ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Shaver
HQ8893
SENSOTEC
4322 277 01095
02/11
PRODUCT INFORMATION
- Rechargeable / Main shaver
- Constant motor voltage
- Electronic push on/off
- Washable
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Voltage : 100 - 240 Volt
- Frequency : 50 - 60 Hz
- Motor voltage : 2,4 Volt
- Speed of cutters : > 2100 r.p.m.
- Shaving heads : HQ8 - 4222 036 05820
- Battery capacity indication : LCD
- Battery full indication : LCD
- Battery low indication : LCD + audible
- Charge indication : LCD
- Battery : AA pack NiMH (green)
- SAP coding : HQ8893
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
Disassembly:
- Remove shaving unit, to prevent damages during
repairing.
- Remove screws A1 (2x).
- Take cover from housing (trimmer must be opened).
- Remove bracket large (17). (see figure 1)
- The PCB-board can now be removed out of the
housing.
- Remove the connecting strip from the motor by
dis soldering.
- Remove screws B1 (2 x), now the motor and hairchamber
can be removed out of the housing.
- Detach the motor springs (14) from the gearwheel unit
with a small screwdriver.
- For removing the LCD you need a torx screwdriver, set it
under the LCD bracket and turn the screwdriver.
(see figure 2)
Assembly:
- Think by assembly on the
hooks from the connecting
strip assy. (see figure 3)
figure 3
figure 1 figure 2
