can only be used cordlessly.
Note: When the battery is full, the display switches
off automatically after 30 minutes.When you press
the on/off button during or after charging, you hear a
sound to indicate that the shaver is still connected to
the mains.
ENGLISH 15

- When the battery is fully charged, all lights of
the battery charge indicator light up white
continuously.
Battery low
- When the battery is almost empty, the bottom
light ashes orange and you hear a sound.
Remaining battery capacity
- The remaining battery capacity is indicated by the
lights of the battery charge indicator that light up
continuously.
Cleaning reminder
For optimal shaving performance, we advise you to
clean the shaver after every use.
- When you switch off the shaver, the cleaning
reminder ashes to remind you to clean the
shaver.
Travel lock
You can lock the shaver when you are going to
travel.The travel lock prevents the shaver from being
switched on by accident.
ENGLISH16

Activating the travel lock
1 Press the on/off button for 3 seconds to enter
the travel lock mode.
,While you activate the travel lock, the travel lock
symbol lights up white continuously.When the
travel lock is activated, the shaver produces a
sound and the travel lock symbol ashes.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
,The travel lock symbol ashes and then lights
up continuously.
The shaver is now ready for use again.
Note:You can also deactivate the travel lock by
connecting the appliance to the mains.
Replacing shaving heads
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
- The appliance is equipped with a replacement
reminder which reminds you to replace the
shaving heads.The replacement reminder lights
up white continuously and the arrows ash white.
You hear a beep to indicate you have to replace
the shaving heads.
Note: After replacing the shaving heads, you need
to reset the shaver by pressing the on/off button for
7 seconds.
ENGLISH 17

Exclamation mark
Blocked shaving heads
- If the shaving heads are blocked, the exclamation
mark lights up orange continuously.The replacement
reminder and the cleaning reminder ash white
alternately and you hear a sound. In this case,
the motor cannot run because the shaving heads
are soiled or damaged.
- When this happens, you have to clean the shaving
heads or replace them.
Overheating
- If the appliance overheats during charging, the
exclamation mark ashes orange.
- When this happens, the shaver automatically
switches off. Charging continues once the
appliance is back to the normal temperature.
Charging
Charging takes approx. 1 hour.
A fully charged shaver has a shaving time of up to
50 minutes.
Note:You cannot use the appliance while charging.
Charge the shaver before you use it for the rst
time and when the display indicates that the battery
is almost empty .
ENGLISH18

Charging with the adapter
1 Make sure the appliance is switched off.
2 Insert the small plug into the appliance (1)
and put the adapter in the wall socket (2).
Charging in the SmartClean system
(specic types only)
1 Put the small plug in the SmartClean system.
2 Put the adapter in the wall socket.
3 Press the top cap to be able to place the
shaver in the holder (‘click’).
4 Hold the shaver upside down above the holder.
Make sure the front of the shaver points
towards the SmartClean system.
5 Place the shaver in the holder (1), tilt the
shaver backwards (2) and press down the top
cap to connect the shaver (‘click’) (3).
Note: The battery symbol ashes slowly to indicate the
appliance is charging.
ENGLISH 19

Using the shaver
Shaving
Skin adaptation period
Your rst shaves may not bring you the result you
expect and your skin may even become slightly
irritated.This is normal.Your skin and beard need
time to adapt to any new shaving system.
We advise you to shave regularly (at least 3 times a
week) with this shaver for a period of 3 weeks
to allow your skin to adapt to the new shaver.
Tip: To ensure the best result, we advise you to pre-trim
your beard if you have not shaved for 3 days or longer.
Note:This appliance can only be used cordlessly.
1 Press the on/off button once to switch on
the shaver.
,The display lights up for a few seconds.
2 Move the shaving heads over your skin in
circular movements.
- Do not make straight movements.
3 Press the on/off button once to switch off
the shaver.
,The display lights up for a few seconds and then
shows the remaining battery charge.
Wet shaving
You can also use this shaver on a wet face with
shaving foam or shaving gel.
To shave with shaving foam or shaving gel,
follow the steps below:
ENGLISH20