Philips SP9890 User manual

www.philips.com/support/ifu-lux
SP9890

6
21
19
20
18
17
16
15
14
13
12
11
8
10
9
1
2
3
7
4
5
22

empty page before TOC

English 6
简体中文 36

English
6English
Introduction
Congratulations on your purchase and welcome to
Philips! To fully benefit from the support that Philips
offers, register your product at
www.philips.com/welcome.
Please read this user manual, as it contains information
about the features of this shaver as well as some tips to
make shaving easier and more enjoyable.
General description (Fig. 1)
1 Protection cap for cleansing brush attachment
2 Click-on cleansing brush attachment
3 Attachment holder
4 Supply unit
5 USB plug
6 Wireless Qi charging pad
7 Pouch
8 Replacement reminder
9 Notification symbol
10 Cleaning reminder
11 Travel lock symbol
12 Battery charge indicator
13 Battery charge percentage
14 Personal comfort settings bar
15 Personal comfort settings decrease button
16 Personal comfort settings increase button
17 On/off button
18 Shaving unit with hair chamber
19 Click-on precision trimmer attachment
20 Click-on beard styler attachment
21 Comb for beard styler attachment
22 Click-on nose trimmer attachment
The accessories supplied may vary for different products.
The box shows the accessories that have been supplied
with your appliance.
Important safety information
Read this important information carefully before you use
the appliance and its accessories and save it for future

7
English
reference. The accessories supplied may vary for different
products.
Danger
- Keep the supply unit dry.
Warning
- The appliance is a Class III construction.
- To charge the battery, only use the detachable supply
unit and charging pad (supply unit, type HQ87.
Charging pad, type HQ8509 or HQ8510) provided
with the appliance.
- Do not use a USB extension cord.
- This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
- Always check the appliance and its attachments
before you use it. Do not use the appliance or its
attachments if it is damaged, as this may cause injury.
Always replace a damaged part with one of the
original type.
- Do not open the appliance to replace the
rechargeable battery.
- The charging pad is not intended for use in a car. It
may interfere with the automotive electronic systems.
Caution
- Never immerse the charging pad in water, nor rinse it
under the tap.

8English
- Always make sure the charging pad is completely dry
before you connect it to the wall socket.
- Never use water hotter than 60°C to rinse the shaver.
- Only use this appliance for its intended purpose as
shown in the user manual.
- For safety reasons, do not use the shaver while you
drive a car.
- For hygienic reasons, the appliance should only be
used by one person.
- Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol or
acetone to clean the appliance.
- Do not put the appliance or any part in the
dishwasher.
- Water may trickle out of the shaver after you rinse it.
This is normal and not dangerous because all
electronics are enclosed in a sealed power unit inside
the shaver.
- Do not use the supply unit in or near wall sockets that
contain an electric air freshener to prevent irreparable
damage to the supply unit.
- Do not use the cleansing brush on chapped skin, open
wounds, healing wounds, skin recovering from
surgery or if you suffer from a skin disease or severe
skin irritation, such as severe acne, sunburn, skin
infection, skin cancer, inflammation, eczema,
psoriasis, nylon allergy etc.
- Do not use the cleansing brush if you take steroid-
based medication.
- If you wear piercings on your face, remove the
piercings before you use the click-on attachments or
make sure that you do not use the appliance on or
near the piercing.
- If you wear jewelry, contact lenses or glasses, remove
them before you use the click-on attachments, or
make sure that you do not use the appliance on or
near jewelry or glasses.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.

9
English
General
- This shaver is waterproof. It is suitable for use in the
bath or shower and for cleaning under the tap.
- The supply unit is suitable for mains voltages ranging
from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a safe low
voltage of less than 24 volts.
The display
Note: Remove any sticker or protective foil from the
display before using the product.
Charging
When the shaver is charging, the ring on the pad lights
up and the battery charge indicator on the shaver flashes
white.
The battery charge is indicated by the battery charge
percentage flashing on the display, which is shown when
the shaver is moved.
Quick charge: After approx. 18 minutes charging, the
appliance contains enough energy for one shave.
Battery fully charged
When the battery is fully charged, the battery charge
indicator and the ring on the pad light up white
continuously.
Note: Both lights switch off automatically after 15
minutes.
The battery charge percentage lights up white
continuously, which is shown when the shaver is moved.
Battery low
When the battery is almost empty, the battery charge
indicator flashes orange and the shaver beeps. At this
point there is enough energy left for one shave..

10 English
Remaining battery charge
The remaining battery charge is indicated by the battery
charge percentage shown on the display.
Personal comfort settings
The shaver has a feature that allows you to personalize
your settings. Depending on your personal shaving
needs, choose between three settings, from low to high:
comfort, dynamic or efficiency. When you press the
button on the left or right of the display, the segment of
the personal comfort settings bar lights up to indicate the
selected setting. To select a lower or higher setting, press
the button on the left or right of the display.
Cleaning reminder
Clean the shaver after every use for optimal performance
(see 'Cleaning and maintenance'). When you switch off
the shaver, the cleaning reminder flashes to remind you
to clean the shaver.
Travel lock
3 sec.
When you are going to travel, you can lock the shaver to
prevent it from accidentally switching on (see 'Activating
the travel lock').

11
English
Replacement reminder
For maximum shaving performance, replace the shaving
heads every two years. The shaver is equipped with a
replacement reminder which reminds you to replace the
shaving heads. The shaver beeps, the replacement
reminder lights up and the arrows flash to indicate that
you have to replace the shaving heads.
Note: After replacing the shaving heads, you can reset
the replacement reminder by pressing the on/off button
for 7 seconds. If you do not reset the replacement
reminder, the shaver resets automatically after 9 shaves.
Notification symbol
Overheating
If the shaver overheats during charging, the notification
symbol flashes. When this happens, the shaver stops
charging automatically. Charging continues once the
temperature of the shaver has decreased to the normal
level after approx. 10 minutes.
Blocked shaving heads
If the shaving heads are blocked, the notification symbol
continuously lights up red. The replacement reminder
and the cleaning reminder alternately flash white and the
shaver beeps. In this case, the motor cannot run because
the shaving heads are dirty or damaged. If the shaving
heads are dirty, you have to clean them. If the shaving
heads are damaged, you have to replace them.
Foreign object on wireless Qi charging pad
If there is a foreign (metal) object on the wireless Qi
charging pad during charging, the notification symbol on
the wireless Qi charging pad lights up. The wireless Qi
charging pad switches off automatically and restarts 5
minutes after the foreign object has been removed.
Do not place any foreign (metal) objects on the
wireless Qi charging pad. Only use the wireless Qi
charging pad to charge the shaver or another device
(e.g. smartphone) compliant with Qi charging.

12 English
Charging
Charge the shaver before you use it for the first time and
when the display indicates that the battery is almost
empty.
Charging takes approx. 3 hours. A fully charged shaver
has a shaving timeof up to 60 minutes.
After approx. 18 minutes of charging the shaver contains
enough power for one shave.
Note: You cannot use the shaver while it is charging.
Quick charge
After approx. 18 minutes of charging the shaver contains
enough power for one shave.
Charging with the wireless Qi charging pad
Note: The charging pad is Qi compliant. Only charge the
Qi compatible shaver or other Qi charging compliant
appliances on the wireless Qi charging pad provided.
Note: Carefully shake off excess water before placing the
shaver on the Qi pad.
1Put the USB plug in the supply unit supplied.
2
1
2Put the supply unit in the wall socket.
Place the shaver on the cross mark of the wireless Qi
charging pad. Make sure the shaver fits into the cavity
of the wireless Qi charging pad.
Only charge the shaver on the provided wireless Qi
charging pad.

13
English
- The wireless Qi charging pad beeps and the ring on
the pad lights up when the shaver is correctly placed
and connected for charging.
- When the shaver is charging, the ring on the pad
lights up and the battery charge indicator on the
shaver flashes white. The battery charge is indicated
by the battery charge percentage flashing on the
display, which is shown when the shaver is moved.
3When the battery is fully charged, the battery charge
indicator and the ring on the pad light up white
continuously. Both lights switch off automatically
after 15 minutes.
Using the shaver
Always check the shaver and all accessories before
use. Do not use the shaver or any accessory if it is
damaged, as this may cause injury. Always replace a
damaged part with one of the original type.
This symbol indicates that the shaver can be used in the
bath or shower.
- Use this shaver for its intended household use as
described in this manual.
- For hygienic reasons, the shaver should only be used
by one person.
- Trimming is easier when the skin and hair are dry.
Note: This shaver is waterproof. It is suitable for use in the
bath or shower and for cleaning under the tap. For safety
reasons, the shaver can only be used without cord.
Switching the shaver on and off
1To switch on the shaver, press the on/off button once.
The battery charge percentage lights up for a few
seconds.
2To switch off the shaver, press the on/off button once.
The battery charge percentage lights up for a few
seconds and shows the remaining battery charge.

14 English
Shaving
Skin adaptation period
Your first shaves may not bring you the result you expect
and your skin may even become slightly irritated. This is
normal. Your skin and beard need time to adapt to any
new shaving system. To allow your skin to adapt to this
new appliance, we advise you to shave regularly (at least
3 times a week) and exclusively with this appliance for a
period of 3 weeks.
Shaving tips
- For the best results on skin comfort, pre-trim your
beard if you have not shaved for 3 days or longer.
- Select your personal comfort setting (see 'Personal
comfort settings').
Dry shaving
1Switch on the shaver.
2Move the shaving heads over your skin in circular
movements to catch all hairs growing in different
directions. Make sure each shaving head is fully in
contact with the skin. Exert gentle pressure for a close,
comfortable shave.
Note: Do not press too hard, as this can cause skin
irritation.
3Switch off and clean the shaver after each use (see
'Cleaning and maintenance').
The display lights up for a few seconds to show the
remaining battery charge.
Wet shaving
For a more comfortable shave, you can also use this
appliance on a wet face with shaving foam or shaving
gel.
1Apply some water to your skin.

15
English
2Apply shaving foam or shaving gel to your skin.
3Rinse the shaving unit under the tap to ensure that
the shaving unit glides smoothly over your skin.
4Switch on the shaver.
5Move the shaving heads over your skin in circular
movements to catch all hairs growing in different
directions. Make sure each shaving head is fully in
contact with the skin. Exert gentle pressure for a close,
comfortable shave.
Note: Do not press too hard, as this can cause skin
irritation.
Note: Rinse the shaving unit regularly to ensure that it
continues to glide smoothly over your skin.
6Dry your face.
7Switch off the shaver and clean it after each use.
Note: Make sure that you rinse all foam or shaving gel off
the shaver.
Using click-on attachments
It is recommended not to use the click-on cleansing brush
attachment directly after shaving to prevent skin
irritation.
Removing or attaching click-on attachments
1Make sure the shaver is switched off.

16 English
2Pull the attachment straight off the shaver.
Note: Do not twist the attachment while you pull it off
the shaver.
3Insert the lug of the attachment into the slot in the
top of the shaver. Then press down the attachment to
attach it to the shaver (‘click’).
Attachment holder
Note: Attach the click-on cleansing brush attachment on
the attachment holder first, before you place the
attachment onto the appliance.
1Place the click-on attachment onto the attachment
holder until it locks into position with a click.
Using the precision trimmer attachment
You can use the precision trimmer attachment to touch
up your beard, sideburns and moustache.
1Attach the attachment to the appliance (‘click’).
2Switch on the appliance.
3Hold the precision trimmer perpendicular to the skin
and move it downwards while exerting gentle
pressure.
4Switch off the appliance and clean the attachment
after use.

17
English
Using the beard styler attachment with comb
You can use the beard styler with the comb attached to
style your beard at one fixed setting, but also at different
length settings. You can also use it to pre-trim any long
hairs before shaving for a more comfortable shave.
Note: The beard styler is only intended for trimming facial
hair. Do not use on areas below the neck.
The length settings on the beard styler attachment
correspond to the remaining hair length after cutting and
range from 1 to 5mm (3/64 - 3/16in).
1Attach the attachment to the appliance ('click').
2Slide the comb straight into the guiding grooves on
both sides of the beard styler attachment (‘click’).
1
2
3Press the length selector and then push it to the left or
right to select the desired hair length setting.
4Switch on the appliance.
5Move the appliance upwards while you exert gentle
pressure. Make sure the front of the comb is in full
contact with the skin.
6Clean the attachment after use.

18 English
Using the beard styler attachment without comb
You can use the beard styler attachment without the
comb to contour your beard, moustache, sideburns or
neckline at a length of 0.5mm (1/32in).
Note: The beard styler is only intended for trimming facial
hair. Do not use it on areas below the neck.
1Pull the comb off the beard styler attachment.
Note: Grab the comb in the center to pull it off the
beard styler attachment. Do not pull at the sides of
the comb.
2Switch on the appliance.
3Hold the beard styler attachment perpendicular to the
skin and move the appliance downwards while you
exert gentle pressure.
4Clean the attachment after use.
Using the cleansing brush attachment
Note: For better shaving results, use the click-on
cleansing brush attachment before shaving.
Use the rotating cleansing brush with your daily cleansing
cream. The cleansing brush removes oil and dirt,
contributing to a healthy and oil-free skin. We advise you
to use it no more than twice a day. Start with the lowest
personal comfort setting to familiarize yourself with the
attachment.
Do not use the appliance on damaged or irritated skin
or on wounds.
1Place the attachment on the attachment holder.

19
English
2Attach the attachment to the appliance (‘click’).
3Moisten the attachment with water.
Note: Do not use the appliance with a dry cleansing
brush attachment, as this can irritate the skin.
4Moisten your face with water and apply a cleanser to
your face.
5Place the attachment on your cheek.
6Switch on the appliance.
20 sec.
7Gently move the brush across your skin from the nose
towards the ear. Do not push the brush too hard onto
the skin to make sure that the treatment remains
comfortable.
Note: Do not cleanse the sensitive area around your
eyes.
20 sec.
8After approx. 20 seconds, move the appliance to your
other cheek and start cleansing this part of your face.
20 sec.
9After approx. 20 seconds, move the appliance to your
forehead and start cleansing this part of your face.
Gently move the brush head from left to right.
Note: We advise you to not overdo the cleansing and
to not cleanse any zone longer than 20 seconds.
10 Switch off the appliance and clean the attachment
after use.

20 English
11 After the treatment, rinse and dry your face. Your face
is now ready for the next step of your daily skincare
routine.
Using the nose/ear trimmer attachment
You can use the nose/ear trimmer attachment to trim
your nose and/or ear hair.
Trimming nose hair
When trimming nose hair, make sure your nostrils are
clean.
1Attach the attachment to the appliance (‘click’).
2Switch on the appliance.
max.
5mm
3Carefully insert the trimming head into one of your
nostrils.
Do not insert the attachment more than 0.5cm into
your nostrils.
4Slowly move the trimming head around to remove all
unwanted hairs in your nostrils.
5Switch off the appliance and clean the attachment
after use.
Trimming ear hair
When trimming ear hair, make sure your outer ear
channels are clean and free from wax.